Berkeley Lab
Bringing Science Solutions to the World

Engineering Division 2019 Publications

by

This site will be updated on a regular basis.

Electronics, Software, and Instrumentation Engineering Department

  • O. Agazzi et al., (2019) “High-speed receiver architecture,” (U.S. Patent 10505638). U.S. Patent and Trademark Office, Link

 
  • Z. Ahmed et al., “New Technologies for Discovery,” arXiv preprint arXiv:1908.00194, (1 Aug. 2019), Link

 
  • Z. Ahmed et al., “A report of the 2018 DPF coordinating panel for advanced detectors (CPAD) community workshop,” Free radical biology & medicine, (31 Jul. 2019), Link

 
  • Anderson, Christopher, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 26 March 2019. Link

 
  • Anker, A., et al. “Neutrino vertex reconstruction with in-ice radio detectors using surface reflections and implications for the neutrino energy resolution.” Journal of Cosmology and Astroparticle Physics 2019.11 (2019): 030. Link

 
  • V. Arsov, et al. “First results from the bunch arrival-time monitors at SwissFEL.” Proceedings of the 2018 International Beam Instrumentation Conference. 2019. Link

 
  • Betz, M., et al. “Low phase noise master oscillator generation and distribution for ALS and ALS-U.” arXiv preprint arXiv:1910.07111 (16 Oct. 2019). Link

 
  • Caminata, Alessio, et al. “Results from the CUORE experiment.” Universe 5.1 (2019): 10, Link

 
  • C. Chen et l., “A gigabit transceiver for the ATLAS inner tracker pixel detector readout upgrade,” JINST 14 C07005, (10 Jul. 2019), Link

 
  • P. Chevtsov, et al. “SwissFEL Electron Beam Diagnostics Tools and their Control System Components.” 12th Int. Workshop on Emerging Technologies and Scientific Facilities Controls (PCaPAC’18), Hsinchu, Taiwan, 16-19 October 2018. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • Ciston, Jim, et al. “The 4D camera: very high speed electron counting for 4D-STEM.” Microscopy and Microanalysis 25.S2 (2019): 1930-1931. Link

 
  • Doolittle, Lawrence, et al. Bedrock v1. 0. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019, Link

 
  • L. Doolittle, et al., Bedrock v1.0. Computer software. https://www.osti.gov//servlets/purl/1568054. USDOE. 11 Sep. 2019. Web. doi:10.11578/dc.20191001.2. Link

 
  • Du, Qiang, et al. “Digital Low-Level RF control system for Advanced Light Source Storage Ring.” arXiv preprint arXiv:1910.07175 (2019), Link

 
  • Du, Qiang, et al. “Deterministic stabilization of eight-way 2d diffractive beam combining using pattern recognition.” Optics letters 44.18 (2019): 4554-4557, Link

 
  • Gaioni, Luigi, et al. “RD53 analog front-end processors for the ATLAS and CMS experiments at the High-Luminosity LHC.” 28th International Workshop on Vertex Detectors (Vertex 2019). Sissa Medialab, 2019. Link

 
  • Gaioni, Luigi, and RD53 Collaboration. “Test results and prospects for RD53A, a large scale 65 nm CMOS chip for pixel readout at the HL-LHC.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 936 (2019): 282-285. Link

 
  • C. Grace, T. Stezelberger and P. Denes, “PETAL: A Multichannel Differential ADC Driver for High-Speed CMOS Image Sensors,” in IEEE Transactions on Nuclear Science, vol. 66, no. 6, pp. 955-959, (June 2019), doi: 10.1109/TNS.2019.2916972.

 
  • N. Hasan, B. Hou and A. D. Radadia, “Ion Sensing With Solution-Gated Graphene Field-Effect Sensors in the Frequency Domain,” in IEEE Sensors Journal, vol. 19, no. 19, pp. 8758-8766, 1 October 2019, doi: 10.1109/JSEN.2019.2921706.

 
  • Hovater, Curt, et al. Commissioning the JLab LERF Cryomodule Test Facility. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019, Link

 
  • Lacey, Ian, et al. “Transfer of autocollimator calibration for use with scanning gantry profilometers for accurate determination of surface slope and curvature of state-of-the-art x-ray mirrors.” Advances in Metrology for X-Ray and EUV Optics VIII. Vol. 11109. International Society for Optics and Photonics, (2 October 2019). https://doi.org/10.1117/12.2529519

 
  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • The NEXT collaboration., Henriques, C.A.O., Monteiro, C.M.B. et al. Electroluminescence TPCs at the thermal diffusion limit. J. High Energ. Phys. 2019, 27 (2019). https://doi.org/10.1007/JHEP01(2019)027

 
  • A. Papadopoulou, et al. “A 40mW/channel Image Sensor Line Driver IC with Independently Tunable Gain and Settling Time.” 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE. Link

 
  • C. Rivetta and L. Doolittle, “EMC issues in RF stations for particle accelerators,” 2019 International Symposium on Electromagnetic Compatibility – EMC EUROPE, 2019, pp. 784-789, doi: 10.1109/EMCEurope.2019.8871751. Link

 
  • C. Serrano, et al. “Hardware-in-the-Loop Testing of Accelerator Firmware.” (2019). Link

 
  • Shen, Tengming, Daniel Davis, and Marcos Turqueti. “Hazard Analysis and Operation Control of a Coupling-Loss Induced Quench System at the Magnet Test Facility at B58.” (July 2019). Link

 
  • Shen, Tengming, et al. “Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the wire current density of 1000 A/mm2.” Scientific reports 9.1 (July 2019): 1-9. Link

 
  • Sirunyan, Albert M., et al. “Measurements of the Higgs boson width and anomalous H V V couplings from on-shell and off-shell production in the four-lepton final state.” Physical Review D 99.11 (11 June 2019): 112003. Link

 
  • Sirunyan, Albert M., et al. “Performance of missing transverse momentum reconstruction in proton-proton collisions at√ s= 13 TeV using the CMS detector.” (2019). Link

 
  • Sirunyan, Albert M., et al. “Pseudorapidity distributions of charged hadrons in xenon-xenon collisions at sNN= 5.44 TeV.” Physics Letters B 799 (10 Dec 2019): 135049. Link

 
  • Sirunyan, Albert M., et al. “Search for long-lived particles using delayed photons in proton-proton collisions at s= 13 TeV.” Physical Review D 100.11 (9 Dec 2019): 112003. Link

 
  • Sirunyan, Albert M., et al. “Constraints on anomalous H V V couplings from the production of Higgs bosons decaying to τ lepton pairs.” Physical Review D 100.11 (4 Dec 2019): 112002. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019, Link

 

Magnetics Engineering Department

  • D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605, doi: 10.1109/TASC.2019.2898595. Link

 
  • L. Brouwer, et al., “User defined elements in ANSYS for 2D multiphysics modeling of superconducting magnets,” Superconductor Science and Technology, vol. 32, no. 9, p. 095011, Sep. 2019, doi: 10.1088/1361-6668/ab2e63. Link

 
  • M. Duda et al., “Power Test of the Second-Generation Compact Linear Collider (CLIC) Nb3Sn Damping Wiggler Short Model,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100405, doi: 10.1109/TASC.2019.2896774. Link

 
  • H. Felice et al., “F2D2: A Block-Coil Short-Model Dipole Toward FCC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 4001807, doi: 10.1109/TASC.2019.2897054.

 
  • L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002005, doi: 10.1109/TASC.2019.2896725.

 
  • M. Juchno et al., “Mechanical Utility Structure for Testing High Field Superconducting Dipole Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-4, Aug. 2019, Art no. 4001604, doi: 10.1109/TASC.2019.2896044.

 
  • M.Leitner, et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), (24 May 2019). Link

 
  • O. Malyshev, et al., “Vacuum Chamber at Cryogenic Temperatures.” Vacuum in Particle Accelerators: Modelling, Design and Operation of Beam Vacuum Systems (2019): 269-348. Link

 
  • G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906, doi: 10.1109/TASC.2019.2897326. Link

 
  • H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4100706, doi: 10.1109/TASC.2019.2901589.

 
  • F. Pierro et al., “Finite-Element Analysis of the Strain Distribution Due to Bending in a REBCO Coated Conductor for Canted Cosine Theta Dipole Magnet Applications,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4600705, doi: 10.1109/TASC.2019.2897708.

 
  • F. Pierro, M. Delgado, L. Chiesa, X. Wang and S. O. Prestemon, “Measurements of the Strain Dependence of Critical Current of Commercial REBCO Tapes at 15 T Between 4.2 and 40 K for High Field Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 8401305, doi: 10.1109/TASC.2019.2902458.

 
  • D. Schoerling et al., “The 16 T Dipole Development Program for FCC and HE-LHC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-9, Aug. 2019, Art no. 4003109, doi: 10.1109/TASC.2019.2900556.

 
  • C. Steier, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low-$\beta$ Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000605, doi: 10.1109/TASC.2019.2892126.

 
  • G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002805, doi: 10.1109/TASC.2019.2898327.

 
  • X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low-$\beta$ Nb$_3$Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706, doi: 10.1109/TASC.2019.2892119. Link

 
  • Wang, Xiaorong, Stephen A. Gourlay, and Soren O. Prestemon. “Dipole magnets above 20 tesla: Research needs for a path via high-temperature superconducting REBCO conductors.” Instruments 3.4 (2019): 62, Link

 
  • Wang, Xiaorong, et al. “A 1.2 T canted cosθ dipole magnet using high-temperature superconducting CORC® wires.” Superconductor Science and Technology 32.7 (2019): 075002, Link

 

Manufacturing Engineering & CAD Department

  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • Leitner, M., et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019. Link

 
  • Neben, Derek, et al. “X-ray investigation on the Superconducting Source for Ions (SuSI).” Journal of Instrumentation 14.02 (19 Feb 2019): C02008. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • White, Ashley, et al. “A New Light for Berkeley Lab—the Advanced Light Source Upgrade.” Synchrotron Radiation News 32.1 (7 Feb 2019): 32-36. Link

 

Mechanical Engineering Department

  • A. Abada, et al. “HE-LHC: The high-energy large hadron collider.” The European Physical Journal Special Topics 228.5 (1 July 2019): 1109-1382. Link

 
  • A. Abada, et al. “FCC-hh: The hadron collider.” The European Physical Journal Special Topics 228.4 (1 July 2019): 755-1107. Link

 
  • A. Abada, et al. “FCC-ee: the lepton collider.” The European Physical Journal Special Topics 228.2 (1 June 2019): 261-623. Link

 
  • A. Abada, et al. “FCC physics opportunities.” The European Physical Journal C 79.6 (1 June 2019): 1-161. Link

 
  • Abbott, B. P., et al. “Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model.” Physical Review D 100.12 (4 Dec 2019): 122002. Link

 
  • Abbott, Benjamin P., et al. “Search for gravitational-wave signals associated with gamma-ray bursts during the second observing run of Advanced LIGO and Advanced Virgo.” The Astrophysical Journal 886.1 (21 Nov 2019): 75. Link

 
  • Abbott, B. P., et al. “Tests of general relativity with the binary black hole signals from the LIGO-Virgo catalog GWTC-1.” Physical Review D 100.10 (20 Nov 2019): 104036. Link

 
  • C. Anderson, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 2019. Link

 
  • D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605, doi: 10.1109/TASC.2019.2898595.

 
  • Barsotti, Lisa, et al. “Effects of transients in LIGO suspensions on searches for gravitational waves.” (2019). Link

 
  • S. Izquierdo,Bermudez, et al. “Mechanical analysis of the Nb3Sn 11 T dipole short models for the High Luminosity Large Hadron Collider.” Superconductor Science and Technology 32.8 (3 May 2019): 085012. Link

 
  • Y.D. Chuang, et al. “Momentum-resolved resonant inelastic soft X-ray scattering (qRIXS) endstation at the ALS.” Journal of Electron Spectroscopy and Related Phenomena (2019): 146897. Link

 
  • D. Corrigan, K. Sooknanan, J. Doyle, C. Lordan and A. Kokaram, “A Low-Complexity Mosaicing Algorithm for Stock Assessment of Seabed-Burrowing Species,” in IEEE Journal of Oceanic Engineering, vol. 44, no. 2, pp. 386-400, April 2019, doi: 10.1109/JOE.2018.2808973.

 
  • Duan, Yutong, et al. “Focal plate structure alignment of the Dark Energy Spectroscopic Instrument.” Journal of Astronomical Telescopes, Instruments, and Systems 5.1 (2019): 014003. https://doi.org/10.1117/1.JATIS.5.1.014003

 
  • Á. Fernández-Galiana et al., “A compact actively damped vibration isolation platform for optical experiments in ultra-high vacuum,” Jan. 2019, [Online]. Available: http://arxiv.org/abs/1901.09666

 
  • P. Ferracin et al., “Mechanical Analysis of the Collaring Process of the 11 T Dipole Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002705, doi: 10.1109/TASC.2019.2899284.

 
  • C. Fichera, A. Bertarelli, P. Ferracin, M. Guinchard, O. Sacristán de Frutos and G. Vallone, “New Methodology to Derive the Mechanical Behavior of Epoxy-Impregnated Nb3Sn Cables,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 7, pp. 1-12, Oct. 2019, Art no. 8401912, doi: 10.1109/TASC.2019.2905224.

 
  • L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002005, doi: 10.1109/TASC.2019.2896725.

 
  • Huschke, et al. Permanent Magnet Dipole-Quadrupole and Correcto-Tuner for Small Bore Accelerators. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019. Link

 
  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019, Link

 
  • Leitner, M., et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019, Link

 
  • Leitner, Daniela. “High Performance ECR Sources for Next-Generation Nuclear Science Facilities.” 10th International Particle Accelerator Conference, Melbourne, Australia, JACoW Publishing. 2019. Link

 
  • Lin, Fang-Ming, Eric Anderssen, and Raymond K. Yee. “Heat Transfer Interface to Graphitic Foam.” ASME International Mechanical Engineering Congress and Exposition. Vol. 59452. American Society of Mechanical Engineers, 2019, Link

 
  • G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906, doi: 10.1109/TASC.2019.2897326.

 
  • H. Pan, E. C. Anderssen, D. W. Cheng, S. O. Prestemon and G. Ambrosio, “Failure Assessments for MQXF Magnet Support Structure With a Graded Approach,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 8401507, doi: 10.1109/TASC.2019.2908113.

 
  • H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4100706, doi: 10.1109/TASC.2019.2901589.

 
  • I. Pong, L. D. Cooley, A. Lin, H. C. Higley and C. Sanabria, “Diameter Quality Control of Nb3Sn Wires for MQXF Cables in the USA,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 6001505, doi: 10.1109/TASC.2019.2909238.

 
  • D. Reitze et al., “The US Program in Ground-Based Gravitational Wave Science: Contribution from the LIGO Laboratory,” Mar. 2019. [Online]. Available: https://arxiv.org/abs/1903.04615

 
  • R. Soufli, et al. “Optical constants of magnetron sputtered Pt thin films with improved accuracy in the N-and O-electronic shell absorption regions.” Journal of Applied Physics 125.8 (2019): 085106. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002805, doi: 10.1109/TASC.2019.2898327.

 
  • G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low-$\beta$ Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000605, doi: 10.1109/TASC.2019.2892126.

 
  • S. Vitale, et al., “Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO.” (2019). Link

 
  • X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low-$\beta$ Nb$_3$Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706, doi: 10.1109/TASC.2019.2892119.

 
  • S. Yin, D. Arbelaez, J. Swanson and T. Shen, “Epoxy Resins for Vacuum Impregnating Superconducting Magnets: A Review and Tests of Key Properties,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 7800205, doi: 10.1109/TASC.2019.2898124.