Berkeley Lab
Bringing Science Solutions to the World

Engineering Division 2019 Publications

by

This site will be updated on a regular basis.

Electronics, Software, and Instrumentation Engineering Department

  • O. Agazzi et al., (2019) “High-speed receiver architecture,” (U.S. Patent 10505638). U.S. Patent and Trademark Office, Link

 
  • Z. Ahmed et al., “New Technologies for Discovery,” arXiv preprint arXiv:1908.00194, (1 Aug. 2019), Link

 
  • Z. Ahmed et al., “A report of the 2018 DPF coordinating panel for advanced detectors (CPAD) community workshop,” Free radical biology & medicine, (31 Jul. 2019), Link

 
  • Anderson, Christopher, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 26 March 2019. Link

 
  • Anker, A., et al. “Neutrino vertex reconstruction with in-ice radio detectors using surface reflections and implications for the neutrino energy resolution.” Journal of Cosmology and Astroparticle Physics 2019.11 (2019): 030. Link

 
  • V. Arsov, et al. “First results from the bunch arrival-time monitors at SwissFEL.” Proceedings of the 2018 International Beam Instrumentation Conference. 2019. Link

 
  • Betz, M., et al. “Low phase noise master oscillator generation and distribution for ALS and ALS-U.” arXiv preprint arXiv:1910.07111 (16 Oct. 2019). Link

 
  • Caminata, Alessio, et al. “Results from the CUORE experiment.” Universe 5.1 (2019): 10, Link

 
  • C. Chen et l., “A gigabit transceiver for the ATLAS inner tracker pixel detector readout upgrade,” JINST 14 C07005, (10 Jul. 2019), Link

 
  • P. Chevtsov, et al. “SwissFEL Electron Beam Diagnostics Tools and their Control System Components.” 12th Int. Workshop on Emerging Technologies and Scientific Facilities Controls (PCaPAC’18), Hsinchu, Taiwan, 16-19 October 2018. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • Ciston, Jim, et al. “The 4D camera: very high speed electron counting for 4D-STEM.” Microscopy and Microanalysis 25.S2 (2019): 1930-1931. Link

 
  • Doolittle, Lawrence, et al. Bedrock v1. 0. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019, Link

 
  • L. Doolittle, et al., Bedrock v1.0. Computer software. https://www.osti.gov//servlets/purl/1568054. USDOE. 11 Sep. 2019. Web. doi:10.11578/dc.20191001.2. Link

 
  • Du, Qiang, et al. “Digital Low-Level RF control system for Advanced Light Source Storage Ring.” arXiv preprint arXiv:1910.07175 (2019), Link

 
  • Du, Qiang, et al. “Deterministic stabilization of eight-way 2d diffractive beam combining using pattern recognition.” Optics letters 44.18 (2019): 4554-4557, Link

 
  • Gaioni, Luigi, et al. “RD53 analog front-end processors for the ATLAS and CMS experiments at the High-Luminosity LHC.” 28th International Workshop on Vertex Detectors (Vertex 2019). Sissa Medialab, 2019. Link

 
  • Gaioni, Luigi, and RD53 Collaboration. “Test results and prospects for RD53A, a large scale 65 nm CMOS chip for pixel readout at the HL-LHC.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 936 (2019): 282-285. Link

 
  • C. Grace, T. Stezelberger and P. Denes, “PETAL: A Multichannel Differential ADC Driver for High-Speed CMOS Image Sensors,” in IEEE Transactions on Nuclear Science, vol. 66, no. 6, pp. 955-959, (June 2019), doi: 10.1109/TNS.2019.2916972.

 
  • N. Hasan, B. Hou and A. D. Radadia, “Ion Sensing With Solution-Gated Graphene Field-Effect Sensors in the Frequency Domain,” in IEEE Sensors Journal, vol. 19, no. 19, pp. 8758-8766, 1 October 2019, doi: 10.1109/JSEN.2019.2921706.

 
  • Hovater, Curt, et al. Commissioning the JLab LERF Cryomodule Test Facility. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019, Link

 
  • Lacey, Ian, et al. “Transfer of autocollimator calibration for use with scanning gantry profilometers for accurate determination of surface slope and curvature of state-of-the-art x-ray mirrors.” Advances in Metrology for X-Ray and EUV Optics VIII. Vol. 11109. International Society for Optics and Photonics, (2 October 2019). https://doi.org/10.1117/12.2529519

 
  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • The NEXT collaboration., Henriques, C.A.O., Monteiro, C.M.B. et al. Electroluminescence TPCs at the thermal diffusion limit. J. High Energ. Phys. 2019, 27 (2019). https://doi.org/10.1007/JHEP01(2019)027

 
  • A. Papadopoulou, et al. “A 40mW/channel Image Sensor Line Driver IC with Independently Tunable Gain and Settling Time.” 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE. Link

 
  • C. Rivetta and L. Doolittle, “EMC issues in RF stations for particle accelerators,” 2019 International Symposium on Electromagnetic Compatibility – EMC EUROPE, 2019, pp. 784-789, doi: 10.1109/EMCEurope.2019.8871751. Link

 
  • C. Serrano, et al. “Hardware-in-the-Loop Testing of Accelerator Firmware.” (2019). Link

 
  • Shen, Tengming, Daniel Davis, and Marcos Turqueti. “Hazard Analysis and Operation Control of a Coupling-Loss Induced Quench System at the Magnet Test Facility at B58.” (July 2019). Link

 
  • Shen, Tengming, et al. “Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the wire current density of 1000 A/mm2.” Scientific reports 9.1 (July 2019): 1-9. Link

 
  • Sirunyan, Albert M., et al. “Measurements of the Higgs boson width and anomalous H V V couplings from on-shell and off-shell production in the four-lepton final state.” Physical Review D 99.11 (11 June 2019): 112003. Link

 
  • Sirunyan, Albert M., et al. “Performance of missing transverse momentum reconstruction in proton-proton collisions at√ s= 13 TeV using the CMS detector.” (2019). Link

 
  • Sirunyan, Albert M., et al. “Pseudorapidity distributions of charged hadrons in xenon-xenon collisions at sNN= 5.44 TeV.” Physics Letters B 799 (10 Dec 2019): 135049. Link

 
  • Sirunyan, Albert M., et al. “Search for long-lived particles using delayed photons in proton-proton collisions at s= 13 TeV.” Physical Review D 100.11 (9 Dec 2019): 112003. Link

 
  • Sirunyan, Albert M., et al. “Constraints on anomalous H V V couplings from the production of Higgs bosons decaying to τ lepton pairs.” Physical Review D 100.11 (4 Dec 2019): 112002. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019, Link

 

Magnetics Engineering Department

  • D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605, doi: 10.1109/TASC.2019.2898595. Link

 
  • L. Brouwer, et al., “User defined elements in ANSYS for 2D multiphysics modeling of superconducting magnets,” Superconductor Science and Technology, vol. 32, no. 9, p. 095011, Sep. 2019, doi: 10.1088/1361-6668/ab2e63. Link

 
  • M. Duda et al., “Power Test of the Second-Generation Compact Linear Collider (CLIC) Nb3Sn Damping Wiggler Short Model,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100405, doi: 10.1109/TASC.2019.2896774. Link

 
  • H. Felice et al., “F2D2: A Block-Coil Short-Model Dipole Toward FCC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 4001807, doi: 10.1109/TASC.2019.2897054.

 
  • L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002005, doi: 10.1109/TASC.2019.2896725.

 
  • M. Juchno et al., “Mechanical Utility Structure for Testing High Field Superconducting Dipole Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-4, Aug. 2019, Art no. 4001604, doi: 10.1109/TASC.2019.2896044.

 
  • M.Leitner, et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), (24 May 2019). Link

 
  • O. Malyshev, et al., “Vacuum Chamber at Cryogenic Temperatures.” Vacuum in Particle Accelerators: Modelling, Design and Operation of Beam Vacuum Systems (2019): 269-348. Link

 
  • G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906, doi: 10.1109/TASC.2019.2897326. Link

 
  • H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4100706, doi: 10.1109/TASC.2019.2901589.

 
  • F. Pierro et al., “Finite-Element Analysis of the Strain Distribution Due to Bending in a REBCO Coated Conductor for Canted Cosine Theta Dipole Magnet Applications,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4600705, doi: 10.1109/TASC.2019.2897708.

 
  • F. Pierro, M. Delgado, L. Chiesa, X. Wang and S. O. Prestemon, “Measurements of the Strain Dependence of Critical Current of Commercial REBCO Tapes at 15 T Between 4.2 and 40 K for High Field Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 8401305, doi: 10.1109/TASC.2019.2902458.

 
  • D. Schoerling et al., “The 16 T Dipole Development Program for FCC and HE-LHC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-9, Aug. 2019, Art no. 4003109, doi: 10.1109/TASC.2019.2900556.

 
  • C. Steier, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low-$\beta$ Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000605, doi: 10.1109/TASC.2019.2892126.

 
  • G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002805, doi: 10.1109/TASC.2019.2898327.

 
  • X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low-$\beta$ Nb$_3$Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706, doi: 10.1109/TASC.2019.2892119. Link

 
  • Wang, Xiaorong, Stephen A. Gourlay, and Soren O. Prestemon. “Dipole magnets above 20 tesla: Research needs for a path via high-temperature superconducting REBCO conductors.” Instruments 3.4 (2019): 62, Link

 
  • Wang, Xiaorong, et al. “A 1.2 T canted cosθ dipole magnet using high-temperature superconducting CORC® wires.” Superconductor Science and Technology 32.7 (2019): 075002, Link

 

Manufacturing Engineering & CAD Department

  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 
  • Leitner, M., et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019. Link

 
  • Neben, Derek, et al. “X-ray investigation on the Superconducting Source for Ions (SuSI).” Journal of Instrumentation 14.02 (19 Feb 2019): C02008. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • White, Ashley, et al. “A New Light for Berkeley Lab—the Advanced Light Source Upgrade.” Synchrotron Radiation News 32.1 (7 Feb 2019): 32-36. Link

 

Mechanical Engineering Department

  • A. Abada, et al. “HE-LHC: The high-energy large hadron collider.” The European Physical Journal Special Topics 228.5 (1 July 2019): 1109-1382. Link

 
  • A. Abada, et al. “FCC-hh: The hadron collider.” The European Physical Journal Special Topics 228.4 (1 July 2019): 755-1107. Link

 
  • A. Abada, et al. “FCC-ee: the lepton collider.” The European Physical Journal Special Topics 228.2 (1 June 2019): 261-623. Link

 
  • A. Abada, et al. “FCC physics opportunities.” The European Physical Journal C 79.6 (1 June 2019): 1-161. Link

 
  • Abbott, B. P., et al. “Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model.” Physical Review D 100.12 (4 Dec 2019): 122002. Link

 
  • Abbott, Benjamin P., et al. “Search for gravitational-wave signals associated with gamma-ray bursts during the second observing run of Advanced LIGO and Advanced Virgo.” The Astrophysical Journal 886.1 (21 Nov 2019): 75. Link

 
  • Abbott, B. P., et al. “Tests of general relativity with the binary black hole signals from the LIGO-Virgo catalog GWTC-1.” Physical Review D 100.10 (20 Nov 2019): 104036. Link

 
  • C. Anderson, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 2019. Link

 
  • D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605, doi: 10.1109/TASC.2019.2898595.

 
  • Barsotti, Lisa, et al. “Effects of transients in LIGO suspensions on searches for gravitational waves.” (2019). Link

 
  • S. Izquierdo,Bermudez, et al. “Mechanical analysis of the Nb3Sn 11 T dipole short models for the High Luminosity Large Hadron Collider.” Superconductor Science and Technology 32.8 (3 May 2019): 085012. Link

 
  • Y.D. Chuang, et al. “Momentum-resolved resonant inelastic soft X-ray scattering (qRIXS) endstation at the ALS.” Journal of Electron Spectroscopy and Related Phenomena (2019): 146897. Link

 
  • D. Corrigan, K. Sooknanan, J. Doyle, C. Lordan and A. Kokaram, “A Low-Complexity Mosaicing Algorithm for Stock Assessment of Seabed-Burrowing Species,” in IEEE Journal of Oceanic Engineering, vol. 44, no. 2, pp. 386-400, April 2019, doi: 10.1109/JOE.2018.2808973.

 
  • Duan, Yutong, et al. “Focal plate structure alignment of the Dark Energy Spectroscopic Instrument.” Journal of Astronomical Telescopes, Instruments, and Systems 5.1 (2019): 014003. https://doi.org/10.1117/1.JATIS.5.1.014003

 
  • Á. Fernández-Galiana et al., “A compact actively damped vibration isolation platform for optical experiments in ultra-high vacuum,” Jan. 2019, [Online]. Available: http://arxiv.org/abs/1901.09666

 
  • P. Ferracin et al., “Mechanical Analysis of the Collaring Process of the 11 T Dipole Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002705, doi: 10.1109/TASC.2019.2899284.

 
  • C. Fichera, A. Bertarelli, P. Ferracin, M. Guinchard, O. Sacristán de Frutos and G. Vallone, “New Methodology to Derive the Mechanical Behavior of Epoxy-Impregnated Nb3Sn Cables,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 7, pp. 1-12, Oct. 2019, Art no. 8401912, doi: 10.1109/TASC.2019.2905224.

 
  • L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002005, doi: 10.1109/TASC.2019.2896725.

 
  • Huschke, et al. Permanent Magnet Dipole-Quadrupole and Correcto-Tuner for Small Bore Accelerators. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019. Link

 
  • Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019, Link

 
  • Leitner, M., et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019, Link

 
  • Leitner, Daniela. “High Performance ECR Sources for Next-Generation Nuclear Science Facilities.” 10th International Particle Accelerator Conference, Melbourne, Australia, JACoW Publishing. 2019. Link

 
  • Lin, Fang-Ming, Eric Anderssen, and Raymond K. Yee. “Heat Transfer Interface to Graphitic Foam.” ASME International Mechanical Engineering Congress and Exposition. Vol. 59452. American Society of Mechanical Engineers, 2019, Link

 
  • G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906, doi: 10.1109/TASC.2019.2897326.

 
  • H. Pan, E. C. Anderssen, D. W. Cheng, S. O. Prestemon and G. Ambrosio, “Failure Assessments for MQXF Magnet Support Structure With a Graded Approach,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 8401507, doi: 10.1109/TASC.2019.2908113.

 
  • H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4100706, doi: 10.1109/TASC.2019.2901589.

 
  • I. Pong, L. D. Cooley, A. Lin, H. C. Higley and C. Sanabria, “Diameter Quality Control of Nb3Sn Wires for MQXF Cables in the USA,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 6001505, doi: 10.1109/TASC.2019.2909238.

 
  • D. Reitze et al., “The US Program in Ground-Based Gravitational Wave Science: Contribution from the LIGO Laboratory,” Mar. 2019. [Online]. Available: https://arxiv.org/abs/1903.04615

 
  • R. Soufli, et al. “Optical constants of magnetron sputtered Pt thin films with improved accuracy in the N-and O-electronic shell absorption regions.” Journal of Applied Physics 125.8 (2019): 085106. Link

 
  • Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 
  • G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002805, doi: 10.1109/TASC.2019.2898327.

 
  • G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low-$\beta$ Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000605, doi: 10.1109/TASC.2019.2892126.

 
  • S. Vitale, et al., “Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO.” (2019). Link

 
  • X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low-$\beta$ Nb$_3$Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706, doi: 10.1109/TASC.2019.2892119.

 
  • S. Yin, D. Arbelaez, J. Swanson and T. Shen, “Epoxy Resins for Vacuum Impregnating Superconducting Magnets: A Review and Tests of Key Properties,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 7800205, doi: 10.1109/TASC.2019.2898124.

 

Engineering Division 2017 Publications

by

This site will be updated on a regular basis.

Electronics, Software, and Instrumentation Engineering Department

  • Aartsen, Mark G., et al. “The IceCube Neutrino Observatory: instrumentation and online systems.” Journal of Instrumentation 12.03 (Mar. 2017): P03012. Link

 
  • Aartsen, Mark G., et al. “PINGU: a vision for neutrino and particle physics at the South Pole.” Journal of Physics G: Nuclear and Particle Physics 44.5 (Apr. 2017): 054006. Link

 
  • Abt, Iris, et al. “Fast neutron detector data analysis, MC simulation and preliminary result in the context of Minidex.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 
  • N. C. Andresen, et al. “A 5-μ m pitch charge-coupled device optimized for resonant inelastic soft X-ray scattering.” Review of Scientific Instruments 88.8 (2017): 083103. Link

 
  • V. Arsov, et al. “Design and Commissioning of the Bunch Arrival-Time Monitor for SwissFEL.” Proc. IBIC 2017 (2017). Link

 
  • Atharifard, A., et al. “Per-pixel energy calibration of photon counting detectors.” Journal of Instrumentation 12.03 (3 Mar. 2017): C03085. Link

 
  • Auger, M., A. Ereditato, and J. R. Sinclair. ArgonCube: A modular approach for liquid argon TPC neutrino detectors for near detector environments. No. CERN-SPSC-2017-025. 2017. Link

 
  • S. W. Barwick, et al. “Radio detection of air showers with the ARIANNA experiment on the Ross Ice Shelf.” Astroparticle Physics 90 (2017): 50-68. Link

 
  • C.J. Bebek, J.H. Emes, D.E. Groom, S. Haque, S.E. Holland, P.N. Jelinsky, A. Karcher, W.F. Kolbe, J.S. Lee, N.P. Palaio, D.J. Schlegel, G. Wang, R. Groulx, R. Frost, J. Estrada and M. Bonati, “Status of the CCD development for the Dark Energy Spectroscopic Instrument”, 2017 JINST 12 C04018 Link

 
  • S. Bheesette et al., “Medipix3RX neutron camera for ambient radiation measurements,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-5, doi: 10.1109/NSSMIC.2017.8533085.

 
  • Bucci, C., et al. “The Faraday room of the CUORE experiment.” Journal of Instrumentation 12.12 (17 Dec. 2017): P12013. Link

 
  • Carney, Rebecca, et al. “FE65-P2. A prototype pixel readout chip in 65 nm technology for HL-LHC upgrades.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 
  • Casas, LM Jara, et al. “Study of Total Ionizing Dose Effects in 65nm Digital Circuits with the DRAD Digital RADiation Test Chip.” 2017 17th European Conference on Radiation and Its Effects on Components and Systems (RADECS). IEEE, 2017. Link

 
  • Casas, LM Jara, et al. “Characterization of radiation effects in 65 nm digital circuits with the DRAD digital radiation test chip.” Journal of Instrumentation 12.02 (10 Feb 2017): C02039. Link

 
  • P. Chevtsov, et al. “Bunch arrival time monitor control setup for SwissFEL applications.” ICALEPCS, 2017. Link

 
  • CMS collaboration. “Search for single production of vector-like quarks decaying into ab quark and a W boson in proton-proton collisions at sqrt (s)= 13 TeV.” arXiv preprint arXiv:1701.08328 (2017). Link

 
  • Conti, Elia, et al. “Development of a large pixel chip demonstrator in RD53 for ATLAS and CMS upgrades.” PoS (2017): 005. Link

 
  • S., Copello, et al., “The commissioning of the CUORE experiment: the mini-tower run”, PoS, NEUTEL2017, 072, September 2017. Link

 
  • M. K. Covo et al., “88-Inch Cyclotron: The one-stop facility for electronics radiation testing,” 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2017, pp. 484-488, doi: 10.1109/MetroAeroSpace.2017.7999622.

 
  • Doolittle, Larry. “Tutorial on Analog Signal Processing and Design for Low Noise LLRF Front Ends.” LLRF2017 Workshop, Barcelona, Spain. 2017. Link

 
  • Doolittle, Larry, et al. “High Precision RF Control For SRF Cavities In LCLS-II.” SRF Workshop 2017. 2017. Link

 
  • L. Doolittle, et al. “High Precision RF Control For SRF Cavities In LCLS-II.” SRF Workshop 2017. 2017. Link

 
  • Gaioni, Luigi, et al. “Design of analog front-ends for the RD53 demonstrator chip.” PoS (Sept 2017): 036. Link

 
  • C. Grace, E. Fong, D. Gnani, T. Stezelberger, H. v. d. Lippe and P. Denes, “A Modular Architecture for the Semi-Automatic Design and Layout of Pipelined ADC Arrays,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 21. Oct. 2017, pp. 1-4, doi: 10.1109/NSSMIC.2017.8532924.

 
  • C. Grace, et al., “A Modular Architecture for the Semi-Automatic Design and Layout of Pipelined ADC Arrays,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-4, doi: 10.1109/NSSMIC.2017.8532924. Link

 
  • N. Hasan, et al., “Few-flakes reduced graphene oxide sensors for organic vapors with a high signal-to-noise ratio.” Nanomaterials 7.10 (2017): 339. Link

 
  • Q. Ji, et al. “Note: Coincidence measurements of 3He and neutrons from a compact DD neutron generator.” Review of Scientific Instruments 88.5 (2017): 056105. Link

 
  • I. J. Johnson et al., “Development of a fast framing detector for electron microscopy,” 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 10. Oct. 2016, pp. 1-2, doi: 10.1109/NSSMIC.2016.8069681.

 
  • Kneissl, Raphael, et al. “The Minidex experiment for the measurement of muon-induced neutrons.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 
  • Krieger, Amanda, et al. “A micropower readout ASIC for pixelated liquid Ar TPCs.” Topical Workshop on Electronics for Particle Physics. 2017. Link

 
  • Z. Y., Lin, et al. “The Preliminary Performance of the Timing and Synchronization System at Tsinghua University.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). May 2017. Link

 
  • Luo, Tianhuan, et al. “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 1 Jan. 2017. Link

 
  • Ma, Hengjie, et al. “An Internet Rack Monitor-Controller for APS LINAC RF Electronics Upgrade.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 2017. Link

 
  • V.,Novati, et al., “CUORE: first results and prospects,” PoS,NuFact2017, 164, 2017. Link

 
  • T. Prakash, A fully-synchronous multi-GHz analog waveform recording and triggering circuit. University of California, Irvine, 2017. Link

 
  • Renner, Joshua, et al. “Background rejection in NEXT using deep neural networks.” Journal of Instrumentation 12.01 (Jan. 2017): T01004. Link

 
  • Saito, Yoshifumi, et al. “High‐speed MCP anodes for high time resolution low‐energy charged particle spectrometers.” Journal of Geophysical Research: Space Physics 122.2 (2017): 1816-1830. Link

 
  • Serrano, C., L. Doolittle, and V. Vytla. “Cryomodule-on-chip simulation engine.” Proc. ICALEPCS. 2017. Link

 
  • Serrano, Carlos, et al. “Design and Implementation of the LLRF System for LCLS-II.” Proceedings of ICALEPCS2017, Barcelona, Spain (2017): 1969-1974. Link

 
  • C. Serrano, et al., “Cryomodule-on-chip simulation engine.” Proc. ICALEPCS. 2017. Link

 

 
  • C. Serrano, et al., “Design and Implementation of the LLRF System for LCLS-II.” Proceedings of ICALEPCS2017, Barcelona, Spain (2017): 1969-1974. Link

 
  • Shamshad, M., et al. “Semi-analytic off-axis x-ray source model.” Journal of Instrumentation 12.10 (23 Oct. 2017): P10013. Link

 
  • T. Stezelberger, M. Schütt, S. Zimmermann, M. Bantel, C. M. Campbell and M. Cromaz, “Modeling the energy and timing digital signal processing for the Gamma Ray Energy Tracking In-Beam Array (GRETINA),” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-6, doi: 10.1109/NSSMIC.2017.8532908.

 
  • T. Stezelberger, et al., “Modeling the energy and timing digital signal processing for the Gamma Ray Energy Tracking In-Beam Array (GRETINA),” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-6, doi: 10.1109/NSSMIC.2017.8532908. Link

 
  • Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 2017. Link

 
  • Wilcox, Russell, et al. “Interferometer design and controls for pulse stacking in high power fiber lasers.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 6 March 2017. Link

 
  • Y. Xu et al., “FPGA-Based Optical Cavity Phase Stabilization for Coherent Pulse Stacking,” in IEEE Journal of Quantum Electronics, vol. 54, no. 1, pp. 1-11, Feb. 2018, Art no. 1600111, doi: 10.1109/JQE.2017.2775698.

 
  • Xu, Yilun, et al. “FPGA Control of Coherent Pulse Stacking.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 2017. Link

 
  • Y. Yang et al., “A Pulse-Pattern-Based Phase-Locking Method for Multi-cavity Coherent Pulse Stacking,” in Conference on Lasers and Electro-Optics, OSA Technical Digest (online) (Optica Publishing Group, 2017), paper SM4I.3. Link

 
  • Yang, Y., et al. “Multicavity coherent pulse stacking using Herriott cells.” North American Particle Accelerator Conference (NAPAC). 2017. Link

 

 

Magnetics Engineering Department

  • L. Brouwer, D. Arbelaez, S. Caspi, M. Marchevsky and S. Prestemon, “Improved Modeling of Canted–Cosine–Theta Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4001006, doi: 10.1109/TASC.2017.2775565.

 
  • DeMello, Allan, et al. “Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 
  • E. F. Holik et al., “Fabrication of First 4-m Coils for the LARP MQXFA Quadrupole and Assembly in Mirror Structure,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4003605, doi: 10.1109/TASC.2017.2656155.

 
  • E. F. Holik et al.”Two-layer 16 Tesla cosθ dipole design based on MQXF low-β quadrupoles.” (2017). Link

 
  • Holik, Eddie Frank, et al. “Fabrication of first 4-m coils for the LARP MQXFA quadrupole and assembly in mirror structure.” IEEE Transactions on Applied Superconductivity 27.4 (23 Jan 2017): 1-5. Link

 
  • M. Juchno et al., “Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4602806, doi: 10.1109/TASC.2017.2773832.

 
  • Lauer, Kenneth, et al. “LCLS-II undulator motion control.” Proc. 16th Int. Conf. Accel. Large Experim. Phys. Control Syst.. Oct. 2017. Link

 
  • Leitner, Matthaeus, et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 1 May 2017, Link

 
  • Ray, K. L., et al. “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017, Link

 
  • Scharfstein, G. A., Diego Arbelaez, and J. Jung. “An Endstation with Cryogenic Coils Contributing to a 0.5 Tesla Field and 30-400k Sample Thermal Control.” 9th Edition of the Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference (MEDSI’16), Barcelona, Spain, 11-16 September 2016. JACOW Publishing, Geneva, Switzerland, 1 June 2017. Link

 
  • Stoynev, Stoyan, et al. “Summary of test results of MQXFS1—The first short model 150 mm aperture Nb3Sn quadrupole for the high-luminosity LHC upgrade.” IEEE Transactions on Applied Superconductivity 28.3 (12 Dec 2017): 1-5. Link

 
  • Vallone, Giorgio, et al. “Mechanical Design Analysis of MQXFB, the 7.2-m-Long Low-$\beta $ Quadrupole for the High-Luminosity LHC Upgrade.” IEEE Transactions on applied superconductivity 28.3 (4 Dec 2017): 1-5. Link

 
  • G. Vallone et al., “Mechanical Analysis of the Short Model Magnets for the Nb $_{3}$Sn Low-$\beta$ Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4003106, doi: 10.1109/TASC.2017.2785388.

 
  • Wallén, E., et al. “Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project.” (2017), Link

 
  • X. Wang, D. Arbelaez, S. Caspi, S. O. Prestemon, G. Sabbi and T. Shen, “Strain Distribution in REBCO-Coated Conductors Bent With the Constant-Perimeter Geometry,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 8, pp. 1-10, Dec. 2017, Art no. 6604010, doi: 10.1109/TASC.2017.2766132.

 

Manufacturing Engineering & CAD Department

  • Doyle, J. A., et al. “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 
  • Leitner, M., et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 2017. Link

 

Mechanical Engineering Department

  • B. P. Abbott et al., “First low-frequency Einstein@Home all-sky search for continuous gravitational waves in Advanced LIGO data,” Physical Review D, vol. 96, no. 12, p. 122004, Dec. 2017, doi: 10.1103/PhysRevD.96.122004.

 
  • B. P. Abbott et al., “GW170608: Observation of a 19 Solar-mass Binary Black Hole Coalescence,” The Astrophysical Journal, vol. 851, no. 2, p. L35, Dec. 2017, doi: 10.3847/2041-8213/aa9f0c.

 
  • B. P. Abbott et al., “First narrow-band search for continuous gravitational waves from known pulsars in advanced detector data,” Physical Review D, vol. 96, no. 12, p. 122006, Dec. 2017, doi: 10.1103/PhysRevD.96.122006.

 
  • Abbott, Benjamin P., et al. “Search for post-merger gravitational waves from the remnant of the binary neutron star merger GW170817.” The Astrophysical Journal Letters 851.1 (7 Dec 2017): L16. Link

 
  • Abbott, Benjamin P., et al. “On the progenitor of binary neutron star merger GW170817.” The Astrophysical Journal Letters 850.2 (1 Dec 2017): L40. Link

 
  • Abbott, Benjamin P., et al. “Estimating the contribution of dynamical ejecta in the kilonova associated with GW170817.” The Astrophysical Journal Letters 850.2 (1 Dec 2017): L39. Link

 
  • Abbott, Benjamin P., et al. “A gravitational-wave standard siren measurement of the Hubble constant.” arXiv preprint arXiv:1710.05835 (16 Oct. 2017). Link

 
  • Abbott, Benjamin P., et al. “Upper limits on gravitational waves from Scorpius X-1 from a model-based cross-correlation search in advanced LIGO data.” The Astrophysical Journal 847.1 (2017): 47. Link

 
  • Abbott, Benjamin P., et al. “GW170814: a three-detector observation of gravitational waves from a binary black hole coalescence.” Physical review letters 119.14 (6 Oct. 2017): 141101. Link

 
  • Abbott, Benjamin P., et al. “All-sky search for periodic gravitational waves in the O1 LIGO data.” Physical Review D 96.6 (2017): 062002. Link

 
  • Androic, D., et al. “Qweak: First Direct Measurement of the Proton’s Weak Charge.” EPJ Web of Conferences. Vol. 137. EDP Sciences, 22 March 2017. Link

 
  • Anerella, M., et al. MQXFS1 Quadrupole Fabrication Report. No. FERMILAB-TM-2660-TD. 16 Jul. 2017, Link

 
  • G. Chlachidze et al., “Performance of the First Short Model 150-mm-Aperture Nb3Sn Quadrupole MQXFS for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4000205, doi: 10.1109/TASC.2016.2629001.

 
  • Y. Chuang, et al. “Modular soft x-ray spectrometer for applications in energy sciences and quantum materials.” Review of Scientific Instruments 88.1 (2017): 013110. Link

 
  • M. K. Covo et al., “88-Inch Cyclotron: The one-stop facility for electronics radiation testing,” 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), June 2017, pp. 484-488, doi: 10.1109/MetroAeroSpace.2017.7999622.

 
  • DeMello, Allan, et al. “Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 
  • Doyle, J. A., et al. “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 
  • Etxeberria, Julen, and Jeong Han Lee. “EtherCAT based DAQ system at ESS.” (2017). Link

 
  • S. Farina, et al. “MicroTCA generic data acquisition systems at ESS.” Proc. of International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS’17), Barcelona, Spain. No. 16. October 2017. Link

 
  • García, J. Cereijo, et al. “Timing system at ESS.” Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’17). May 2017. Link

 
  • S. Izquierdo Bermudez et al., “Magnetic Analysis of the Nb3Sn Low-Beta Quadrupole for the High-Luminosity LHC,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4001905, doi: 10.1109/TASC.2017.2651358.

 
  • Lauer, Kenneth, et al. “LCLS-II undulator motion control.” Proc. 16th Int. Conf. Accel. Large Experim. Phys. Control Syst.. Oct. 2017. Link

 
  • Leitner, Matthaeus, et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 1, May 2017. Link

 
  • Matichard, Fabrice, et al. “Advanced LIGO two-stage twelve-axis vibration isolation and positioning platform. Part 1: Design and production overview.” Precision Engineering 40 (2015): 273-286. Link

 
  • H. Pan et al., “Mechanical Design Studies of the MQXF Long Model Quadrupole for the HiLumi LHC,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4004105, doi: 10.1109/TASC.2016.2642169.

 
  • R. Qiao et al. “High-efficiency in situ resonant inelastic x-ray scattering (iRIXS) endstation at the Advanced Light Source.” Review of Scientific Instruments 88.3 (2017): 033106. Link

 
  • Ray, K. L., et al. “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 
  • D. B. Ríos, et al. “New Measurements of the Beam Normal Spin Asymmetries at Large Backward Angles with Hydrogen and Deuterium Targets.” Physical Review Letters 119.1 (July 2017): 012501. Link

 
  • Ruminski, Anne M., et al. “Geometric analysis of enhanced thermal conductivity in epoxy composites: A comparison of graphite and carbon nanofiber fillers.” physica status solidi (a) 214.1 (2017): 1600368. Link

 
  • Sacristan De Frutos, Oscar, et al. JACoW: Characterisation of the Mechanical Behaviour of Superconducting Cables Used in High Field Magnets From Room Temperature Down to 77K. (May 2017), No. CERN-ACC-2017-242. 2017. Link

 
  • Steier, Christoph, et al. R+ D progress towards a diffraction limited upgrade of the ALS. No. LBNL-1007077. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2017. Link

 
  • S. Stoynev et al., “Summary of Test Results of MQXFS1—The First Short Model 150 mm Aperture Nb3Sn Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, 12 Dec 2017, Art no. 4001705, doi: 10.1109/TASC.2017.2782664.

 
  • Takakuwa, Jeffrey, et al. “Fabrication, Assembly, And Metrology Methods To Opti-Mize An Adjustable Exit Slit For A Soft X-Ray Beamline.” 9th Edition of the Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference (MEDSI’16), Barcelona, Spain, 11-16 September 2016. JACOW Publishing, Geneva, Switzerland, 2017. Link

 
  • Thomas, Cyrille, et al. “Design and implementation of non-invasive profile monitors for the ESS LEBT.” Proc. IBIC 16 (1 February 2017): 551-554. Link

 
  • Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 2017. Link

 
  • G. Vallone et al., “Mechanical Design Analysis of MQXFB, the 7.2-m-Long Low- $\beta$ Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, April 2017, Art no. 4003705, doi: 10.1109/TASC.2017.2778064.

 
  • G. Vallone and P. Ferracin, “Modeling Coil-Pole Debonding in ${\rm Nb_{3}Sn}$ Superconducting Magnets for Particle Accelerators,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 8, pp. 1-11, Dec. 2017, Art no. 4004611, doi: 10.1109/TASC.2017.2759249.

 
  • Vallone, Giorgio, et al. “Mechanical performance of short models for MQXF, the Nb3Sn low-β quadrupole for the Hi-Lumi LHC.” IEEE Transactions on applied superconductivity 27.4 (June 2017): 1-6. Link

 
  • Walker, Mia, et al. “Effects of transients in LIGO suspensions on searches for gravitational waves.” Review of Scientific Instruments 88.12 (2017): 124501. Link

 
  • Wallén, E., et al. “Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project.” (2017). Link

 
  • Wen, Linqing, LIGO Scientific Collaboration, and Virgo Collaboration. “VizieR Online Data Catalog: Gravitational waves search from known PSR with LIGO (Abbott+, 2017).” (1 Nov 2017). Link