Berkeley Lab
Bringing Science Solutions to the World

Search Results for: RF

Mechanical Design & Analysis of RF Structures

 

The Berkeley Lab has developed methodology and expertise in the analysis, design and fabrication of RF cavities for a variety of applications.  Numerous normal conducting copper cavities have been developed for use as accelerating structures for particle accelerator beamlines. We have extensive experience designing, building and operating both pillbox type cavities and radio-frequency quadrupoles (RFQ’s) that operate over a wide range of resonant frequencies.  The primary software tools used for the design and analysis of the cavities are CST Microwave Studio and ANSYS.  Fabrication of the cavities are carried out in our shops with specialized procedures such as hydrogen brazing, e-beam welding and cooling passage gun-drilling being provided by selected local vendors.

Low-Level Radio Frequency (LLRF) Control

 

We utilize Low-level Radio Frequency (LLRF) to control accelerator beamlines and are pioneers of implementing fully digital LLRF/RF controls. The high power sources that drive electromagnetic fields inside accelerating cavities must be precisely controlled against noise perturbation for optimal beam quality. To do this, the LLRF controller measures the magnitude and phase of a sample of the cavity field, and feeds back to the high power RF amplifier in hard real time. Typical feedback loop response times are 0.5 to 2.0 microseconds.

Achieving <0.02° of stability at 2856 MHz, we have applied this technology to the timing distribution system in the latest FEL (free electron laser) facilities, synchronizing remote lasers and RF references with combined jitter and long-term drift as low as 20 femtoseconds rms. Using Innovative techniques to reduce crosstalk and close-in phase noise, we have achieved short-term SRF cavity stability better than 0.01°. With well-designed digital (FPGA) programming, we have also demonstrated automated cavity turn-on and robust cavity operation in the presence of microphonics.

High Power RF Engineering

 

High Power Radio Frequency (RF) Engineering is a specialized field of electrical engineering that deals with components and systems that operate at well above the audio frequencies band. Historically, RF Engineering began over 100 years ago with the advent of wireless telegraphy known today as radio. High Power RF Engineering has grown enormously and is now used in all forms of communication systems utilizing transmitters, receivers and antennas, in industrial processing such heating, curing and sterilization, in many forms of imaging such as medical, geological and materials as well as in computer engineering due to their ever increasing computing speeds. At the Berkeley Lab, we primarily use High Power RF Engineering to detect and measure the presence and position of atomic particles, to design mechanical structures to facilitate the transport of atomic particles, to design accelerating structures with large electric fields used to accelerate particles, and to design and operate kilo-watt to multi-mega-watt RF amplifiers used to provide power to these accelerating structures. 

Engineering Division 2024 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

Aad, Georges, et al. “Search for the Zγ decay mode of new high-mass resonances in pp collisions at s√= 13 TeV with the ATLAS detector.” Physics Letters B 848 (2024): 138394. Link

 

Aad, Georges, et al. “Differential cross-section measurements of the production of four charged leptons in association with two jets using the ATLAS detector.” Journal of High Energy Physics 2024.1 (2024): 1-51. Link

 

Aad, Georges, et al. “Observation of Wγγ triboson production in proton-proton collisions at s√= 13 TeV with the ATLAS detector.” Physics Letters B 848 (2024): 138400. Link

 

Aad, Georges, et al. “Measurement of the total and differential cross-sections of tt¯W production in pp collisions at s√=13 TeV with the ATLAS detector.” (2024). Link

 

Aad, Georges, et al. “Search for electroweak production of supersymmetric particles in final states with two τ-leptons in s√ = 13 TeV pp collisions with the ATLAS detector.” (2024). Link

 

Abud, A. Abed, et al. “Performance of a modular ton-scale pixel-readout liquid argon Time Projection Chamber.” arXiv preprint arXiv:2403.03212 (2024). Link

 

Abud, A. Abed, et al. “Doping liquid argon with xenon in ProtoDUNE Single-Phase: effects on scintillation light.” arXiv preprint arXiv:2402.01568 (2024). Link

 

Abud, Adam Abed, et al. “The DUNE Far Detector Vertical Drift Technology, Technical Design Report.” (2024). Link

 

Adame, A. G., et al. “Validation of the Scientific Program for the Dark Energy Spectroscopic Instrument.” The Astronomical Journal 167.2 (2024): 62. Link

 

Covo, M. Kireeff, et al. “Single radio frequency bucket injection in the 88-Inch Cyclotron using a pulsed high voltage chopper.” Review of Scientific Instruments 95.1 (2024). Link

 

Higa, Kenneth, et al. “Visualization of Porous Composite Battery Electrode Fabrication Dynamics for Different Formulations and Conditions Using Hard X-ray Microradiography.” ACS Applied Energy Materials (2024). Link

 

Papadopoulou, Aikaterini, et al. “A Modular 512-Channel Neural Signal Acquisition ASIC for High Density 4096 Channel Electrophysiology.” Authorea Preprints (2024). Link

 

Turqueti, Marcos, et al. “Digital Miniature Cathode Ray Magnetometer.” (2024). Link

 

Zhou, Tong, et al. “Ultra-broadband coherent pulse stacking of Yb fiber amplified ultrashort pulses.” Fiber Lasers XXI: Technology and Systems. SPIE, 2024. Link

 

Magnetics Engineering Department

Castaneda, Nathaly, et al. “A 6-around-1 cable using high-temperature superconducting STAR® wires for magnet applications.” Superconductor Science and Technology (2024). Link

 

Fernández, JL Rudeiros, et al. “Interface Characterization for Superconducting Magnets.” IEEE Transactions on Applied Superconductivity (2024). Link

 

Kowitt, Nolan, et al. “Wire-array metamaterial studies in support of the axion plasma haloscope.” Bulletin of the American Physical Society (2024). Link

 

Marchevsky, Maxim, and Soren Prestemon. “Thermal runaway criterion as a basis for the protection of high-temperature superconductor magnets.” Superconductor Science and Technology (2024). Link

 

Shen, Tengming, et al. “Design and Development of a 28 GHz Nb3 Sn ECR Ion Source Superconducting Magnet.” IEEE Transactions on Applied Superconductivity (2024). Link

 

Vallone, G., et al. “Simulation of Thermo-Mechanical Stresses After a Quench in the 15 T Test Facility Dipole Magnet.” IEEE Transactions on Applied Superconductivity (2024). Link

 

S. Viarengo, F. Freschi and L. Savoldi, “CORC® Cables: Numerical Characterization of the Critical Current After Bending,” in IEEE Transactions on Applied Superconductivity, doi: 10.1109/TASC.2023.3348090. Link

 

Y. Zhai, D. Larbalestier, R. Duckworth, Z. Hartwig, S. Prestemon and C. Forest, “R&D Needs for a US Fusion Magnet Base Program,” in IEEE Transactions on Applied Superconductivity, doi: 10.1109/TASC.2023.3349368. Link

 

Manufacturing Engineering and CAD Department

Abud, Adam Abed, et al. “The DUNE Far Detector Vertical Drift Technology, Technical Design Report.” (2024). Link

 

Abud, A. Abed, et al. “Performance of a modular ton-scale pixel-readout liquid argon Time Projection Chamber.” arXiv preprint arXiv:2403.03212 (2024). Link

 

Abud, A. Abed, et al. “Doping liquid argon with xenon in ProtoDUNE Single-Phase: effects on scintillation light.” arXiv preprint arXiv:2402.01568 (2024). Link

 

Callow, Joseph, et al. “The rate of extreme coronal line emitting galaxies in the Sloan Digital Sky Survey and their relation to tidal disruption events.” arXiv preprint arXiv:2402.16951 (2024). Link

 

Clark, Peter, et al. “Long-term follow-up observations of extreme coronal line emitting galaxies.” Monthly Notices of the Royal Astronomical Society (2024): stae460. Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: A Concise Model for the Galactic Conformity of Emission-line Galaxies.” The Astrophysical Journal 961.1 (2024): 74. Link

 

Guo, Wei-Jian, et al. “Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. I. Sample from the Early Data.” The Astrophysical Journal Supplement Series 270.2 (2024): 26. Link

 

Hahn, ChangHoon, et al. “PROVABGS: The Probabilistic Stellar Mass Function of the BGS One-percent Survey.” The Astrophysical Journal 963.1 (2024): 56. Link

 

Krolewski, Alex, et al. “Constraining primordial non-Gaussianity from DESI quasar targets and Planck CMB lensing.” Journal of Cosmology and Astroparticle Physics 2024.03 (2024): 021. Link

 

Lamman, Claire, et al. “Redshift-dependent RSD bias from intrinsic alignment with DESI Year 1 spectra.” Monthly Notices of the Royal Astronomical Society 528.4 (2024): 6559-6567. Link

 

Pearl, Alan N., et al. “The DESI One-percent Survey: Evidence for Assembly Bias from Low-redshift Counts-in-cylinders Measurements.” The Astrophysical Journal 963.2 (2024): 116. Link

 

Trusov, Svyatoslav, et al. “The two-point correlation function covariance with fewer mocks.” Monthly Notices of the Royal Astronomical Society 527.3 (2024): 9048-9060. Link

 

Variu, Andrei, et al. “DESI Mock Challenge: Constructing DESI galaxy catalogues based on FastPM simulations.” Monthly Notices of the Royal Astronomical Society 527.4 (2024): 11539-11558. Link

 

Yu, Jiaxi, et al. “The DESI One-Percent Survey: exploring a generalized SHAM for multiple tracers with the UNIT simulation.” Monthly Notices of the Royal Astronomical Society 527.3 (2024): 6950-6969. Link

 

Mechanical Engineering Department

Abbott, R., et al. “GWTC-2.1: Deep extended catalog of compact binary coalescences observed by LIGO and Virgo during the first half of the third observing run.” Physical Review D 109.2 (2024): 022001. Link

 

Abed Abud, Adam. Performance of a modular ton-scale pixel-readout liquid argon time projection chamber. No. FERMILAB-PUB-24-0073-LBNF; arXiv: 2403.03212. Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); SLAC National Accelerator Laboratory (SLAC), Menlo Park, CA (United States); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Brookhaven National Laboratory (BNL), Upton, NY (United States); Argonne National Laboratory (ANL), Argonne, IL (United States); Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Pacific Northwest National Laboratory (PNNL), Richland, WA (United States), 2024. Link
Abud, A. Abed, et al. “Doping liquid argon with xenon in ProtoDUNE Single-Phase: effects on scintillation light.” arXiv preprint arXiv:2402.01568 (2024). Link

 

Abud, Adam Abed, et al. “The DUNE Far Detector Vertical Drift Technology, Technical Design Report.” (2024). Link

 

Adame, A. G., et al. “Validation of the scientific program for the Dark Energy Spectroscopic Instrument.” The Astronomical Journal 167.2 (2024): 62. Link

 

Bault, Abby, et al. “Impact of Systematic Redshift Errors on the Cross-correlation of the Lyman-alpha Forest with Quasars at Small Scales Using DESI Early Data.” arXiv preprint arXiv:2402.18009 (2024). Link

 

Bocquet, S., et al. “SPT Clusters with DES and HST Weak Lensing. II. Cosmological Constraints from the Abundance of Massive Halos.” arXiv preprint arXiv:2401.02075 (2024). Link

 

Callow, Joseph, et al. “The rate of extreme coronal line emitting galaxies in the Sloan Digital Sky Survey and their relation to tidal disruption events.” arXiv preprint arXiv:2402.16951 (2024). Link

 

Callow, Joseph, et al. “The rate of extreme coronal line emitting galaxies in the Sloan Digital Sky Survey and their relation to tidal disruption events.” arXiv preprint arXiv:2402.16951 (2024). Link

 

Chen, Shi-Fan, et al. “Baryon Acoustic Oscillation Theory and Modelling Systematics for the DESI 2024 results.” arXiv preprint arXiv:2402.14070 (2024). Link

 

Clark, Peter, et al. “Long-term follow-up observations of extreme coronal line emitting galaxies.” Monthly Notices of the Royal Astronomical Society (2024): stae460. Link

 

Fernández, JL Rudeiros, et al. “Interface Characterization for Superconducting Magnets.” IEEE Transactions on Applied Superconductivity (2024). Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: A Concise Model for the Galactic Conformity of Emission-line Galaxies.” The Astrophysical Journal 961.1 (2024): 74. Link

 

Guo, Wei-Jian, et al. “Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. I. Sample from the Early Data.” The Astrophysical Journal Supplement Series 270.2 (2024): 26. Link

 

Higa, Kenneth, et al. “Visualization of Porous Composite Battery Electrode Fabrication Dynamics for Different Formulations and Conditions Using Hard X-ray Microradiography.” ACS Applied Energy Materials (2024). Link

 

Lamman, Claire, et al. “Redshift-dependent RSD bias from intrinsic alignment with DESI Year 1 spectra.” Monthly Notices of the Royal Astronomical Society 528.4 (2024): 6559-6567. Link

 

Manser, Christopher J., et al. “The DESI Early Data Release White Dwarf Catalogue.” arXiv preprint arXiv:2402.18641 (2024). Link

 

Schlafly, E. F., et al. “Measuring Fiber Positioning Accuracy and Throughput with Fiber Dithering for the Dark Energy Spectroscopic Instrument.” arXiv preprint arXiv:2403.05688 (2024). Link

 

Shen, Tengming, et al. “Design and Development of a 28 GHz Nb3Sn ECR Ion Source Superconducting Magnet.” IEEE Transactions on Applied Superconductivity (2024). Link

 

Vallone, G., et al. “Simulation of Thermo-Mechanical Stresses After a Quench in the 15 T Test Facility Dipole Magnet.” IEEE Transactions on Applied Superconductivity (2024). Link

 

Variu, Andrei, et al. “DESI Mock Challenge: Constructing DESI galaxy catalogues based on FastPM simulations.” Monthly Notices of the Royal Astronomical Society 527.4 (2024): 11539-11558. Link

 

Yuan, Sihan, et al. “Redshift evolution and covariances for joint lensing and clustering studies with DESI Y1.” arXiv preprint arXiv:2403.00915 (2024). Link

 

Engineering Division 2023 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

 

Aad, Georges, et al. arXiv: Fast b-tagging at the high-level trigger of the ATLAS experiment in LHC Run 3. No. CERN-EP-2023-111. 2023. Link

 

Aad, Georges, et al. Search for the Zgamma decay mode of new high-mass resonances in pp collisions at {s}= 13 TeV with the ATLAS detector. No. arXiv: 2309.04364. ATLAS-HIGG-2018-44-003, 2023. Link

 

Aad, Georges, et al. arXiv: Measurement of the cross-sections of the electroweak and total production of a Z gamma pair in association with two jets in pp collisions at {s}= 13 TeV with the ATLAS detector. No. CERN-EP-2023-098. 2023. Link

 

Aad, Georges, et al. arXiv: Search for non-resonant production of semi-visible jets using Run~ 2 data in ATLAS. No. arXiv: 2305.18037. 2023. Link

 

Aad, Georges, et al. arXiv: Evidence of off-shell Higgs boson production from ZZ leptonic decay channels and constraints on its total width with the ATLAS detector. No. CERN-EP-2023-03. 2023. Link

 

Aad, Georges, et al. arXiv: A precise determination of the strong-coupling constant from the recoil of $ Z $ bosons with the ATLAS experiment at $\sqrt {s}= 8$ TeV. No. arXiv: 2309.12986. 2023. Link

 

Abud, A. Abed, et al. “Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment.” arXiv preprint arXiv:2303.17007 (2023). Link

 

Abed Abud, A., et al. “Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora.” EUROPEAN PHYSICAL JOURNAL. C, PARTICLES AND FIELDS 83.7 (2023): 1-25. Link

 

Abud, A. Abed, et al. “The DUNE Far Detector Vertical Drift Technology, Technical Design Report.” arXiv preprint arXiv:2312.03130 (2023). Link

 

Abud, A. Abed, et al. “Highly-parallelized simulation of a pixelated LArTPC on a GPU.” Journal of Instrumentation 18.04 (2023): P04034. Link

 

Anderson, Michael G., and Drew A. Thomas. “Best Practices for Non-Nationally Recognized Testing Laboratory Utilization Equipment Inspection Processes.” 2023 IEEE IAS Electrical Safety Workshop (ESW). IEEE, 2023. Link

 

Anderson, T., et al. “Eos: conceptual design for a demonstrator of hybrid optical detector technology.” Journal of Instrumentation 18.02 (2023): P02009. Link

 

ATLAS collaboration. “Searches for the Z gamma decay mode of the Higgs boson and for new high-mass resonances in pp collisions at {s}= 13 TeV with the ATLAS detector.” arXiv preprint arXiv:1708.00212 (2017). Link

 

Bheesette, Srinidhi, and Marcos Turqueti. “Simulation Studies for an Electron Gun Based Magnetic Probe.” IEEE Transactions on Nuclear Science (2023). Link

 

Boxer, B., et al. “Studies in pulse shape discrimination for an optimized ASIC design.” Journal of Instrumentation 18.01 (2023): P01020. Link

 

Chen, Siyun, et al. “55-fs pulses from a spectrally combined fiber laser system via coherent spectral synthesis of two pulse shapers.” Fiber Lasers XX: Technology and Systems. Vol. 12400. SPIE, 2023. Link

 

Rainville, Alexander, et al. “Stable and Efficient Coherent Pulse Stacking Amplification of 81 Pulses with Four Channel Coherent Spatial Combining at 7mJ/Fiber.” CLEO: Science and Innovations. Optica Publishing Group, 2023. Link

 

Chen, Siyun, et al. “Ultra-broadband spectral combining of three pulse-shaped fiber amplifiers with 42fs compressed pulses.” CLEO: Science and Innovations. Optica Publishing Group, 2023. Link

 

Chen, Siyun, et al. “Broadband spectral combining of three pulse-shaped fiber amplifiers with 42fs compressed pulse duration.” Optics Express 31.8 (2023): 12717-12724. Link

 

Coffey, Aidan H., et al. “In situ spin coater for multimodal grazing incidence x-ray scattering studies.” Review of Scientific Instruments 94.9 (2023). Link

 

Coffey, Aidan H., et al. “In situ spin coater for multimodal grazing incidence x-ray scattering studies.” Review of Scientific Instruments 94.9 (2023). Link

 

Cooper, Lauren, et al. “Coherent Temporal Stacking of Tens-of-fs Laser Pulses.” CLEO: Science and Innovations. Optica Publishing Group, 2023. Link

 

Cropp, Frederick, et al. “Virtual-Diagnostic-Based Time Stamping for Ultrafast Electron Diffraction.” arXiv preprint arXiv:2302.04916 (2023). Link

 

Dawson, Kyle, et al. “Radiation Tolerance of High-Resistivity LBNL CCDs.” 2006 IEEE Nuclear Science Symposium Conference Record. Vol. 1. IEEE, 2006. Link

 

Doolittle, L., et al. “Drift Observations and Mitigation in LCLS-II RF.” arXiv preprint arXiv:2310.16392 (2023). Link

 

Du, Qiang, et al. “The Integration of Neural Network and High Throughput Multi-Scale Simulation for Establishing a Digital Twin for Aluminium Billet DC-Casting.” MATERIALS TRANSACTIONS 64.2 (2023): 360-365. Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: A concise model for galactic conformity of ELGs.” arXiv preprint arXiv:2309.03802 (2023). Link

 

Greenberg, Jacob K., et al. “Current and future applications of mobile health technology for evaluating spine surgery patients: a review.” Journal of Neurosurgery: Spine 1.aop (2023): 1-10. Link

 

Javeed, Saad, et al. “Association of upper-limb neurological recovery with functional outcomes in high cervical spinal cord injury.” Journal of Neurosurgery: Spine 1.aop (2023): 1-8. Link

 

Ji, Qing, et al. “Initial testing of a compact portable microwave-driven neutron generator.” IEEE Transactions on Nuclear Science 56.3 (2009): 1312-1315. Link

 

Jones, Michael S. “SPECIAL OPERATIONS IN MEDICAL RESEARCH.” Link

 

Kiani, Leily, et al. “High average power ultrafast laser technologies for driving future advanced accelerators.” Journal of Instrumentation 18.08 (2023): T08006. Link

 

Leemans, Wim P., et al. “L’OASIS Ti: sapphire laser facility: a multi-beam, multi-terawatt system for wake-field acceleration studies.” International Quantum Electronics Conference. Optica Publishing Group, 2004. Link

 

Murthy, Shreeharshini Dharanesh, et al. “Dual frequency master oscillator generation and distribution for ALS and ALS-U.” arXiv preprint arXiv:2310.15509 (2023). Link

 

Papadopoulou, Aikaterini, et al. “A Modular 512 Channel Neural Signal Acquisition ASIC for High Density 4096 Channel Electrophysiology.” Authorea Preprints (2023). Link

 

S. I. Parker et al., “3DX: an X-ray pixel array detector with active edges,” in IEEE Transactions on Nuclear Science, vol. 53, no. 3, pp. 1676-1688, June 2006. Link

 

Rainville, Alexander, et al. “Stable and Efficient Coherent Pulse Stacking Amplification of 81 Pulses with Four Channel Coherent Spatial Combining at 7mJ/Fiber.” CLEO: Science and Innovations. Optica Publishing Group, 2023. Link

 

Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing, 2017. Link

 

Turqueti, Marcos, et al. “Digital Miniature Cathode Ray Magnetometer.” (2024). Link

 

Vallone, G., et al. “Measurement and Computation of Nb 3 Sn Rutherford Cables Strength Under Multi-Axial Loading Conditions.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Vallone, G., et al. “Modelling Training in Nb 3 Sn Superconducting Magnets.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Janda, M., et al. “Experimental Measurement and Analysis of Insert Debonding in Carbon Fiber Structures for Particle Detectors.” (2023). Link

 

Vallone, G., et al. “A novel design for improving the control on the stainless-steel vessel welding process for superconducting magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Vallone, G., et al. “A Review of the Mechanical Properties of Materials Used in Nb 3 Sn Magnets for Particle Accelerators.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Vallone, G., et al. “Computation of the Strain Induced Critical Current Reduction in the 16 T Nb 3 Sn Test Facility Dipole.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Vytla, Vamsi K., and Larry Doolittle. “Newad: A register map automation tool for Verilog.” arXiv preprint arXiv:2305.09657 (2023). Link

 

Wang, Yirong, et al. “Measuring the conditional luminosity and stellar mass functions of galaxies by combining the DESI LS DR9, SV3 and Y1 data.” arXiv preprint arXiv:2312.17459 (2023). Link

 

Yashchuk, Valeriy V., et al. “Towards new generation long trace profiler LTP-2020: system design with different sensors in different operation modes.” Advances in Metrology for X-Ray and EUV Optics X. Vol. 12695. SPIE, 2023. Link

 

Zhang, Justin K., et al. “Feasibility of postoperative diffusion-weighted imaging to assess representations of spinal cord microstructure in cervical spondylotic myelopathy.” Neurosurgical Focus 55.3 (2023): E7. Link

 

Magnetics Engineering Department

 

Ambrosio, Giorgio, et al. “Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 
Ambrosio, G., et al. Enigineering Specification MQXFA Magnet Interface Specification. No. FERMILAB-TM-2801-TD. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Brookhaven National Lab.(BNL), Upton, NY (United States); Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2023. Link
 
Ambrosio, G., et al. Analysis of the MQXFA Low Beta Quadrupoles for HL-LHC after 50% magnet assembly complete+. No. FERMILAB-POSTER-23-288-TD. Brookhaven National Laboratory (BNL), Upton, NY (United States); Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States), 2023. Link
 

Arbelaez, D., et al. Current Status of the High Field Cable Test Facility at Fermilab. No. FERMILAB-POSTER-23-323-TD. Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States), 2023. Link

 

V. Calvelli et al., “R2D2, the CEA Graded Nb3Sn Research Racetrack Dipole Demonstrator Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-6, Aug. 2021, Art no. 4002706. Link

 

Cheng, D. W., et al. “The challenges and solutions of meeting the assembly specifications for the 4.5 m long MQXFA magnets for the Hi-Luminosity LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Li, Cheng, et al. “Extraordinary preservation of gene collinearity over three hundred million years revealed in homosporous lycophytes.” bioRxiv (2023): 2023-07. Link

 

Cheng, D. W., et al. “The challenges and solutions of meeting the assembly specifications for the 4.5 m long MQXFA magnets for the Hi-Luminosity LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fajardo, L. Garcia, et al. “Electromechanical analysis for the integration of a Nb 3 Sn and a Bi-2212 CCT dipole magnet for a hybrid magnet test.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fajardo, L. Garcia, et al. “Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Garcia Fajardo, L., et al. arXiv: Analysis of the mechanical performance of the 4.2 m long MQXFA magnets for the Hi-Lumi LHC Upgrade. No. arXiv: 2303.16795. 2023. Link

 

Fajardo, L. Garcia, et al. “Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Fajardo, L. Garcia, et al. “Electromechanical analysis for the integration of a Nb 3 Sn and a Bi-2212 CCT dipole magnet for a hybrid magnet test.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fernández, José Luis Rudeiros, and Paolo Ferracin. “Uni-layer magnets: a new concept for LTS and HTS based superconducting magnets.” Superconductor Science and Technology 36.5 (2023): 055003. Link

 

Ferracin, Paolo, et al. “Conceptual design of 20 T hybrid accelerator dipole magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-7. Link

 

Ferracin, Paolo, et al. “MQXFA series magnet production specification.” arXiv preprint arXiv:2302.01291 (2023). Link

 

Ferracin, Paolo, et al. “Conceptual design of 20 T hybrid accelerator dipole magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-7. Link

 

Marchevsky, M., et al. “Radio Frequency-Based Diagnostics for Superconducting Magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-6. Link

 

Ray, Katherine L., et al. “Applied Metrology for the Assembly of the Nb 3 Sn MQXFA Quadrupole Magnets for the HL-LHC AUP.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-6. Link

 

Stoynev, S., et al. “Effect of CLIQ on training of HL-LHC quadrupole magnets.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Todesco, E., et al. “Status and challenges of the interaction region magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Troitino, J. Ferradas, et al. “Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets.” Superconductor Science and Technology 36.6 (2023): 065002. Link

 

Vallone, G., et al. “Computation of the Strain Induced Critical Current Reduction in the 16 T Nb 3 Sn Test Facility Dipole.” IEEE T Link

 

Vallone, G., et al. “Computation of the Strain Induced Critical Current Reduction in the 16 T Nb 3 Sn Test Facility Dipole.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Vallone, G., et al. “Modelling Training in Nb 3 Sn Superconducting Magnets.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Velev, G. V., et al. “Status of the High Field Cable Test Facility at Fermilab.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-6. Link

 

Wang, X., et al. “An initial look at the magnetic design of a 150 mm aperture high-temperature superconducting magnet with a dipole field of 8 to 10 T.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Manufacturing Engineering and CAD Department

 

Abud, A. Abed, et al. “Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment.” arXiv preprint arXiv:2303.17007 (2023). Link

 

Ambrosio, Giorgio, et al. “Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Clark, Peter, et al. “Long-term follow-up observations of extreme coronal line emitting galaxies.” arXiv preprint arXiv:2307.03182 (2023). Link

 

Cooper, Andrew P., et al. “Overview of the DESI Milky Way Survey.” The Astrophysical Journal 947.1 (2023): 37. Link

 

Croteau, Jean-Francois, et al. “Microstructure Characterization of Nb 3 Sn Wires With Nanoprecipitate Artificial Pinning Centers Using Synchrotron High-Energy X-Rays.” IEEE Transactions on Applied Superconductivity (2023). Link

 

García, Luz Ángela, et al. “Analysis of the impact of broad absorption lines on quasar redshift measurements with synthetic observations.” arXiv preprint arXiv:2304.05855 (2023). Link

 

Ferracin, Paolo, et al. “MQXFA series magnet production specification.” arXiv preprint arXiv:2302.01291 (2023). Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: A concise model for galactic conformity of ELGs.” arXiv preprint arXiv:2309.03802 (2023). Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: Constructing Galaxy–Halo Connections for ELGs and LRGs Using Auto and Cross Correlations.” The Astrophysical Journal 954.2 (2023): 207. Link

 

Guo, Wei-Jian, et al. “Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. I. Sample from the Early Data.” arXiv preprint arXiv:2307.08289 (2023). Link

 

Hadzhiyska, Boryana, et al. “Synthetic light cone catalogues of modern redshift and weak lensing surveys with AbacusSummit.” arXiv preprint arXiv:2305.11935 (2023). Link

 

Hadzhiyska, Boryana, et al. “Planting a Lyman alpha forest on AbacusSummit.” arXiv preprint arXiv:2305.08899 (2023). Link

 

Hadzhiyska, Boryana, et al. “Mitigating the noise of DESI mocks using analytic control variates.” arXiv preprint arXiv:2308.12343 (2023). Link

 

Hahn, ChangHoon, et al. “PROVABGS: The Probabilistic Stellar Mass Function of the BGS One-Percent Survey.” arXiv preprint arXiv:2306.06318 (2023). Link

 

Krolewski, Alex, et al. “Constraining primordial non-Gaussianity from DESI quasar targets and Planck CMB lensing.” arXiv preprint arXiv:2305.07650 (2023). Link

 

Lamman, Claire, et al. “Intrinsic alignment as an RSD contaminant in the DESI survey.” Monthly Notices of the Royal Astronomical Society 522.1 (2023): 117-129. Link

 

Miller, Timothy N., et al. “The Optical Corrector for the Dark Energy Spectroscopic Instrument.” arXiv preprint arXiv:2306.06310 (2023). Link

 

Moon, Jeongin, et al. “First Detection of the BAO Signal from Early DESI Data.” arXiv preprint arXiv:2304.08427 (2023). Link

 

Napolitano, Lucas, et al. “Detecting and Characterizing Mg ii Absorption in DESI Survey Validation Quasar Spectra.” The Astronomical Journal 166.3 (2023): 99. Link

 

Pinelo, Jose EE, et al. “Systematic mapping of the conformational landscape and dynamism of soluble fibrinogen.” Journal of Thrombosis and Haemostasis 21.6 (2023): 1529-1543. Link

 

Pong, Ian, Michael Naus, and Elizabeth Lee. 302.2. 03 Report on P43OL1139. No. FERMILAB-TM-2792; US-HiLumi-doc-3337. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2023. Link

 

Prieto, Carlos Allende, et al. “GTC Follow-up Observations of Very Metal-Poor Star Candidates from DESI.” arXiv preprint arXiv:2306.06321 (2023). Link

 

Rashkovetskyi, Michael, et al. “Validation of semi-analytical, semi-empirical covariance matrices for two-point correlation function for Early DESI data.” arXiv preprint arXiv:2306.06320 (2023). Link

 

Ravoux, Corentin, et al. “The Dark Energy Spectroscopic Instrument: One-dimensional power spectrum from first Lyman-cv forest samples with Fast Fourier Transform.” arXiv preprint arXiv:2306.06311 (2023). Link

 
K. L. Ray, G. Ambrosio, D. W. Cheng, P. Ferracin, S. Prestemon and M. J. Solis, “Applied Metrology for the Assembly of the Nb3Sn MQXFA Quadrupole Magnets for the HL-LHC AUP,” in IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-6, Aug. 2023, Art no. 4001506. Link
 

Rezaie, Mehdi, et al. “Local primordial non-Gaussianity from the large-scale clustering of photometric DESI luminous red galaxies.” arXiv preprint arXiv:2307.01753 (2023). Link

 

Setton, David J., et al. “DESI Survey Validation Spectra Reveal an Increasing Fraction of Recently Quenched Galaxies at z∼ 1.” The Astrophysical Journal Letters 947.2 (2023): L31. Link

 

Trusov, Svyatoslav, et al. “2-point statistics covariance with fewer mocks.” arXiv preprint arXiv:2306.16332 (2023). Link

 

Trusov, Svyatoslav, et al. “The two-point correlation function covariance with fewer mocks.” Monthly Notices of the Royal Astronomical Society 527.3 (2024): 9048-9060. Link

 

Variu, Andrei, et al. “DESI Mock Challenge: Constructing DESI galaxy catalogues based on FastPM simulations.” arXiv preprint arXiv:2307.14197 (2023). Link

~ 5 Quasar Survey. I. A First Sample of 400 New Quasars at z~ 4.7-6.6.\" arXiv preprint arXiv:2302.01777 (2023). Link"}” data-sheets-textstyleruns=”{"1":0}{"1":140,"2":{"2":{"1":2,"2":1136076},"9":1}}” data-sheets-hyperlinkruns=”{"1":140,"2":"https://arxiv.org/abs/2302.01777"}{"1":144}”> 

Yang, Jinyi, et al. “DESI z>~ 5 Quasar Survey. I. A First Sample of 400 New Quasars at z~ 4.7-6.6.” arXiv preprint arXiv:2302.01777 (2023). Link

 

Yu, Jiaxi, et al. “The DESI One-Percent Survey: Exploring A Generalized SHAM for Multiple Tracers with the UNIT Simulation.” arXiv preprint arXiv:2306.06313 (2023). Link

 

Yuan, Sihan, et al. “The DESI One-Percent Survey: Exploring the Halo Occupation Distribution of Luminous Red Galaxies and Quasi-Stellar Objects with AbacusSummit.” arXiv preprint arXiv:2306.06314 (2023). Link

 

Yuan, Sihan, et al. “Unraveling emission line galaxy conformity at z~ 1 with DESI early data.” arXiv preprint arXiv:2310.09329 (2023). Link

 

Mechanical Engineering Department

 

Abbott, R., et al. “Population of Merging Compact Binaries Inferred Using Gravitational Waves through GWTC-3.” Physical Review X 13.1 (2023): 011048. Link

 

Abud, A. Abed, et al. “Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector.” Physical Review D 107.9 (2023): 092012. Link

 

Abed Abud, Adam, et al. arXiv: Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment. No. FERMILAB-PUB-23-132-CSAID-LBNF-ND-T. 2023. Link

 

Abud, A. Abed, et al. “Highly-parallelized simulation of a pixelated LArTPC on a GPU.” Journal of Instrumentation 18.04 (2023): P04034. Link

 

Abed Abud, A., et al. “Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora.” EUROPEAN PHYSICAL JOURNAL. C, PARTICLES AND FIELDS 83.7 (2023): 1-25. Link

 

Collaboration, A. T. L. A. S., and Paul Newman. “Measurement of exclusive pion pair production in proton-proton collisions at {s}= $7 TeV with the ATLAS detector.” (2022). Link

 
Ambrosio, G., et al. Enigineering Specification MQXFA Magnet Interface Specification. No. FERMILAB-TM-2801-TD. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Brookhaven National Lab.(BNL), Upton, NY (United States); Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2023. Link
 

Ambrosio, G., et al. “Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC.” arXiv preprint arXiv:2301.09523 (2023). Link

 

Ambrosio, Giorgio, et al. “Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Anderson, T., et al. “Eos: conceptual design for a demonstrator of hybrid optical detector technology.” Journal of Instrumentation 18.02 (2023): P02009. Link

 

Arbelaez, Diego, et al. “Status of the Nb {3} Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-7. Link

 

Baskys, Algirdas, et al. “Image Analysis Capabilities and Methodologies of Nb 3 Sn Rutherford Cables.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Baskys, A., et al. “RRP Nb 3 Sn Subelement Shear Dependence on Hexagonal Subelement Stack Orientation and the Strand’s Position within a Rutherford Cable.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Berger, B. K., et al. “Searching for the causes of anomalous Advanced LIGO noise.” Applied Physics Letters 122.18 (2023). Link

 

Bocquet, S., et al. “SPT Clusters with DES and HST Weak Lensing. II. Cosmological Constraints from the Abundance of Massive Halos.” arXiv preprint arXiv:2401.02075 (2024). Link

 

Chen, A., et al. “Constraining the baryonic feedback with cosmic shear using the DES Year-3 small-scale measurements.” Monthly Notices of the Royal Astronomical Society 518.4 (2023): 5340-5355. Link

 

Cheng, D. W., et al. “The challenges and solutions of meeting the assembly specifications for the 4.5 m long MQXFA magnets for the Hi-Luminosity LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Clark, Peter, et al. “Long-term follow-up observations of extreme coronal line emitting galaxies.” arXiv preprint arXiv:2307.03182 (2023). Link

 

Cooper, Andrew P., et al. “Overview of the DESI Milky Way Survey.” The Astrophysical Journal 947.1 (2023): 37. Link

 

García, Luz Ángela, et al. “Analysis of the impact of broad absorption lines on quasar redshift measurements with synthetic observations.” arXiv preprint arXiv:2304.05855 (2023). Link

 

Cutler, G., et al. “Experimental testing of a prototype cantilevered liquid‐nitrogen‐cooled silicon mirror.” Journal of Synchrotron Radiation (2023). Link

 

Cutler, G., et al. “Experimental testing of a prototype cantilevered liquid-nitrogen-cooled silicon mirror.” Journal of synchrotron radiation 30.1 (2023). Link

 

Delmotte, Franck, et al. “EUV refractive index measurements with improved accuracy and their impact in component modeling.” Optical and EUV Nanolithography XXXVI. Vol. 12494. SPIE, 2023. Link

 

Fajardo, L. Garcia, et al. “Analysis of the mechanical performance of the 4.2 m long MQXFA magnets for the Hi-Lumi LHC Upgrade.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fajardo, L. Garcia, et al. “Electromechanical analysis for the integration of a Nb 3 Sn and a Bi-2212 CCT dipole magnet for a hybrid magnet test.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fajardo, L. Garcia, et al. “Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5.

 

Ferracin, P., et al. “Conceptual design of 20 T hybrid accelerator dipole magnets.” arXiv preprint arXiv:2302.04940 (2023). Link

 

Ferracin, Paolo, et al. “MQXFA Series Magnet Production Specification.” arXiv preprint arXiv:2302.01291 (2023). Link

 

Ferracin, Paolo, et al. “MQXFA series magnet production specification.” arXiv preprint arXiv:2302.01291 (2023). Link

 

Fletcher, C., et al. “A Joint Fermi-GBM and Swift-BAT Analysis of Gravitational-Wave Candidates from the Third Gravitational-wave Observing Run.” arXiv preprint arXiv:2308.13666 (2023). Link

 

Gao, Hongyu, et al. “The DESI One-Percent survey: constructing galaxy-halo connections for ELGs and LRGs using auto and cross correlations.” arXiv preprint arXiv:2306.06317 (2023). Link

 

Gao, Hongyu, et al. “The DESI One-Percent Survey: A concise model for galactic conformity of ELGs.” arXiv preprint arXiv:2309.03802 (2023). Link

 

Goldberg, Kenneth A., and Kyle T. La Fleche. “Thickness dependence of piezo-bimorph adaptive mirror bending.” Review of Scientific Instruments 94.7 (2023). Link

 

Gullett, Ian, et al. “Sidelobe modeling and mitigation for a three mirror anastigmat cosmic microwave background telescope.” Applied Optics 62.16 (2023): 4334-4341. Link

 

Guo, Wei-Jian, et al. “Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. I. Sample from the Early D Link

 

Guo, Wei-Jian, et al. “Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. I. Sample from the Early Data.” arXiv preprint arXiv:2307.08289 (2023). Link

 

Hadzhiyska, Boryana, et al. “Synthetic light cone catalogues of modern redshift and weak lensing surveys with AbacusSummit.” arXiv preprint arXiv:2305.11935 (2023). Link

 

Hadzhiyska, Boryana, et al. “Planting a Lyman alpha forest on AbacusSummit.” arXiv preprint arXiv:2305.08899 (2023). Link

 

Hadzhiyska, Boryana, et al. “Mitigating the noise of DESI mocks using analytic control variates.” arXiv preprint arXiv:2308.12343 (2023). Link

 

Hahn, ChangHoon, et al. “PROVABGS: The Probabilistic Stellar Mass Function of the BGS One-Percent Survey.” arXiv preprint arXiv:2306.06318 (2023). Link

 

Han, Xue, et al. “Development of deflector mode for spin-resolved time-of-flight photoemission spectroscopy.” Review of Scientific Instruments 94.10 (2023). Link

 

Ikeda, Zenichi, et al. “Discovery of a Novel Series of Potent, Selective, Orally Available, and Brain-Penetrable C1s Inhibitors for Modulation of the Complement Pathway.” Journal of Medicinal Chemistry 66.9 (2023): 6354-6371. Link

 

Janda, M., et al. “Experimental Measurement and Analysis of Insert Debonding in Carbon Fiber Structures for Particle Detectors.” (2023). Link

 

Kent, S., et al. “Astrometric Calibration and Performance of the Dark Energy Survey Instrument Focal Plane.” arXiv preprint arXiv:2307.06238 (2023). Link

 

Krolewski, Alex, et al. “Constraining primordial non-Gaussianity from DESI quasar targets and Planck CMB lensing.” arXiv preprint arXiv:2305.07650 (2023). Link

 

Maciejewski, Micha, et al. “Model-Based System Engineering Framework for Superconducting Accelerator Magnet Design.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Mao, Kei Nakamura, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” (2017). Link

 

Marchevsky, M., et al. “Radio Frequency-Based Diagnostics for Superconducting Magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-6. Link

 

Marinozzi, V., P. Ferracin, and G. Vallone. “Conceptual design of a 20 T hybrid cos-theta dipole superconducting magnet for future high-energy particle accelerators.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Massaro, F., et al. “Powerful Radio Sources in the Southern Sky. II. A Swift X-Ray Perspective.” The Astrophysical Journal Supplement Series 268.1 (2023): 32. Link

 

Miller, Timothy N., et al. “The Optical Corrector for the Dark Energy Spectroscopic Instrument.” arXiv preprint arXiv:2306.06310 (2023). Link

 

Moon, Jeongin, et al. “First Detection of the BAO Signal from Early DESI Data.” arXiv preprint arXiv:2304.08427 (2023). Link

 

Moros, Alice, et al. “A Metallurgical Inspection Method to Assess the Damage in Performance-Limiting Nb 3 Sn Accelerator Magnet Coils.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Moros, Alice, et al. “A metallurgical inspection method to assess the damage in performance-limiting Nb 3 Sn accelerator magnet coils.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Ni, Yuan Qi, et al. “The origin and evolution of the normal Type Ia SN 2018aoz with infant-phase reddening and excess emission.” The Astrophysical Journal 946.1 (2023): 7. Link

 

Pan, Heng, et al. “Mechanical study of a superconducting 28-GHz ion source magnet for FRIB.” IEEE Transactions on Applied Superconductivity 29.5 (2019): 1-6. Link

 

Pong, Ian, et al. “Diameter quality control of Nb 3 Sn wires for MQXF cables in the USA.” IEEE Transactions on Applied Superconductivity 29.5 (2019): 1-5. Link

 

Prieto, Carlos Allende, et al. “GTC Follow-up Observations of Very Metal-Poor Star Candidates from DESI.” arXiv preprint arXiv:2306.06321 (2023). Link

 

Rashkovetskyi, Michael, et al. “Validation of semi-analytical, semi-empirical covariance matrices for two-point correlation function for Early DESI data.” arXiv preprint arXiv:2306.06320 (2023). Link

 

Ray, K. L., et al. “Applied Metrology for the Assembly of the Nb 3 Sn MQXFA Quadrupole Magnets for the HL-LHC AUP.” IEEE Transactions on Applied Superconductivity (2023). Link

 
K. L. Ray, G. Ambrosio, D. W. Cheng, P. Ferracin, S. Prestemon and M. J. Solis, “Applied Metrology for the Assembly of the Nb3Sn MQXFA Quadrupole Magnets for the HL-LHC AUP,” in IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-6, Aug. 2023, Art no. 4001506. Link
 

C. Reis et al., “Investigating Irradiated Superconducting Magnet Insulation Materials for Particle Accelerators and Other High-Dose Environments,” in IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-7, Aug. 2023, Art no. 7700307. Link

 

Rezaie, Mehdi, et al. “Local primordial non-Gaussianity from the large-scale clustering of photometric DESI luminous red galaxies. Link

 

Rochepault, Etienne, Paolo Ferracin, and Giorgio Vallone. “20 T hybrid Nb 3 Sn-HTS block-coil accelerator dipole with stress-management.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Lee, Geon Seok, Maxim Marchevsky, and Soren Prestemon. “Quench Localization for 2G High-Temperature Superconductor Tape Using Acoustic Reflectometry.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Shrestha, Manisha, et al. “Lack of Bright Supernova Emission in the Brightest Gamma-ray Burst, GRB~ 221009A.” arXiv preprint arXiv:2302.03829 (2023). Link

 

Shrestha, Manisha, et al. “Limit on Supernova Emission in the Brightest Gamma-Ray Burst, GRB 221009A.” The Astrophysical Journal Letters 946.1 (2023): L25. Link

 

Shrestha, Manisha, et al. “Lack of Bright Supernova Emission in the Brightest Gamma-ray Burst, GRB~ 221009A.” arXiv preprint arXiv:2302.03829 (2023). Link

 

Shrestha, Manisha, et al. “Limit on Supernova Emission in the Brightest Gamma-Ray Burst, GRB 221009A.” The Astrophysical Journal Letters 946.1 (2023): L25. Link

 

Smith, Nathan, et al. “Changes in an Enzyme Ensemble During Catalysis Observed by High Resolution XFEL Crystallography.” bioRxiv (2023): 2023-08. Link

 

Stern, J., et al. “Developing a vacuum pressure impregnation procedure for CORC Wires.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-4. Link

 

Swanson, Kelly, et al. “A Variable-Radius, Cryogenically-Formed, Gas-filled Capillary Discharge Waveguide.” APS Division of Plasma Physics Meeting Abstracts. Vol. 2020. 2020. Link

 

Todesco, E., et al. “Status and challenges of the interaction region magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing, 2017. Link

 

Troitino, J. Ferradas, et al. “Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets.” Superconductor Science and Technology 36.6 (2023): 065002. Link

 

Tsang, R. H. M., et al. “An integrated online radioassay data storage and analytics tool for nEXO.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 1055 (2023): 168477. Link

 

Turner, Marlene, et al. “BELLA petawatt second beamline commissioning and experimental plans.” APS Division of Plasma Physics Meeting Abstracts. Vol. 2021. 2021. Link

 

Vallone, G., et al. “A Review of the Mechanical Properties of Materials Used in Nb 3 Sn Magnets for Particle Accelerators.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Vallone, G., et al. “Computation of the Strain Induced Critical Current Reduction in the 16 T Nb 3 Sn Test Facility Dipole.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Vallone, G., et al. “A novel design for improving the control on the stainless-steel vessel welding process for superconducting magnets.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-5. Link

 

Vallone, G., et al. “A Review of the Mechanical Properties of Materials Used in Nb 3 Sn Magnets for Particle Accelerators.” IEEE Transactions on Applied Superconductivity (2023). Linkk

 

Variu, Andrei, et al. “DESI Mock Challenge: Constructing DESI galaxy catalogues based on FastPM simulations.” arXiv preprint arXiv:2307.14197 (2023). Link

 

Velev, G. V., et al. “Status of the High Field Cable Test Facility at Fermilab.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Voronov, Dmitriy L., et al. “Advanced low blaze angle x-ray gratings via nanoimprint replication and plasma etch.” Optics Express 31.16 (2023): 26724-26734. Link

 

Wang, X., et al. “An initial look at the magnetic design of a 150 mm aperture high-temperature superconducting magnet with a dipole field of 8 to 10 T.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Wang, Xiaorong, et al. “Field Quality Measurement of a 4.2-m-Long Prototype Low-beta Nb3Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project.” IEEE Transactions on Applied Superconductivity 29.5 (2019): 1-6. Link

 

Wedal, Justin, et al. “Perplexing EPR Signals from 5f36d1 U (II) Complexes.” (2023). Link

 
Wedal, Justin C., et al. “Synthesis and Crystallographic Characterization of a Reduced Bimetallic Yttrium ansa-Metallocene Hydride Complex,[K (crypt)][(μ-CpAn) Y (μ-H)] 2 (CpAn= Me2Si [C5H3 (SiMe3)-3] 2), with a 3.4 Å Yttrium–Yttrium Distance.” Journal of the American Chemical Society 145.19 (2023): 10730-10742. Link
 

Xu, T., et al. “Damping-ring-free electron injector proposal for future linear colliders.” Physical Review Accelerators and Beams 26.1 (2023): 014001. Link

~ 5 Quasar Survey. I. A First Sample of 400 New Quasars at z~ 4.7-6.6.\" arXiv preprint arXiv:2302.01777 (2023). Link"}” data-sheets-textstyleruns=”{"1":0}{"1":140,"2":{"2":{"1":2,"2":1136076},"9":1}}” data-sheets-hyperlinkruns=”{"1":140,"2":"https://arxiv.org/abs/2302.01777"}{"1":144}”> 

Yang, Jinyi, et al. “DESI z>~ 5 Quasar Survey. I. A First Sample of 400 New Quasars at z~ 4.7-6.6.” arXiv preprint arXiv:2302.01777 (2023). Link

 

Zhang, Justin K., et al. “Predictors of Postoperative Segmental and Overall Lumbar Lordosis in Minimally Invasive Transforaminal Lumbar Interbody Fusion: A Consecutive Case Series.” Global Spine Journal (2023): 21925682231193610. Link

 

Zhou, Junze, et al. “Sharp, high numerical aperture (NA), nanoimprinted bare pyramid probe for optical mapping.” Review of Scientific Instruments 94.3 (2023): 033902. Link

 

Zhou, Junze, et al. “Sharp, high numerical aperture (NA), nanoimprinted bare pyramid probe for optical mapping.” Review of Scientific Instruments 94.3 (2023). Link

 

Zhou, Rongpu, et al. “DESI luminous red galaxy samples for cross-correlations.” arXiv preprint arXiv:2309.06443 (2023). Link

Center for X-Ray Optics (CXRO)

The Center for X-Ray Optics at Lawrence Berkeley National Laboratory works to further science and technology using short wavelength optical systems and techniques. We create and operate advanced experimental systems to address national needs, support research in material, life, and environmental science, and extend the forefront of semiconductor manufacturing.

SHARP

Center for X-ray Optics (CXRO) / Advanced Light Source (ALS)

SHARP (SHARP High-NA Actinic Reticle review Project) is a highly-flexible mask-imaging microscope built to support semiconductor research. Masks are glass plates carrying the computer chip patterns that will be transferred onto a silicon wafer using optics that shrink the image further down by a factor four.  SHARP is the world’s highest-resolution EUV (extreme ultraviolet) microscope enabling the characterization of mask defects in great detail. Staffed by experts in the field, SHARP is designed to investigate the most pressing issues in photomask development and commercialization, now and far into the future.

The CXRO engineering team designed, built, and was deeply involved in commissioning SHARP at the Advanced Light Source beamline 11.3.2 in 2013. Since then, the CXRO engineering team has provided continuous support on various aspects of the implementation of multiple upgrades:

  • Tilting zone plate holder (2014)
  • Interchangeable flexures and mask presence sensor for the mask holder (2014)
  • Automatic mask handling system (CXRO/Intel collaboration) and adjustable shutter system (2015–2016)
  • Laser interferometry encoders for the mask and zone plates stages (2016).

MET5

Center for X-ray Optics (CXRO) 

The Berkeley MET5, funded by EUREKA, is an EUV projection lithography tool located at the ALS. With a depth of focus of 30 nm, the 0.5 NA tool requires 1 nm resolution metrology in the three linear directions and 100 nrad in tip/tilt. Wavefront errors need to be smaller than 0.5 nm RMS. Including variable illumination capabilities, MET5  has a proven optical resolution of 9 nm and 0.8 nm stabilization over exposure times as long as 1 min. MET5 includes a two mirror objective with nanometer resolution precision stage systems, and a support/metrology system engineered for high stability. The mechatronics systems are designed to ensure stability against drifts and allow nearly arbitrarily slow experimental resist materials to be characterized.

The CXRO engineering team designed, built, and was deeply involved in commissioning the MET5 facility at the ALS 12.0.1.4 in Q2 2019. Since then, the CXRO engineering team has provided continuous support on various aspects of the implementation of multiple upgrades including:

  • Improve vibration from 1.5 nm to 1 nm RMS (Q4 2019)
  • Commissioning of standalone source (Q4 2021)

AIRES

Center for X-ray Optics (CXRO)

AIRES (Actinic Image REview System) is a plasma-source based ultrahigh resolution zoneplate microscopy tool that addresses the industry need for Extreme Ultraviolet (EUV) mask imaging and defect printability studies. AIRES features a stand alone discharge produced plasma source providing EUV light to the tool.The CXRO engineering team developed the architecture and design of the AIRES tool. AIRES features a solution to mitigate the impact of ground motion onto the performance of the system. The optical column hosts a monochromator to significantly narrow the wavelength, allowing unique CXRO-developed zoneplates optics to be used. The system successfully produced its first image in January 2020. Since then, the CXRO engineering team has provided continuous support to the customer on various aspects, including delivering a new monochromator upgraded with motorized stages. After the installation in July 2022, the throughput was improved by 2x.

TPI

Center for X-ray Optics (CXRO)

Lithography masks act as the master copy from which wafers are printed, they must therefore be inspected so that any defect can be identified. It is also essential that no particles be deposited on the mask. A recent development in particulate contamination prevention and control has been the use of pellicles. Pellicles are thin membranes placed a few millimeters above the mask to keep particles from falling onto the imaging surface. In 2022, the CXRO engineering team installed the (Through Pellicle Inspection) mask inspection tool at the ALS 11.3.2 beamline. TPI features a working distance long enough to focus past the pellicle. The tool is currently being calibrated. Upon completion, the TPI microscope will be among the highest resolution EUV microscopes in the world, capable of imaging features on a mask with a half-pitch of 25 nm, with potential for even greater resolution with higher-NA zone plates. 

More info: http://cxro.lbl.gov/

Division All Hands Brown Bag Meetings

Add ‘EG Meetings’ calendar for future All Hands Brown Bag Meetings

Topics and Links to Presentations Speakers, Date of Meeting
Developing a Replacement Photon Stop for ALS Nicholas Wenner, 01/18/24
ALS-U Magnet Measurements Erik Wallen, 02/29/2024
Detectors for the CMB-S4 Experiment Rebecca Carney, 03/21/2024
Stewardship Values Jeffrey Takakuwa, 04/23/2024

Engineering Division 2020 Publications

This site will be updated on a regular basis.

Electronics, Software, and Instrumentation Engineering Department

G. Aad, et al. “Search for heavy Higgs bosons decaying into two tau leptons with the ATLAS detector using p p collisions at s= 13 TeV.” Physical review letters 125.5 (2020): 051801. Link
 

G. Aad, et al. “C P Properties of Higgs Boson Interactions with Top Quarks in the t t¯ H and t H Processes Using H→ γ γ with the ATLAS Detector.” Physical review letters 125.6 (2020): 061802. Link

 

G. Aad, et al. “Dijet Resonance Search with Weak Supervision Using s= 13 TeV p p Collisions in the ATLAS Detector.” Physical review letters 125.13 (2020): 131801. Link

 

Aartsen, M. G., et al. “In-situ calibration of the single-photoelectron charge response of the IceCube photomultiplier tubes.” Journal of Instrumentation 15.06 (2020): P06032. Link

 

Aartsen, M. G., et al. “IceCube search for high-energy neutrino emission from TeV pulsar wind nebulae.” The Astrophysical Journal 898.2 (2020): 117. Link

 

Aartsen, M. G., et al. “Constraints on neutrino emission from nearby galaxies using the 2MASS redshift survey and IceCube.” Journal of Cosmology and Astroparticle Physics 2020.07 (2020): 042. Link

 

Aartsen, M. G., et al. “A search for IceCube events in the direction of ANITA neutrino candidates.” The Astrophysical Journal 892.1 (2020): 53. Link

 

Aartsen, M. G., et al. “A search for MeV to TeV neutrinos from fast radio bursts with IceCube.” The Astrophysical Journal 890.2 (2020): 111. Link

 

Aartsen, M. G., et al. “Search for PeV Gamma-Ray Emission from the Southern Hemisphere with 5 Yr of Data from the IceCube Observatory.” The Astrophysical Journal 891.1 (2020): 9. Link

 

Aartsen, M. G., et al. “A search for neutrino point-source populations in 7 yr of IceCube data with neutrino-count statistics.” The Astrophysical Journal 893.2 (2020): 102. Link

 

Aartsen, M. G., et al. “Development of an analysis to probe the neutrino mass ordering with atmospheric neutrinos using three years of IceCube DeepCore data.” The European Physical Journal C 80.1 (2020): 1-16. Link

 

Aartsen, M. G., et al. “Design and performance of the first IceAct demonstrator at the South Pole.” Journal of Instrumentation 15.02 (2020): T02002. Link

 

Aartsen, M. G., et al. “IceCube search for neutrinos coincident with compact binary mergers from LIGO-virgo’s first gravitational-wave transient catalog.” The Astrophysical Journal Letters 898.1 (2020): L10. Link

 

B. Abi et al., “First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform,” B. Abi et al 2020 JINST 15 P12004, (3 Dec. 2020). Link

 

B. Abi et al., “Neutrino interaction classification with a convolutional neural network in the DUNE far detector,” Dune Collaboration Vol. 102, Iss. 9, (9 Nov. 2020). Link

 

B. Abi, R. Acciarri, M.A. Acero, et al. “Long-baseline neutrino oscillation physics potential of the DUNE experiment,” Eur. Phys. J. C 80, 978, (22 Oct. 2020). Link

 

B. Abi, R. Acciarri, M.A. Acero, et al. “Volume III. DUNE far detector technical coordination,” JINST 15 T08009, (27 Aug. 2020). Link

 

B. Abi et al., “Volume IV. The DUNE far detector single-phase technology,” JINST 15 T08010, (27 Aug. 2020). Link

 

B. Abi et al., “Volume I. introduction to DUNE,” JINST 15 T08008, (27 Aug. 2020). Link

 

B. Abi et al., “Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology,” arXiv:2002.03010, (25 March 2020). Link

 

B. Abi et al., “Deep underground neutrino experiment (DUNE), far detector technical design report, Volume II: DUNE physics,” arXiv preprint arXiv:2002.03005, (7 Feb. 2020). Link

 

O. E. Agazzi et al., (2020) “High-speed receiver architecture,” (U.S. Patent 10841013). U.S. Patent and Trademark Office. Link

 

Alexopoulos, T., et al. “The VMM readout system.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 955 (2020): 163306. Link

 

Alexopoulos, T., et al. “Characterization of the VMM front-end ASIC for High-Resolution Applications.” 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2020. Link

 

Anker, A., et al. “A search for cosmogenic neutrinos with the ARIANNA test bed using 4.5 years of data.” Journal of Cosmology and Astroparticle Physics 2020.03 (2020): 053. Link

 

ATLAS Collaboration. “Observation and measurement of forward proton scattering in association with lepton pairs produced via the photon fusion mechanism at ATLAS.” Physical review letters 125.26 (2020): 261801. Link

 

ATLAS Collaboration. “Search for resonances decaying into a weak vector boson and a Higgs boson in the fully hadronic final state produced in proton− proton collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 102.11 (2020): 112008. Link

 

ATLAS Collaboration. “Search for Higgs boson decays into two new low-mass spin-0 particles in the 4b channel with the ATLAS detector using pp collisions at √s = 13 TeV.” arXiv preprint arXiv:2005.12236 (2020). Link

 

ATLAS Collaboration. “Alignment of the ATLAS inner detector in Run 2.” The European Physical Journal C 80.12 (2020): 1-41. Link

 

ATLAS Collaboration. “Search for heavy diboson resonances in semileptonic final states in pp collisions at √s =13 TeV with the ATLAS detector.” arXiv preprint arXiv:2004.14636 (2020). Link

 

ATLAS Collaboration. “Search for Higgs Boson Decays into a Z Boson and a Light Hadronically Decaying Resonance Using 13 TeV p p Collision Data from the ATLAS Detector.” Physical review letters 125.22 (2020): 221802. Link

 

ATLAS Collaboration. “Performance of the upgraded PreProcessor of the ATLAS Level-1 Calorimeter Trigger.” Journal of instrumentation 15.CERN-EP-2020-042 (2020). Link

 

ATLAS Collaboration. “Measurement of the tt¯ production cross-section in the lepton+ jets channel at s= 13 TeV with the ATLAS experiment.” Physics Letters B 810 (2020): 135797. Link

 

ATLAS Collaboration. “Evidence for tt¯ tt¯ production in the multilepton final state in proton–proton collisions at√ s= 13 TeV with the ATLAS detector.” (2020). Link

 

ATLAS Collaboration. “Reconstruction and identification of boosted di-τ systems in a search for Higgs boson pairs using 13 TeV proton-proton collision data in ATLAS.” Journal of High Energy Physics 2020.11 (2020): 1-47. Link

 

ATLAS Collaboration. “Search for top squarks in events with a Higgs or Z boson using 139 fb⁻¹ of pp collision data at √s =13 TeV with the ATLAS detector.” The European Physical Journal C 80.11 (2020): 1-33. Link

 

ATLAS Collaboration. “Search for new non-resonant phenomena in high-mass dilepton final states with the ATLAS detector.” Journal of High Energy Physics 2020.11 (2020): 1-41. Link

 

ATLAS Collaboration. “Search for squarks and gluinos in final states with jets and missing transverse momentum using 139 fb⁻¹ √s = 13 TeV pp collision data with the ATLAS detector.” arXiv preprint arXiv:2010.14293 (2020). Link

 

ATLAS Collaboration. “Measurements of the Higgs boson inclusive and differential fiducial cross sections in the 4el decay channel at √s = 13 TeV.” arXiv preprint arXiv:2004.03969 (2020). Link

 

ATLAS Collaboration. “A search for the Zgamma decay mode of the Higgs boson in pp collisions at √s = 13 TeV with the ATLAS detector.” arXiv preprint arXiv:2005.05382 (2020). Link

 

ATLAS Collaboration. “Search for direct production of electroweakinos in final states with missing transverse momentum and a Higgs boson decaying into photons in pp collisions at √s = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.10 (2020): 1-46. Link

 

ATLAS Collaboration. “Higgs boson production cross-section measurements and their EFT interpretation in the 4ℓ decay channel at s√ = 13 TeV with the ATLAS detector.” arXiv preprint arXiv:2004.03447 (2020). Link

 

ATLAS Collaboration. “Search for pairs of scalar leptoquarks decaying into quarks and electrons or muons in √s = 13 TeV pp collisions with the ATLAS detector.” Journal of High Energy Physics 2020.10 (2020): 1-45. Link

 

ATLAS Collaboration. “Search for new phenomena in final states with large jet multiplicities and missing transverse momentum using √(s) = 13 TeV proton – proton collisions recorded by ATLAS in Run 2 of the LHC.” arXiv preprint arXiv:2008.06032 (2020). Link

 

ATLAS Collaboration. “Search for tt¯ resonances in fully hadronic final states in pp collisions at √s = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.10 (2020): 1-43. Link

 

ATLAS Collaboration. “Dijet Resonance Search with Weak Supervision Using s= 13 TeV p p Collisions in the ATLAS Detector.” Physical review letters 125.13 (2020): 131801. Link

 

ATLAS Collaboration. “Optimisation of large-radius jet reconstruction for the ATLAS detector in 13 TeV proton-proton collisions.” arXiv preprint arXiv:2009.04986 (2020). Link

 

ATLAS Collaboration. “A search for the decay mode of the Higgs boson in Collisions at with the ATLAS detector.” Physics Letters B 809 (2020). Link

 

ATLAS Collaboration. “Measurements of inclusive and differential cross-sections of combined tt¯ gamma and tWγ production in the eμ channel at 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.9 (2020): 1-47. Link

 

ATLAS Collaboration. “Search for long-lived, massive particles in events with a displaced vertex and a muon with large impact parameter in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 102.3 (2020): 032006. Link

 

ATLAS Collaboration. “Combination of the W boson polarization measurements in top quark decays using ATLAS and CMS data at √s = 8 TeV.” Journal of high energy physics 2020.8 (2020): 1-67. Link

 

ATLAS Collaboration. “Search for heavy neutral Higgs bosons produced in association with b-quarks and decaying into b-quarks at s= 13 TeV with the ATLAS detector.” Physical review D 102.3 (2020): 032004. Link

 

ATLAS Collaboration. “Measurement of azimuthal anisotropy of muons from charm and bottom hadrons in Pb+ Pb collisions at √sNN = 5.02 TeV with the ATLAS detector.” Physics Letters B 807 (2020): 135595. Link

 

ATLAS collaboration. “Measurement of the associated production of a Higgs boson decaying into b -quarks with a vector boson at high transverse momentum in pp collisions at √s = 13 TeV with the ATLAS detector.” (2020). Link

 

ATLAS Collaboration. “C P Properties of Higgs Boson Interactions with Top Quarks in the t t¯ H and t H Processes Using H→ γ γ with the ATLAS Detector.” Physical review letters 125.6 (2020): 061802. Link

 

ATLAS Collaboration. “Performance of the missing transverse momentum triggers for the ATLAS detector during Run-2 data taking.” Journal of High Energy Physics 2020.8 (2020): 1-53. Link

 

ATLAS Collaboration. “Search for direct production of electroweakinos in final states with one lepton, missing transverse momentum and a Higgs boson decaying into two b-jets in pp collisions at.” Eur. Phys. J. C 80.8 (2020). Link

 

ATLAS Collaboration. “Combination of the W boson polarization measurements in top quark decays using ATLAS and CMS data at √s = 8 TeV.” Journal of high energy physics 2020.8 (2020): 1-67. Link

 

ATLAS Collaboration. “Measurements of top-quark pair spin correlations in the eμ channel at √s = 13 TeV using pp collisions in the ATLAS detector.” The European Physical Journal C 80.8 (2020): 1-43. Link

 

ATLAS Collaboration. “Search for heavy Higgs bosons decaying into two tau leptons with the ATLAS detector using p p collisions at s= 13 TeV.” Physical review letters 125.5 (2020): 051801. Link

 

ATLAS Collaboration. “Measurements of the production cross-section for a Z boson in association with b-jets in proton-proton collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2003.11960 (2020). Link

 

ATLAS Collaboration. “Search for the HH→ bb–bb– process via vector-boson fusion production using proton-proton collisions at √s = 13 TeVV with the ATLAS detector.” arXiv preprint arXiv:2001.05178 (2020). Link

 

ATLAS Collaboration. “Measurement of the transverse momentum distribution of Drell–Yan lepton pairs in proton–proton collisions at s√=13TeV with the ATLAS detector.” Eur. Phys. J. C 80, 616 (2020). Link

 

ATLAS Collaboration. “Observation of the associated production of a top quark and a Z boson in pp collisions at √s = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.7 (2020): 1-46. Link

 

ATLAS Collaboration. “Search for dijet resonances in events with an isolated charged lepton using √s = 13 TeV proton-proton collision data collected by the ATLAS detector.” Journal of high energy physics 2020.6 (2020): 1-42. Link

 

ATLAS Collaboration. “Test of CP invariance in vector-boson fusion production of the Higgs boson in the H→ττ channel in proton−proton collisions at s√ = 13 TeV with the ATLAS detector.” arXiv preprint arXiv:2002.05315 (2020). Link

 

ATLAS Collaboration. “Search for squarks and gluinos in final states with same-sign leptons and jets using 139 fb⁻¹ of data collected with the ATLAS detector.” Journal of high energy physics 2020.6 (2020): 1-44. Link

 

ATLAS Collaboration. “Measurement of the tt¯ production cross-section and lepton differential distributions in eμ dilepton events from pp collisions at√s = 13 TeV with the ATLAS detector.” The European Physical Journal C 80.6 (2020): 1-70. Link

 

ATLAS Collaboration. “Evidence for electroweak production of two jets in association with a Zγ pair in pp collisions at s= 13 TeV with the ATLAS detector.” Physics Letters B 803 (2020): 135341. Link

 

ATLAS Collaboration. “Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in s= 13 TeV p p collisions with the ATLAS detector.” Physical Review D 101.7 (2020): 072001. Link

 

ATLAS Collaboration. “Search for long-lived neutral particles produced in p p collisions at s= 13 TeV decaying into displaced hadronic jets in the ATLAS inner detector and muon spectrometer.” Physical review D 101.5 (2020): 052013. Link

 

ATLAS Collaboration. “Measurement of soft-drop jet observables in p p collisions with the ATLAS detector at s= 13 TeV.” Physical review D 101.5 (2020): 052007. Link

 

ATLAS Collaboration. “Searches for electroweak production of supersymmetric particles with compressed mass spectra in s= 13 TeV p p collisions with the ATLAS detector.” Physical Review D 101.5 (2020): 052005. Link

 

ATLAS Collaboration. “Z boson production in Pb+ Pb collisions at sNN= 5.02 TeV measured by the ATLAS experiment.” Physics Letters B 802 (2020): 135262. Link

 

ATLAS Collaboration. “Measurement of the Z(→ ℓ+ℓ−)γ production cross-section in pp collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.3 (2020): 1-52. Link

 

ATLAS Collaboration. “Search for new resonances in mass distributions of jet pairs using 139 fb−1 of pp collisions at √s = 13 TeV with the ATLAS detector.” Journal of high energy physics 2020.3 (2020): 1-41. Link

 

ATLAS Collaboration. Measurement of isolated-photon plus two-jet production in pp collisions at s√ = 13 TeV with the ATLAS detector. J. High Energ. Phys. 2020, 179 (2020). Link

 

ATLAS Collaboration. “Search for the Higgs boson decays H→ ee and H→ eμ in pp collisions at s= 13TeV with the ATLAS detector.” Physics Letters B 801 (2020): 135148. Link

 

ATLAS Collaboration. “Search for displaced vertices of oppositely charged leptons from decays of long-lived particles in pp collisions at s= 13 TeV with the ATLAS detector.” Physics Letters B 801 (2020): 135114. Link

 

ATLAS Collaboration. “Search for non-resonant Higgs boson pair production in the bbℓνℓν final state with the ATLAS detector in pp collisions at s= 13 TeV.” Physics Letters B 801 (2020): 135145. Link

 

ATLAS Collaboration. “Measurement of the azimuthal anisotropy of charged-particle production in Xe+ Xe collisions at s N N= 5.44 TeV with the ATLAS detector.” Physical review C 101.2 (2020): 024906. Link

 

ATLAS Collaboration. “Measurement of differential cross sections for single diffractive dissociation in √s = 8 TeV pp collisions using the ATLAS ALFA spectrometer.” Journal of High Energy Physics 2020.2 (2020): 1-37. Link

 

ATLAS Collaboration. Search for electroweak production of charginos and sleptons decaying into final states with two leptons and missing transverse momentum in s√=13 TeV pp collisions using the ATLAS detector. Eur. Phys. J. C 80, 123 (2020). Link

 

ATLAS Collaboration. “Searches for lepton-flavour-violating decays of the Higgs boson in s= 13 TeV pp collisions with the ATLAS detector.” Physics Letters B 800 (2020): 135069. Link

 

ATLAS Collaboration. “Combined measurements of Higgs boson production and decay using up to 80 fb (-1) of proton-proton collision data at root S= 13 TeV collected with the ATLAS experiment.” Physical Review D 101 (2020). Link

 

ATLAS Collaboration. Search for the HH → bb-bb- process via vector-boson fusion production using proton-proton collisions at s√ = 13 TeV with the ATLAS detector. J. High Energ. Phys. 2020, 108 (2020). Link

 

ATLAS collaboration. “Measurements of inclusive and differential cross-sections of combined tt¯γ and tWγ production in the eμ channel at 13 TeV with the ATLAS detector.” arXiv preprint arXiv:2007.06946 (2020). Link

 

ATLAS Collaboration. “Measurement of J/ψ production in association with a W±boson with pp data at 8 TeV.” Journal of high energy physics 2020.1 (2020): 1-38. Link

 

ATLAS collaboration. “Performance of the ATLAS muon triggers in Run 2.” arXiv preprint arXiv:2004.13447 (2020). Link

 

ATLAS Collaboration. “Search for the HH-> b (b) over-barb (b) over-bar process via vector-boson fusion production using proton-proton collisions at root s= 13 TeV with the ATLAS detector (vol 7, 108, 2020).” Journal of High Energy Physics 2021.1 (2021): 145. Link

 

ATLAS Collaboration. “A search for the Z gamma decay mode of the Higgs boson in pp collisions at root s= 13 TeV with the ATLAS detector.” (2020). Link

 

ATLAS Collaboration. “Measurement of differential cross sections for single diffractive dissociation in root s= 8 TeV pp collisions using the ATLAS ALFA spectrometer (vol 02, 042, 2020).” Journal of High Energy Physics (JHEP) 10 (2020).

 

ATLAS Collaboration. “Measurement of the Lund jet plane using charged particles in 13 TeV proton-proton collisions with the ATLAS detector.” arXiv preprint arXiv:2004.03540 (2020). Link

 

ATLAS Collaboration. “Fluctuations of anisotropic flow in Pb+ Pb collisions at √sNN = 5.02 TeV with the ATLAS detector.” Journal of High Energy Physics 2020.1 (2020): 1-59. Link

 

ATLAS Collaboration. Measurement of long-range two-particle azimuthal correlations in Z-boson tagged pp collisions at s√=8 and 13 TeV. Eur. Phys. J. C 80, 64 (2020). Link

 

ATLAS Collaboration. Erratum to: Measurement of differential cross sections and W+/W− cross-section ratios for W boson production in association with jets at s√ = 8 TeV with the ATLAS detector. J. High Energ. Phys. 2020, 48 (2020). Link

 

ATLAS Collaboration. “Performance of electron and photon triggers in ATLAS during LHC Run 2.” The European Physical Journal C 80.1 (2020): 1-41. Link

 

ATLAS Collaboration. “Combination of searches for Higgs boson pairs in pp collisions at s= 13TeV with the ATLAS detector.” Physics Letters B 800 (2020): 135103. Link

 

ATLAS Collaboration. “ATLAS data quality operations and performance for 2015-2018 data-taking.” Journal of instrumentation 15 (2020). Link

 

Bakalis, C. “SCA eXtension: a Design for FPGA Parameter Configuration within the ATLAS DAQ Scheme.” No. ATL-DAQ-PROC-2020-017. ATL-COM-DAQ-2020-016, 2020. Link

 

Mohammed, Bashir, et al. “Deep reinforcement learning based control for two-dimensional coherent combining.” Advanced Solid State Lasers. Optical Society of America, 2020. Link

 

Besuner, Robert, et al. “Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope.” Ground-based and Airborne Instrumentation for Astronomy VIII. Vol. 11447. SPIE, 2020. Link

 

Bheesette, Srinidhi, and Marcos Turqueti. “Electron Gun-Based Magnetic Probe.” 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE. Link

 

Brouwer, L., et al. “Design and test of a curved superconducting dipole magnet for proton therapy.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 957 (2020): 163414. Link

 

M. P. Decowski et al., “Long-baseline neutrino oscillation physics potential of the DUNE experiment: DUNE Collaboration,” European Physical Journal C, 80 (10), (2020). Link

 

Du, Qiang, et al. “Characterization and Control of 81-beam Diffractive Coherent Combining.” Advanced Solid State Lasers. Optica Publishing Group, 2020. Link

 

D.A. Dwyer et al., “Snowmass2021 Letter of Interest: An R&D Collaboration for Scalable Pixelated Detector Systems,” An R&D Collaboration for Scalable Pixelated Detector Systems, (31, Aug. 2020). Link

 

Ercius, P., Johnson, I., Brown, H., Pelz, P., Hsu, S., Draney, B., . . . Denes, P. (2020). The 4D Camera – An 87 kHz Frame-rate Detector for Counted 4D-STEM Experiments. Microscopy and Microanalysis, 26(S2), 1896-1897. Link

 

Ercius, Peter, et al. “The 4D camera–An 87 kHz frame-rate detector for counted 4D-STEM experiments.” Microscopy and Microanalysis 26.S2 (2020): 1896-1897. Link

 

Ercius, Peter, et al. “The 4D camera–An 87 kHz frame-rate detector for counted 4D-STEM experiments.” Microscopy and Microanalysis 26.S2 (2020): 1896-1897. Link

 

Feng, H., et al. “Proposed design and optimization of a higher harmonic cavity for ALS-U.” Review of Scientific Instruments 91.1 (2020): 014712. Link

 

Fernandes, A. F. M., et al. “Low-diffusion Xe-He gas mixtures for rare-event detection: electroluminescence yield.” Journal of High Energy Physics 2020.4 (2020): 1-18. Link

 

Ghosh, S., et al. “Dependence of polytetrafluoroethylene reflectance on thickness at visible and ultraviolet wavelengths in air.” Journal of Instrumentation 15.11 (2020): P11031. Link

 

C. Grace, Dwyer, Daniel, Madigan, Peter, and USDOE. Hydra Network Automatic Configuration (Hydra Autoconfig) v1. Computer software. USDOE. (8 Oct. 2020), Web. Link

 

C. Grace et al., “ColdADC: A 16-Channel Digitizer ASIC with 186 µV-rms noise and 10.5-bit ENOB at 77 K for the Deep Underground Neutrino Experiment,” 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), (2020), pp. 1-2. Link

 

C. Grace, P. Denes, E. Fong, A. Goldschmidt and A. Papadopoulou, “A 4-MHz, 256-Channel Readout ASIC for Column-Parallel CCDs With 78.7-dB Dynamic Range,” in IEEE Transactions on Nuclear Science, vol. 67, no. 5, pp. 823-831, (May 2020). Link

 

C. R. Grace, P. Denes, E. Fong, D. Gnani and T. Stezelberger, “A 24-Channel Digitizer and Digital Serial Interface ASIC for High-Speed Detector Instrumentation,” 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2020, pp. 1-2. Link

 

Grace, C. R., et al. “A 4-MHz, 256-Channel Readout ASIC for Column-Parallel CCDs With 78.7-dB Dynamic Range.” IEEE Transactions on Nuclear Science 67.5 (2020): 823-831. Link

 

R. G. Huang et al., “Cryogenic characterization of 180 nm CMOS technology at 100 mK,” JINST 15 P06026, (23 June 2020). Link

 

R. G. Huang et al., “Cryogenic Electronics Development for CUPID,” J. Phys.: Conf. Ser. 1468 012229, (1 Feb. 2020). Link

 

S. Jones et al., “Deep underground neutrino experiment (dune), far detector technical design report, volume ii dune physics,” arXiv: 2002.03005, (7 Feb. 2020). Link

 

M. Leibovitch et al., “Characterization of LArPix: low-power 3D pixelated charge readout for liquid argon time projection chambers,” Bulletin of the American Physical Society, (18 April 2020). Link

 

Liu, Peilian, et al. “Measured effectiveness of deep N-well substrate isolation in a 65 nm pixel readout chip prototype.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 966 (2020): 163842. Link

 

M. S. Mahmud, S. U. Qaisar, A. Lambert and C. Benson, “Demonstration of LEO object detection using GNSS passive radar: A proof of concept,” 2020 IEEE/ION Position, Location and Navigation Symposium (PLANS), 2020, pp. 1556-1562, doi: 10.1109/PLANS46316.2020.9110124. Link

 

Martin, Benjamin, Valerie Fleischauer, and Azriel Goldschmidt. Spectro CCD X-ray Camera. No. DOE-SYDORINSTUMENTS-11269. Sydor Instruments, LLC, Fairport, NY (United States), 2020. Link

 

Perruchot, Sandrine, et al. “Testing the 10 spectrograph units for DESI: approach and results.” Ground-based and Airborne Instrumentation for Astronomy VIII. Vol. 11447. SPIE, 2020. Link

 

Portmann, G. J., et al. “BPM Electronics with Self-Calibration at the ALS.” Proc. 9th Int. Beam Instrumentation Conf.(IBIC’20). 2020. Link

 

Rogers, L., et al. “Mitigation of backgrounds from cosmogenic 137Xe in xenon gas experiments using 3He neutron capture.” Journal of Physics G: Nuclear and Particle Physics 47.7 (2020): 075001.Link

 

Stezelberger, Thorsten, et al. “Data Acquisition and Signal Processing for the Gamma Ray Energy Tracking Array (GRETA).” arXiv preprint arXiv:2011.00129 (2020), Link

 

P.Varghese, et al. “Performance of the LLRF System for the Fermilab PIP-II Injector Test,” 2021, doi:10.18429/JACoW-IPAC2021-THPAB338. Link

 

Varghese, P., et al. “Resonance Control System for the PIP-II IT HWR Cryomodule” (2020), Link

 

Wang, Xiaorong, et al. “Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC® wires.” Superconductor Science and Technology 34.1 (7 Dec. 2020): 015012. Link

 

Wang, Dan, et al. “Artificial neural networks applied to stabilization of 81-beam coherent combining.” Advanced Solid State Lasers. Optical Society of America, 2020. Link

 

Weber, J., et al. “Advanced Light Source High Speed Digitizer.” (2020). Link

 

Woodruff, K., et al. “Radio frequency and DC high voltage breakdown of high pressure helium, argon, and xenon.” Journal of Instrumentation 15.04 (2020): P04022. Link

 

Yashchuk, Valeriy V., et al. “Multifunctional light beam source for surface slope measuring long trace profilers.” Advances in Metrology for X-Ray and EUV Optics IX. Vol. 11492. SPIE, (21 August 2020). Link

 

Zhou, Tong, et al. “Distributed Spectral Filtering for Ultrafast Fiber Lasers.” Advanced Solid State Lasers. Optical Society of America, 13 Oct. 2020. Link

 

Magnetics Engineering Department

Amm, Kathleen, et al. “The US Magnet Development Program-Preparing for the Next Generation Colliders.” LOI: Snowmass21-AF4-AF7-187. Link
 

Arbelaez, D., et al. “Numerical Modeling for Superconducting Accelerator Magnets.” Snowmass21 LOI (2020).Link

 

Arbelaez, D., et al. “Stress Management Technology for High-field Accelerator Magnets based on Stress/strain Sensitive Superconductors.” Link

 

Caspi, Shlomo, et al. Left-right canted-cosine-theta magnets. No. 10,586,678. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2020. Link

 

D. W. Cheng et al., “Mechanical Performance of the First Two Prototype 4.5 m Long Nb3Sn Low-β Quadrupole Magnets for the Hi-Lumi LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-6, June 2020, Art no. 4000906. Link

 

Ferracin, P., et al. “20 T hybrid magnets.” Link

 

M. Juchno et al., “Conceptual Design of Superbend and Hardbend Magnets for Advance Light Source Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-5, June 2020, Art no. 4100505. Link

 

M. Marchevsky et al., “Structural Diagnostics of Superconducting Magnets Using Diffuse Field Ultrasound,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-4, June 2020, Art no. 4703404. Link

 

Martínez, Aurora Cecilia Araujo, et al. “An electric-circuit model on the inter-tape contact resistance and current sharing for REBCO cable and magnet applications.” IEEE Transactions on Applied Superconductivity 30.4 (2020): 1-5. Link

 

Muratore, Joseph F., et al. “Test results of the first two full-length prototype quadrupole magnets for the LHC hi-lumi upgrade.” IEEE Transactions on Applied Superconductivity 30.4 (2020): 1-5. Link

 

Palken, D. A., et al. “Improved analysis framework for axion dark matter searches.” Physical Review D 101.12 (2020): 123011. Link

 

H. Pan et al., “Fracture Failure Analysis for MQXFA Magnet Aluminum Shells,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-7, June 2020, Art no. 4002307. Link

 

Prestemon, Soren, et al. “The 2020 updated roadmaps for the US magnet development program.” arXiv preprint arXiv:2011.09539 (2020). Link

 

Prestemon, Soren. Superconducting Magnet Development For Proton And Heavy Ion Therapy Gantries. No. LBNL-2001364; CRADA AWD00000928; FP00001587. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2020. Link

 

E. Rochepault et al., “3D Conceptual Design of F2D2, the FCC Block-Coil Short Model Dipole,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-5, June 2020, Art no. 4001005. Link

 

Shen, Tengming, and Laura Garcia Fajardo. “Superconducting accelerator magnets based on high-temperature superconducting Bi-2212 round wires.” Instruments 4.2 (2020): 17. Link

 

E. Takala et al., “Preload Characterization of Short Models of MQXF the Nb3Sn Low-β Quadrupole for the Hi-Lumi LHC,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-6, June 2020, Art no. 4002806. Link

 

R. Teyber et al., “Combined Function Magnetic Measurement System,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-5, June 2020, Art no. 9000805. Link

 

Teyber, Reed, et al. “CORC cable terminations with integrated Hall arrays for quench detection.” Superconductor Science and Technology 33.9 (2020): 095009. Link

 

Teyber, Reed, et al. “Combined Function Magnetic Measurement System.” IEEE Transactions on Applied Superconductivity 30.4 (2020): 1-5. Link

 

Teyber, Reed, et al. “Thermoeconomic cost optimization of superconducting magnets for proton therapy gantries.” Superconductor Science and Technology 33.10 (2020): 105005. Link

 

G. Vallone, E. Anderssen, B. Bordini, P. Ferracin, J. Ferradas Troitino, and S. Prestemon, “A methodology to compute the critical current limit in Nb 3 Sn magnets,” Superconductor Science and Technology, Oct. 2020. Link

 

Vallone, Giorgio, et al. “A methodology to compute the critical current limit in Nb3Sn magnets.” Superconductor Science and Technology 34.2 (2020). Link

 

Wang, Xiaorong, et al. “Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC® wires.” Superconductor Science and Technology 34.1 (2020): 015012. Link

 

Manufacturing Engineering and CAD Department

Poppett, Claire, et al. “Performance of the dark energy spectroscopic instrument (DESI) fiber system.” Ground-based and Airborne Instrumentation for Astronomy VIII. Vol. 11447. SPIE, 2020. Link

 

Mechanical Engineering

Abbott, B. P., et al. “VizieR Online Data Catalog: 2015-2017 LIGO obs. analysis for 221 pulsars (Abbott+, 2019).” VizieR Online Data Catalog (2020): J-ApJ. Link
 

Abi, B., et al. “First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform.” Journal of Instrumentation 15.12 (2020): P12004. Link

 

Abi, B., et al. “Neutrino interaction classification with a convolutional neural network in the DUNE far detector.” Physical Review D 102.9 (2020): 092003. Link

 

Abi, B., et al. “Long-baseline neutrino oscillation physics potential of the DUNE experiment.” The European Physical Journal C 80.10 (2020): 1-34. Link

 

Abi, Babak, et al. “Volume IV. The DUNE far detector single-phase technology.” Journal of Instrumentation 15.08 (2020): T08010. Link

 

Abi, Babak, et al. “Volume I. introduction to DUNE.” Journal of instrumentation 15.08 (2020): T08008. Link

 

Abi, B., et al. “First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform.” Journal of Instrumentation 15.12 (2020): P12004. Link

 

Abi, Babak, et al. “Deep underground neutrino experiment (dune), far detector technical design report, volume ii: Dune physics.” arXiv preprint arXiv:2002.03005 (2020). Link

 

Anderson, Chris, et al. “How we are making the 0.5-NA Berkeley mirco-field exposure tool stable and productive.” Extreme Ultraviolet (EUV) Lithography XI. Vol. 11323. SPIE, 2020. Link

 

Wojdyla, Antoine, et al. Preliminary design of a set of four beamlines for the DLSR upgrade of the advanced light source. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2020.

 

C. Anderson, et al. “How we are making the 0.5-NA Berkeley mirco-field exposure tool stable and productive.” Extreme Ultraviolet (EUV) Lithography XI. Vol. 11323. International Society for Optics and Photonics, 2020. Link

 

D. Androić, et al. “Precision Measurement of the Beam-Normal Single-Spin Asymmetry in Forward-Angle Elastic Electron-Proton Scattering.” Physical review letters 125.11 (8 September 2020): 112502. Link

 

D. Androić, et al. “Parity-violating inelastic electron-proton scattering at low Q 2 above the resonance region.” Physical Review C 101.5 (12 May 2020): 055503. Link

 

Besuner, Robert, et al. “Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope.” Ground-based and Airborne Instrumentation for Astronomy VIII. Vol. 11447. SPIE, 2020. Link

 

H. T. Cao et al., “Enhancing the dynamic range of deformable mirrors with compression bias,” Optics Express, vol. 28, no. 26, p. 38480, Dec. 2020. Link

 

D. W. Cheng et al., “Mechanical Performance of the First Two Prototype 4.5 m Long Nb3Sn Low-β Quadrupole Magnets for the Hi-Lumi LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-6, June 2020, Art no. 4000906. Link

 

Cocco, Daniele, et al. “Adaptive shape control of wavefront-preserving X-ray mirrors with active cooling and heating.” Optics express 28.13 (2020): 19242-19254. Link

 

G. Cutler et al. “An update on development of a cryogenically cooled-silicon mirror for the Advanced Light Source Upgrade project.” Advances in X-Ray/EUV Optics and Components XV. Vol. 11491. SPIE, 21 August 2020. Link

 

Cutler, Grant, et al. “A cantilevered liquid-nitrogen-cooled silicon mirror for the Advanced Light Source Upgrade.” Journal of synchrotron radiation 27.5 (2020): 1131-1140. Link

 

Fagrelius, Parker, et al. “Performance of the dark energy spectroscopic instrument (DESI) focal plane.” Ground-based and Airborne Instrumentation for Astronomy VIII. Vol. 11447. SPIE, 2020. Link

 

A. M. Meisner et al., “Performance of Kitt Peak’s Mayall 4-meter telescope during DESI commissioning,” in Ground-based and Airborne Instrumentation for Astronomy VIII, Dec. 2020, p. 399. Link

 

M. Noh,, et al., “Active Optical Mode Matching for the Quantum Squeezing Cavities and Upcoming LIGO Upgrades.” In Proceedings – 2020 ASPE Spring Topical Meeting: Design and Control of Precision Mechatronic Systems (pp. 110-112). (Proceedings – 2020 ASPE Spring Topical Meeting: Design and Control of Precision Mechatronic Systems). American Society for Precision Engineering, ASPE. Link

 

H. Pan et al., “Fracture Failure Analysis for MQXFA Magnet Aluminum Shells,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-7, June 2020, Art no. 4002307. Link

 

Poley, Luise, et al. “The ABC130 barrel module prototyping programme for the ATLAS strip tracker.” Journal of Instrumentation 15.09 (2020): P09004. Link

 

Sanchez Del Rio, Manuel, et al. “Compensation of heat load deformations using adaptive optics for the ALS upgrade: a wave optics study.” Journal of synchrotron radiation 27.5 (2020): 1141-1152. Link

 

Schwartz, Eyal, et al. “Improving the robustness of the advanced LIGO detectors to earthquakes.” Classical and Quantum Gravity 37.23 (2020): 235007. Link

 

W. Shourt et al., “Precision alignment and integration of DESI’s focal plane using a laser tracker,” in Ground-based and Airborne Telescopes VIII, Dec. 2020, p. 105. Link

 

Soni, S., et al. “Reducing scattered light in LIGO’s third observing run.” Classical and Quantum Gravity 38.2 (2020): 025016. Link

 

Swanson, Kelly, et al. “A Variable-Radius, Cryogenically-Formed, Gas-filled Capillary Discharge Waveguide.” APS Division of Plasma Physics Meeting Abstracts. Vol. 2020. 2020. Link

 

S. S. Tie et al., “The DESI sky continuum monitor system,” in Ground-based and Airborne Instrumentation for Astronomy VIII, Dec. 2020, p. 187. Link

 

Vallone, Giorgio, et al. “A methodology to compute the critical current limit in Nb3Sn magnets.” Superconductor Science and Technology 34.2 (2020): 025002. Link

 

A. Wojdyla et al. “Preliminary design of a set of four beamlines for the DLSR upgrade of the advanced light source.” Advances in Computational Methods for X-Ray Optics V. Vol. 11493. SPIE, 2020. Link

 

Yin, Shijian, James Swanson, and Tengming Shen. “Design of a high toughness epoxy for superconducting magnets and its key properties.” IEEE Transactions on Applied Superconductivity 30.4 (2020): 1-5. Link

 

Pan, Heng, et al. “Fracture failure analysis for MQXFA magnet aluminum shells.” IEEE Transactions on Applied Superconductivity 30.4 (2020): 1-7. Link

Engineering Division 2018 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

M. Aaboud, et al. “Search for flavor-changing neutral currents in top quark decays t→ H c and t→ H u in multilepton final states in proton-proton collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 98.3 (2018): 032002. Link
 

Aartsen, M. G., et al. “Search for neutrinos from decaying dark matter with IceCube.” The European Physical Journal C 78.10 (2018): 1-9. LInk

 

Aartsen, M. G., et al. “A search for neutrino emission from fast radio bursts with six years of IceCube data.” The Astrophysical Journal 857.2 (2018): 117. Link

 

Abbott, Brad, et al. “Production and integration of the ATLAS Insertable B-Layer.” Journal of instrumentation 13.05 (2018): T05008. Link

 

B. Abi et al., “The DUNE Far Detector Interim Design Report Volume 1: Physics, Technology and Strategies,” arXiv: 1807.10334, 26 Jul. 2018, Link

 

B. Abi et al., “The DUNE far detector interim design report, Volume 2: single-phase module,” PUBART, 26 Jul. 2018. Link

 

B. Abi et al., “The DUNE Far Detector Interim Design Report, Volume 3: Dual-Phase Module,” arXiv: 1807.10340, 26 Jul. 2018. Link

 

O. Agazzi et al., (2018). “High-speed receiver architecture,” U.S. Patent No. 9882648), U.S. Patent and Trademark Office. Link

 

J. Anderson, C. Campbell, M. Carpenter, J. Joseph, T. Stezelberger and S. Zimmermann, “Electronics Systems for the Gamma Ray Energy Tracking Nuclear Array (GRETA),” 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference Proceedings (NSS/MIC), 2018, pp. 1-4. Link

 

ATLAS Collaboration. “Angular analysis of B0d→K∗μ+μ− decays in pp collisions at s√=8 TeV with the ATLAS detector.” arXiv preprint arXiv:1805.04000 (2018). Link

 

ATLAS Collaboration. “Search for pair and single production of vectorlike quarks in final states with at least one Z boson decaying into a pair of electrons or muons in p p collision data collected with the ATLAS detector at s= 13 TeV.” Physical review D 98.11 (2018): 112010. Link

 

ATLAS Collaboration. “Search for chargino and neutralino production in final states with a Higgs boson and missing transverse momentum at √s=13  TeV with the ATLAS detector.” Phys. Rev. D 100.arXiv: 1812.09432 (2018): 012006. Link

 

ATLAS Collaboration. “Search for new phenomena in events with same-charge leptons and b-jets in pp collisions at s√=13 TeV with the ATLAS detector.” J. High Energ. Phys. 2018, 39 (2018). Link

 

ATLAS Collaboration. “Measurement of the Zγ→νν¯γ production cross section in pp collisions at s√ = 13 TeV with the ATLAS detector and limits on anomalous triple gauge-boson couplings.” arXiv preprint arXiv:1810.04995 (2018). Link

 

Aad, Georges, et al. “Measurement of the azimuthal anisotropy for charged particle production in s N N= 2.76 TeV lead-lead collisions with the ATLAS detector.” Physical Review C 86.1 (2012): 014907. Link

 

ATLAS Collaboration.”Combination of the searches for pair-produced vectorlike partners of the third-generation quarks at s= 13 TeV with the ATLAS detector.” Physical review letters 121.21 (2018): 211801. Link

 

ATLAS Collaboration. “Observation of Centrality-Dependent Acoplanarity for Muon Pairs Produced via Two-Photon Scattering in Pb+ Pb Collisions at s N N= 5.02 TeV with the ATLAS Detector.” Physical review letters 121.21 (2018): 212301. Link

 

ATLAS Collaboration. “Search for chargino-neutralino production using recursive jigsaw reconstruction in final states with two or three charged leptons in proton-proton collisions at s= 13 TeV with the ATLAS detector.” Physical review D 98.9 (2018): 092012. Link

 

ATLAS Collaboration. “Search for lepton-flavor-violating decays of the Z boson into a τ lepton and a light lepton with the ATLAS detector.” Physical review D 98.9 (2018): 092010. Link

 

ATLAS Collaboration. “Search for lepton-flavor violation in different-flavor, high-mass final states in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 98.9 (2018): 092008. Link

 

ATLAS Collaboration. “Constraints on off-shell Higgs boson production and the Higgs boson total width in ZZ→ 4ℓ and ZZ→ 2ℓ2ν final states with the ATLAS detector.” Physics Letters B 786 (2018): 223-244. Link

 

ATLAS Collaboration. “Observation of H→ bb decays and VH production with the ATLAS detector.” Physics Letters B 786 (2018): 59-86. Link

 

ATLAS Collaboration. “Searches for exclusive Higgs and Z boson decays into J/ψ γ, ψ (2S) γ, and ϒ (nS) γ at s= 13TeV with the ATLAS detector.” Physics Letters B 786 (2018): 134-155. Link

 

ATLAS Collaboration. “Search for pair production of heavy vectorlike quarks decaying into hadronic final states in p p collisions at s= 13 TeV with the ATLAS detector.” Physical review D 98.9 (2018): 092005. Link

 

ATLAS Collaboration.”Search for Resonant and Nonresonant Higgs Boson Pair Production in the b b¯ τ+ τ− Decay Channel in p p Collisions at s= 13 TeV with the ATLAS Detector.” Physical review letters 121.19 (2018): 191801. Link

 

ATLAS Collaboration. Search for Higgs boson pair production in the γγbb¯¯ final state with 13 TeV pp collision data collected by the ATLAS experiment. J. High Energ. Phys. 2018, 40 (2018). Link

 

ATLAS Collaboration. Search for charged Higgs bosons decaying into top and bottom quarks at s√=13 TeV with the ATLAS detector. J. High Energ. Phys. 2018, 85 (2018). Link

 

ATLAS Collaboration.”Measurement of the suppression and azimuthal anisotropy of muons from heavy-flavor decays in Pb+ Pb collisions at s N N= 2.76 TeV with the ATLAS detector.” Physical review C 98.4 (2018): 044905. Link

 

ATLAS Collaboration. “Probing the Quantum Interference between Singly and Doubly Resonant Top-Quark Production in p p Collisions at s= 13 TeV with the ATLAS Detector.” Physical review letters 121.15 (2018): 152002. Link

 

ATLAS Collaboration. “Search for the Higgs boson produced in association with a vector boson and decaying into two spin-zero particles in the H→aa→4b channel in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1806.07355 (2018). Link

 

ATLAS Collaboration. Search for dark matter in events with a hadronically decaying vector boson and missing transverse momentum in pp collisions at s√=13 TeV with the ATLAS detector. J. High Energ. Phys. 2018, 180 (2018). Link

 

ATLAS Collaboration. “Combination of searches for heavy resonances decaying into bosonic and leptonic final states using 36 fb−1 of proton-proton collision data at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1808.02380 (2018). Link

 

ATLAS Collaboration. Search for charged Higgs bosons decaying via H± → τ±ντ in the τ+jets and τ+lepton final states with 36 fb−1 of pp collision data recorded at s√=13 TeV with the ATLAS experiment. J. High Energ. Phys. 2018, 139 (2018). Link

 

ATLAS Collaboration. “Observation of Higgs boson production in association with a top quark pair at the LHC with the ATLAS detector.” Physics Letters B 784 (2018): 173-191. Link

 

ATLAS Collaboration. Prompt and non-prompt J/ψ elliptic flow in Pb+Pb collisions at sNN−−−√=5.02 Tev with the ATLAS detector . Eur. Phys. J. C 78, 784 (2018). Link

 

ATLAS Collaboration. “Search for resonances in the mass distribution of jet pairs with one or two jets identified as b-jets in proton-proton collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 98.3 (2018): 032016. Link

 

ATLAS Collaboration. “Search for squarks and gluinos in final states with hadronically decaying τ-leptons, jets, and missing transverse momentum using pp collisions at s√ = 13 TeV with the ATLAS detector.” arXiv preprint arXiv:1808.06358 (2018). Link

 

ATLAS Collaboration. “Measurement of jet fragmentation in Pb+Pb and pp collisions at sNN‾‾‾‾√=5.02 TeV with the ATLAS detector.” arXiv preprint arXiv:1805.05424 (2018). Link

 

ATLAS Collaboration. Measurements of b-jet tagging efficiency with the ATLAS detector using tt¯ events at s√=13 TeV. J. High Energ. Phys. 2018, 89 (2018). Link

 

ATLAS collaboration. “Search for pair production of heavy vector-like quarks decaying into high-pT W bosons and top quarks in the lepton-plus-jets final state in pp collisions at s√=13 TeV with the ATLAS detector” arXiv preprint arXiv:1806.01762 (2018). Link

 

ATLAS Collaboration.”Operation and performance of the ATLAS Tile Calorimeter in Run 1.” arXiv preprint arXiv:1806.02129 (2018). Link

 

Azevedo, C. D. R., et al. “Microscopic simulation of xenon-based optical TPCs in the presence of molecular additives.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 877 (2018): 157-172. Link

 

Bakalis, C. Front-end and back-end electronics for the ATLAS new small wheel upgrade. No. ATL-MUON-PROC-2018-015. ATL-COM-MUON-2018-058, 2018. Link

 

Chevtsov, Pavel, Miroslaw Dach, and Trivan Pal. “MATLAB Control Applications Embedded Into Epics Process Controllers (IOC) and their Impact on Facility Operations at Paul Scherrer Institute.” 16th Int. Conf. on Accelerator and Large Experimental Control Systems (ICALEPCS’17), Barcelona, Spain, 8-13 October 2017. JACOW, Geneva, Switzerland, 2018. Link

 

Cornell, Earl, et al. BCS (Beamline Control System) v2. No. BCS v2. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), (28 November 2018). Link

 

Kunz, Martin, et al. “Implementation and application of the peak scaling method for temperature measurement in the laser heated diamond anvil cell.” Review of Scientific Instruments 89.8 (2018): 083903. Link

 

Doolittle, L., et al. “Cascading RF deflectors in compact beam spreader schemes.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 899 (2018): 32-42. Link

 

Q. Du, Y. Song, C. Ji and Z. Ahmad, “High-resolution digital beamforming of UWB signals based on Carathéodory representation for delay compensation and array extrapolation,” in Journal of Systems Engineering and Electronics, vol. 29, no. 5, pp. 918-926, Oct. 2018. Link

 

Dwyer, Daniel A., et al. “LArPix: Demonstration of low-power 3D pixelated charge readout for liquid argon time projection chambers.” Journal of Instrumentation 13.10 ( 2 Oct. 2018): P10007. Link

 

Felkai, R., et al. “Helium–Xenon mixtures to improve the topological signature in high pressure gas xenon TPCs.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 905 (2018): 82-90. Link

 

J. M., Gates, et al. “First direct measurements of superheavy-element mass numbers.” Physical review letters 121.22 (November 2018): 222501. Link

 

C. Grace et al., “A 32-Channel ASIC for the Readout of Pixelated Liquid Argon Time Projection Chambers,” 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference Proceedings (NSS/MIC), 2018, pp. 1-3. Link

 

Hasan, A. Z. M. “Electrical Characterization of Graphene and Nanodiamond Nanostructures.” (2018). Link

 

Hasan, Nowzesh, et al. “Enhanced ionic sensitivity in solution‐gated graphene‐hexagonal boron nitride heterostructure field‐effect transistors.” Advanced Materials Technologies 3.8 (2018): 1800133. Link

 

Hellert, T., et al. “Status of the Conceptual Design of ALS-U.” (2018). Link

 

J. Holzbauer, et al., Active Microphonics Compensation for LCLS-II. United States: N. p., June 2018. Web. Link

 

Huang, Gang. LCLS-II gun/buncher LLRF system design. No. FERMILAB-CONF-18-604-AD. Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); SLAC National Accelerator Lab., Menlo Park, CA (United States), 1 June, 2018. Link

 

Hunziker, et al. “Ultra-Stable Fiber-Optic Reference Distribution for SwissFEL C-Band Linacs Based on S-Band Radio-Over-Fiber Links and Frequency Doubler/Power Amplifiers.” 6th Int. Beam Instrumentation Conf.(IBIC’17), Grand Rapids, MI, USA, 20-24 August 2017. JACOW, Geneva, Switzerland, 2018. Link

 

IceCube Collaboration, et al. “Neutrino emission from the direction of the blazar TXS 0506+ 056 prior to the IceCube-170922A alert.” Science 361.6398 (2018): 147-151. Link

 

IceCube Collaboration, et al. “Multimessenger observations of a flaring blazar coincident with high-energy neutrino IceCube-170922A.” Science 361.6398 (2018): eaat1378. Link

 

I.J. Johnson, et al. “A next generation electron microscopy detector aimed at enabling new scanning diffraction techniques and online data reconstruction.” Microscopy and Microanalysis 24.S1 (2018): 166-167. Link

 

L. Ke, J. Li, Q. Du and Z. Shen, “Study on the application of cardiac impedance and ECG in medical robot,” 2018 IEEE International Conference on Intelligence and Safety for Robotics (ISR), 2018, pp. 563-568. Link

 

L. Ke, X. Chen and Q. Du, “The Research of Single-Sample Face Recognition Based on Wavelet Image Fusion,” 2018 IEEE International Conference on Intelligence and Safety for Robotics (ISR), 2018, pp. 575-578. Link

 

Kneissl, Raphael, et al. “The Minidex experiment to measure muon-induced neutrons.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2018). Link

 

Lacey, Ian, et al. “The ALS OSMS: Optical Surface Measuring System for high accuracy two-dimensional slope metrology with state-of-the-art x-ray mirrors.” Advances in X-Ray/EUV Optics and Components XIII. Vol. 10760. International Society for Optics and Photonics, 17 September 2018. Link

 

K. Li, W. Y. Long, D. Qiang and X. J. Wei, “Design of multi – frequency constant current source based on intracellular and extracellular fluid capacity,” 2018 Chinese Control And Decision Conference (CCDC), 2018, pp. 5649-5653. Link

 

Lin, Z., et al. “Development of sub-100 femtosecond timing and synchronization system”, Review of Scientific Instruments 89, 014701 (2018). Link

 

S. Marconi et al., “Design implementation and test results of the RD53A, a 65 nm large scale chip for next generation pixel detectors at the HL-LHC,” 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference Proceedings (NSS/MIC), 2018, pp. 1-4. Link

 

Marini, Laura, et al. “Results from the CUORE experiment.” Proceedings of Science 332.1-4 (2018): 64-77, Link

 

Martínez-Lema, G., et al. “Calibration of the NEXT-White detector using 83mKr decays.” Journal of Instrumentation 13.10 (2018): P10014. Link

 

McDonald, A. D., et al. “Demonstration of single-barium-ion sensitivity for neutrinoless double-beta decay using single-molecule fluorescence imaging.” Physical review letters 120.13 (2018): 132504. Link

 

N. Mishra, et al. “A compact dual-band open-ended metamaterial antenna for microwave frequency applications.” 2018 3rd International Conference on Microwave and Photonics (ICMAP). IEEE, 2018. Link

 

Monrabal, F., et al. “The next white (new) detector.” Journal of Instrumentation 13.12 (2018): P12010. Link

 

Monteil, Ennio, et al. “RD53A: a large scale prototype for HL-LHC silicon pixel detector phase 2 upgrades.” Topical Workshop on Electronics for Particle Physics (TWEPP2018). Vol. 343. 2018. Link

 

Myslik, Jordan, et al. “Performance of the MAJORANA Low-Mass Front-End in liquid cryogen.” APS April Meeting Abstracts. Vol. 2018. 2018. Link

 

Novella, P., et al. “Measurement of radon-induced backgrounds in the NEXT double beta decay experiment.” Journal of High Energy Physics 2018.10 (2018): 1-27. Link

 

H. Pei et al., “High Energy Ultrafast Fiber Lasers Based on Coherent Pulse Stacking Amplification,” 2018 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), 2018, pp. 1-2. Link

 

Renner, J., et al. “Initial results on energy resolution of the NEXT-White detector.” Journal of Instrumentation 13.10 (2018): P10020. Link

 

Rimoldi, Marco, et al. “Combined measurement of differential and total cross sections in the H→ γγ and the H→ ZZ*→ 4ℓ decay channels at√ s= 13 TeV with the ATLAS detector.” Physics letters. B 786 (2018): 114-133. Link

 

Rogers, L., et al. “High voltage insulation and gas absorption of polymers in high pressure argon and xenon gases.” Journal of Instrumentation 13.10 (2018): P10002. Link

 

Serrano, Carlos et al. “RF Controls for High-Q Cavities for the LCLS-II.” (2018). Link

 

Shapiro, D.A., et al. “The COSMIC Imaging Beamline at the Advanced Light Source: a New Facility for Spectro-Microscopy of Nano-Materials.” Microscopy and Microanalysis, vol. 24, no. S2, 2018, pp. 8–11, Link

 

Simón, A., et al. “Electron drift properties in high pressure gaseous xenon.” Journal of Instrumentation 13.07 (2018): P07013. Link

 

Sirunyan, Albert M., et al. “Search for high-mass resonances in dilepton final states in proton-proton collisions at s = 13 TeV.” Journal of High Energy Physics 2018.6 (June 2018): 1-44. Link

 

Sirunyan, Albert M., et al. “Search for pair-produced resonances decaying to quark pairs in proton-proton collisions at s= 13 TeV.” Physical Review D 98.11 (28 Dec 2018): 112014. Link

 

Sirunyan, Albert M., et al. “Measurement of the single top quark and antiquark production cross sections in the t channel and their ratio in proton-proton collisions at s= 13TeV.” Physics Letters B 800 (2020): 135042. Link

 

Sirunyan, Albert M., et al. “Measurement of angular parameters from the decay B0→ K⁎ 0μ+ μ− in proton–proton collisions at s= 8TeV.” Physics Letters B 781 (2018): 517-541. Link

 

S. Tengming, et al. “Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the very high wire current density of more than 1000 A/mm2.” arXiv preprint arXiv:1808.02864 (2018). Link

 

M. Turqueti, et al., “Smart acoustic sensor array system for real-time sound processing applications.” Smart Sensors and Mems. Woodhead Publishing, 2018. 541-565. Link

 

M. Turqueti and J. Taylor, “Implementation and Cryogenic Operation of FPGA Based n-bit Analog to Digital Converter,” 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference Proceedings (NSS/MIC), 2018, pp. 1-2. Link

 

X. Wang, Y. Li, J. Xu, H. Yu, Q. Liu and Q. Du, “Experimental Study on Surface Roughness and Surface Micro-morphology of SiCp/Al,” 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2018, pp. 201-204. Link

 

Z. Wu et al., “Research of Photon Counting Dual-energy X-ray Absorptiometry Based on SiPM,” 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference Proceedings (NSS/MIC), 2018, pp. 1-4. Link

 

Xu, Y., et al., “Extracting cavity and pulse phases from limited data for coherent pulse stacking,” Chin. Opt. Lett. 16, 040701- (2018). Link

 

Xu, Yi., et al. “High-precision phase detection in femtosecond timing and synchronization system for TXGLS.” Measurement Science and Technology 29.6 (2018): 065011. Link

 

Y. Xu, Q. Du, M. Zhang, Q. Zhu and Y. He, “Soft-Sensing Development Using Adaptive PSO Optimization Based Multi-Kernel ELM with Error Feedback,” 2018 IEEE 7th Data Driven Control and Learning Systems Conference (DDCLS), 2018, pp. 431-435. Link

 

Y. Xu et al., “FPGA-Based Optical Cavity Phase Stabilization for Coherent Pulse Stacking,” in IEEE Journal of Quantum Electronics, vol. 54, no. 1, pp. 1-11, Feb. 2018, Art no. 1600111. Link

 

Xu, Y., et al. “Phase Extraction and Stabilization for Coherent Pulse Stacking.” (2018), Link

 

Yang, Yawei, et al. “FPGA Based Optical Phase Control for Coherent Laser Pulse Stacking.” (2018). Link

 

Yang, Yawei, et al. “Optical phase control of coherent pulse stacking via modulated impulse response.” JOSA B 35.9 (2018): 2081-2090. Link

 

Yang, Yawei, et al. “High Precision Synchronization Development for HiRES, the Ultrafast Electron Diffraction Beamline at LBNL.” 9th Int. Particle Accelerator Conf.(IPAC’18), Vancouver, BC, Canada, April 29-May 4, 2018. JACOW Publishing, Geneva, Switzerland, 2018. Link

 

Yang, Y., et al. “Cavity Phase Measurement via Modulated Impulse Response for Coherent Temporal Pulse Stacking.” 2018 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2018. Link

 

G. Ying, W. Zhenzhen, K. Li, D. Qiang and L. Jinghui, “Heart sound and ECG signal analysis and detection system based on LabVIEW,” 2018 Chinese Control And Decision Conference (CCDC), 2018, pp. 5569-5572. Link

 

Yu, Young-Sang, et al. “Three-dimensional localization of nanoscale battery reactions using soft X-ray tomography.” Nature communications 9.1 (2018): 1-7. Link

 

T. Zhou, Q. Du, T. Sano, R. Wilcox and W. Leemans, “Two-dimensional, eight-beam combination of ultrashort pulses using two diffractive optics,” 2018 Conference on Lasers and Electro-Optics (CLEO), 2018, pp. 1-2. Link

 

Zhou,T. et al., “Phase Control of Two-dimensional Diffractive Pulse Combination Based on Beam Array Detection,” in Laser Congress 2018 (ASSL), OSA Technical Digest (Optica Publishing Group, 2018), paper AM2A.6. Link

Magnetics Engineering Department

Arbelaez, D., et al. “Magnetic field correction methods for hybrid permanent magnet and superconducting undulators.” Synchrotron Radiation News 31.3 (2018): 9-13. Link
 

H. Bajas et al., “Test Result of the Short Models MQXFS3 and MQXFS5 for the HL-LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4007006. Link

 

Charles, T. K., et al. “The Compact Linear Collider (CLIC)-2018 Summary Report.” CERN Yellow Rep. Monogr. 1802 (2018): 1. Link

 

D. W. Cheng et al., “Fabrication and Assembly Performance of the First 4.2 m MQXFA Magnet and Mechanical Model for the Hi-Lumi LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-7, April 2018, Art no. 4006207. Link

 

H. Enquist et al., “FemtoMAX – an X-ray beamline for structural dynamics at the short-pulse facility of MAX IV,” Journal of Synchrotron Radiation, vol. 25, no. 2, pp. 570–579, Mar. 2018. Link.

 

L. Garcia Fajardo, L. Brouwer, S. Caspi, S. Gourlay, S. Prestemon and T. Shen, “Designs and Prospects of Bi-2212 Canted-Cosine-Theta Magnets to Increase the Magnetic Field of Accelerator Dipoles Beyond 15 T,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-5, June 2018, Art no. 4008305. Link

 

Lehti, S., et al. “arXiv: The Compact Linear Collider (CLIC)-2018 Summary Report.” CERN Yellow Rep. Monogr. 2.CERN-2018-005-M (2018). Link

 

Majkic, Goran, et al. “Engineering current density over 5 kA mm− 2 at 4.2 K, 14 T in thick film REBCO tapes.” Superconductor Science and Technology 31.10 (2018): 10LT01, Link

 

E. Ravaioli et al., “Quench Protection of a Nb3Sn Superconducting Magnet System for a 45-GHz ECR Ion Source,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4700906. Link.

 

R. Schlueter, “Undulators,” Synchrotron Radiation News, vol. 31, no. 3, pp. 2–3, May 2018. Link

 

Shen, Tengming, et al. “Hts magnet technology as path to fourth and fifth generation ecr ion sources.” 23th Int. Workshop on ECR Ion Sources (ECRIS’18), Catania, Italy. 2018. Link

 

C. Steier, et al. “Status of the conceptual design of ALS-U.” Proc. IPAC’18 (2018): 4134-4137. Link

 

E. Todesco et al., “Progress on HL-LHC Nb3Sn Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-9, June 2018, Art no. 4008809. Link

 

D. Tommasini et al., “Status of the 16 T Dipole Development Program for a Future Hadron Collider,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, April 2018, Art no. 4001305. Link

 

Wang, Xiaorong, et al. “A viable dipole magnet concept with REBCO CORC® wires and further development needs for high-field magnet applications.” Superconductor Science and Technology 31.4 (2018): 045007. Link

 

H. W. Zhao, et al., “Superconducting ECR ion source: From 24-28 GHz SECRAL to 45 GHz fourth generation ECR”, Review of Scientific Instruments 89, 052301 (2018). Link

 

L. Zhong et al., “Results from phase 1 of the HAYSTAC microwave cavity axion experiment,” Physical Review D. 97. (March 2018). Link

Manufacturing Engineering & CAD Department

D. Leitner, et al., “Dark energy spectroscopic instrument (DESI) fiber positioner production,” Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 1070669 (10 July 2018). Link
 

Neben, Derek, et al. “Plasma response to amplitude modulation of the microwave power on a 14 GHz electron cyclotron resonance ion source.” AIP Conference Proceedings. Vol. 2011. No. 1. AIP Publishing LLC, 2018. Link

 

C. Poppett, et al., “Design, production, and performance of the DESI front end fiber system,” Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 107027P (9 July 2018). Link

 

Schubnell, Michael, et al. “DESI fiber positioner testing and performance (Conference Presentation).” Advances in optical and mechanical technologies for telescopes and instrumentation III. Vol. 10706. SPIE, 2018. Link

 

Shen, Tengming, et al. “Hts magnet technology as path to fourth and fifth generation ecr ion sources.” 23th Int. Workshop on ECR Ion Sources (ECRIS’18), Catania, Italy. 2018. Link

 

Steier, Christoph, et al. “Status of the conceptual design of ALS-U.” 9th International Particle Accelerator Conference. 2018. Link

 

K. Zhang,et al., “Dark Energy Spectroscopic Instrument (DESI) fiber positioner thermal and wind disturbance test,” Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107064R (10 July 2018). Link

Mechanical Engineering Department

 

Abbott, Brad, et al. “Production and integration of the ATLAS Insertable B-Layer.” Journal of instrumentation 13.05 (16 May 2018): T05008. Link
 

N. Aggarwal, et al. “All-sky search for long-duration gravitational wave transients in the first Advanced LIGO observing run.” (2018). Link

 

N. Aggarwal, et al. “GW170814: A Three-Detector Observation of Gravitational Waves from a Binary Black Hole Coalescence.” (2018). Link

 

Allen, Lori, et al. “DESI installation: preparations and progress (Conference Presentation).” Ground-based and Airborne Telescopes VII. Vol. 10700. International Society for Optics and Photonics, 10 July 2018. Link

 

D.Androic, et al. “Precision measurement of the weak charge of the proton.” arXiv preprint arXiv:1905.08283 (9 May 2019). Link

 

Arbelaez, D., et al. “Magnetic field correction methods for hybrid permanent magnet and superconducting undulators.” Synchrotron Radiation News 31.3 (9 May 2018): 9-13. Link

 

H. Bajas et al., “Test Result of the Short Models MQXFS3 and MQXFS5 for the HL-LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4007006. Link

 

S. I. Bermudez et al., “Geometric Field Errors of Short Models for MQXF, the Nb3Sn Low-β Quadrupole for the High Luminosity LHC,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4006306. Link

 

S. Izquierdo Bermudez et al., “Overview of the Quench Heater Performance for MQXF, the Nb3Sn Low-β Quadrupole for the High Luminosity LHC,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-6, June 2018, Art no. 4008406. Link

 
Brooks, David, et al. “Fabrication of the DESI corrector lenses.” Proceedings of SPIE-The International Society for Optical Engineering. Vol. 10706. No. arXiv: 1807.09371; FERMILAB-CONF-18-339-CD. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2018. Link
 

Buice, Eric S. “Alignment and assembly principles.” Basics of precision engineering. CRC Press, 2018. 449-491. Link

 

D. W. Cheng et al., “Fabrication and Assembly Performance of the First 4.2 m MQXFA Magnet and Mechanical Model for the Hi-Lumi LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-7, April 2018, Art no. 4006207. Link

 

Chiuchiolo, Antonella, et al. “Strain measurements with fiber Bragg grating sensors in the short models of the HiLumi LHC low-beta quadrupole magnet MQXF.” IEEE Transactions on Applied Superconductivity 28.4 (June 2018): 1-5. Link

 

Contin, Giacomo, et al. “The STAR MAPS-based PiXeL detector.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 907 (1 Nov 2018): 60-80. Link

 

D. Corrigan et al., “A Low-Complexity Mosaicing Algorithm for Stock Assessment of Seabed-Burrowing Species,” in IEEE Journal of Oceanic Engineering, vol. 44, no. 2, pp. 386-400, April 2019. Link

 

Covo, M. Kireeff, et al. “The 88-Inch Cyclotron: A one-stop facility for electronics radiation and detector testing.” Measurement 127 (2018): 580-587. Link

 

F. Delmotte, et al. “Soft x-ray optical constants of sputtered chromium thin films with improved accuracy in the L and M absorption edge regions.” Journal of Applied Physics 124.3 (2018): 035107. Link

 

Duan, Yutong, et al. “DESI focal plate alignment.” Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III. Vol. 10706. International Society for Optics and Photonics, 2018. Link

 

Elmadih, Waiel,et al. “Environmental isolation.” Basics of precision engineering. CRC Press, 2018. 565-600. Link

 

Fagrelius, Parker, et al. “ProtoDESI: First on-sky technology demonstration for the Dark Energy Spectroscopic Instrument.” Publications of the Astronomical Society of the Pacific 130.984 (2018): 025005. Link

 

G. Gutierrez et al., “As-built new Mayall telescope top end for the DESI project,” Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 107027Y (10 July 2018); Link

 

Steier, Christoph, et al. “Status of the conceptual design of ALS-U.” Proc. IPAC’18 (2018): 4134-4137. Link

 

Jung, J., et al. “Design of Asymmetric Quadrupole Gradient Bending R&D Magnet for the Advanced Light Source Upgrade (ALS-U).” Proc. IPAC (2018). Link

 

Leitner, Daniela, et al. “Dark energy spectroscopic instrument (DESI) fiber positioner production.” Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III. Vol. 10706. International Society for Optics and Photonics, 2018. Link

 

P. Martini, et al. “Overview of the dark energy spectroscopic instrument.” Ground-based and Airborne Instrumentation for Astronomy VII. Vol. 10702. International Society for Optics and Photonics, 2018. Link

 

J.P. Martins, et al. “MicroTCA. 4 Integration at ESS: From the Front-End Electronics to the EPICS OPI.” 16th Int. Conf. on Accelerator and Large Experimental Control Systems (ICALEPCS’17), Barcelona, Spain, 8-13 October 2017. JACOW, Geneva, Switzerland, (1 January 2018). Link

 

T. N. Miller et al., “Broadband anti-reflection coating for the meter class Dark Energy Spectroscopic Instrument lenses,” in Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, Jul. 2018, p. 62. Link.

 

Qiao, Ruimin, et al. “Soft x-ray spectroscopy of high pressure liquid.” Review of Scientific Instruments 89.1 (2018): 013114. Link

 

J. Schmoll et al., “Design and production of the DESI fibre cables,” in Ground-based and Airborne Instrumentation for Astronomy VII, Jul. 2018, p. 279. Link.

 

Schubnell, Michael, et al. “DESI fiber positioner testing and performance (Conference Presentation).” Advances in optical and mechanical technologies for telescopes and instrumentation III. Vol. 10706. International Society for Optics and Photonics, 2018. Link

 

Silber, J et al., . 5,000 Robots Merge to Map the Universe in 3-D. United States: N. p., 2018. Web. Link

 

S. Stoynev et al., “Summary of Test Results of MQXFS1—The First Short Model 150 mm Aperture Nb3Sn Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, April 2018, Art no. 4001705, Link.

 

E. Todesco et al., “Progress on HL-LHC Nb3Sn Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-9, June 2018, Art no. 4008809. Link

 

J. Ferradas Troitino et al., “Applied Metrology in the Production of Superconducting Model Magnets for Particle Accelerators,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4002106. Link

 

L. Tyas et al., “Design and production of DESI slit assemblies,” in Ground-based and Airborne Instrumentation for Astronomy VII, Jul. 2018, p. 277. Link.

 

G. Vallone et al., “Mechanical Analysis of the Short Model Magnets for the Nb 3Sn Low-β Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4003106, Link.

 

G. Vallone et al., “Mechanical Design Analysis of MQXFB, the 7.2-m-Long Low- β Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, April 2018, Art no. 4003705. Link

G. Vallone, B. Bordini and P. Ferracin, “Computation of the Reversible Critical Current Degradation in Nb 3Sn Rutherford Cables for Particle Accelerator Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-6, June 2018, Art no. 4801506. Link

Engineering Division 2022 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

 

Aad, Georges, et al. “Measurements of jet observables sensitive to b-quark fragmentation in t¯ t events at the LHC with the ATLAS detector.” Physical Review D 106.3 (2022): 032008. Link
 

Aad, Georges, et al. “Observation of W W W Production in p p Collisions at s= 13 TeV with the ATLAS Detector.” Physical review letters 129.6 (2022): 061803. Link

 

Aad, Georges, et al. “Search for heavy particles in the b-tagged dijet mass distribution with additional b-tagged jets in proton-proton collisions at s= 13 TeV with the ATLAS experiment.” Physical Review D 105.1 (2022): 012001 Link

 

Aad, Georges, et al. Search for type-III seesaw heavy leptons in leptonic final states in pp collisions at s√=13TeV with the ATLAS detector. No. CERN-EP-2021-211. ATLAS-EXOT-2020-02-003, 2022. Link

 

Abareshi, B., et al. “Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument.” arXiv preprint arXiv:2205.10939 (2022). Link

 

Abbasi, R., et al. “First all-flavor search for transient neutrino emission using 3-years of IceCube DeepCore data.” Journal of Cosmology and Astroparticle Physics 2022.01 (2022): 027. Link.

 

Abbasi, R., et al. “Search for High-energy Neutrinos from Ultraluminous Infrared Galaxies with IceCube.” The Astrophysical Journal 926.1 (2022): 59.Link

 

Abgrall, N., et al. “The Majorana Demonstrator readout electronics system.” Journal of Instrumentation 17.05 (2022): T05003. Link

 

Abud, A. Abed, et al. “Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC.” Journal of Instrumentation 17.01 (2022): P01005. Link

 

Abud, A. Abed, et al. “Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora.” arXiv preprint arXiv:2206.14521 (2022). Link

 

Abud, A. Abed, et al. “Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC.” The European Physical Journal C 82.7 (2022): 1-29. Link

 

Abud, A. Abed, et al. “Separation of track-and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network.” arXiv preprint arXiv:2203.17053 (2022). Link

 

Abud, A. Abed, et al. “Snowmass Neutrino Frontier: DUNE Physics Summary.” arXiv preprint arXiv:2203.06100 (March 2022). Link

 

Abud, Adam Abed, et al. “DUNE Offline Computing Conceptual Design Report.” (2022). Link

 

Acosta-Jimenez, Antonio Jose, et al. “Acknowledgment to Reviewers of Journal of Low Power Electronics and Applications in 2021.” (2022) Link

 

Affolder, A., Apresyan, A., Worm, S., Albrow, M., Ally, D., Ambrose, D., … & Zurek, M. (2022). Solid State Detectors and Tracking for Snowmass. arXiv preprint arXiv:2209.03607. Link

 

Aharmim, B., Ahmad, Q. R., Ahmed, S. N., Allen, R. C., & Andersen, T. C. Determination of the νe and total B8 solar neutrino fluxes using Determination of the e and total B8 solar neutrino fluxes using the Sudbury Neutrino Observatory Phase I data set. Link.

 

A. Ahmmed, M. Paul, M. Pickering and A. Lambert, “An Edge Aware Motion Modeling Technique Leveraging on the Discrete Cosine Basis Oriented Motion Model and Frame Super Resolution,” 2022 Data Compression Conference (DCC), 2022, pp. 143-152.Link

 

Ambrosio, G., et al. “A Strategic Approach to Advance Magnet Technology for Next Generation Colliders.” arXiv preprint arXiv:2203.13985 (2022). Link

 

Lacey, Ian, et al. “The ALS interferometric microscope upgraded for measurements with large x-ray optics and optical assemblies.” Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series. Vol. 12240. 2022. Link

 

Androić, D., et al. “Determination of the Al 27 Neutron Distribution Radius from a Parity-Violating Electron Scattering Measurement.” Physical Review Letters 128.13 (1 April 2022): 132501. Link

 

Apadula, Nicole, et al. “Monolithic active pixel sensors on cmos technologies.” arXiv preprint arXiv:2203.07626 (2022). Link

 

D. Arbelaez et al., “Status of the Nb3Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory,” in IEEE Transactions on Applied Superconductivity, (8 March 2022). Link

 

Artuso, Marina, et al. “Enabling Capabilities for Infrastructure and Workforce in Electronics and ASICs.” arXiv preprint arXiv:2204.07285 (15 April 2022). Link

 

ATLAS Collaboration et al. “Measurement of the energy asymmetry in 𝑡𝑡¯𝑗 production at 13TeV with the ATLAS experiment and interpretation in the SMEFT framework.” The European Physical Journal C 82.4 (2022): 1-36. Link

 

ATLAS Collaboration. “A search for an unexpected asymmetry in the production of e+ μ− and e− μ+ pairs in proton–proton collisions recorded by the ATLAS detector at s= 13 TeV.” Physics Letters B (2022): 137106. Link

 

ATLAS Collaboration. “Direct constraint on the Higgs-charm coupling from a search for Higgs boson decays into charm quarks with the ATLAS detector.” Eur. Phys. J. C (2022). Link

 

ATLAS Collaboration. “Measurement of the c-jet mistagging efficiency in 𝑡𝑡¯ events using pp collision data at 𝑠√=13 TeV collected with the ATLAS detector.” (2022). Link

 

ATLAS Collaboration. “Measurement of the polarisation of single top quarks and antiquarks produced in the t-channel at s√=13 TeV and bounds on the tWb dipole operator from the ATLAS experiment.” arXiv preprint arXiv:2202.11382 (2022). Link

 

ATLAS Collaboration. “Measurements of differential cross-sections in top-quark pair events with a high transverse momentum top quark and limits on beyond the Standard Model contributions to top-quark pair production with the ATLAS detector at s√=13 TeV.” arXiv preprint arXiv:2202.12134 (2022). Link

 

ATLAS Collaboration. “Measurements of Higgs boson production cross-sections in the H→τ+τ− decay channel in pp collisions at s√=13TeV with the ATLAS detector.” arXiv preprint arXiv:2201.08269 (2022). Link

 

ATLAS Collaboration. “Measurements of the Higgs boson inclusive and differential fiducial cross-sections in the diphoton decay channel with pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2202.00487 (2022). Link

 

ATLAS collaboration. “Observation of electroweak production of two jets in association with an isolated photon and missing transverse momentum, and search for a Higgs boson decaying into invisible particles at 13 TeV with the ATLAS detector.” European Physical Journal C 82.2 (2022): 105. Link

 

ATLAS Collaboration. “Observation of WWW Production in pp Collisions at s√=13 TeV with the ATLAS Detector.” arXiv preprint arXiv:2201.13045 (2022). Link

 

ATLAS Collaboration. “Performance of the ATLAS Level-1 topological trigger in Run 2.” The European Physical Journal C 82.1 (2022): 1-26. Link

 

ATLAS Collaboration. “Search for events with a pair of displaced vertices from long-lived neutral particles decaying into hadronic jets in the ATLAS muon spectrometer in pp collisions at s√=13 TeV.” arXiv preprint arXiv:2203.00587 (2022). Link

 

ATLAS Collaboration. “Search for exotic decays of the Higgs boson into bb¯¯ and missing transverse momentum in pp collisions at s√= 13 TeV with the ATLAS detector.” Journal of High Energy Physics volume 2022.1 (2021). Link

 

ATLAS Collaboration. “Search for flavour-changing neutral-current interactions of a top quark and a gluon in pp collisions at 𝑠√=13 TeV with the ATLAS detector.” The European Physical Journal C 82.4 (2022): 1-35. Link

 

ATLAS Collaboration. “Search for Higgs boson decays into a pair of pseudoscalar particles in the b b μ μ final state with the ATLAS detector in p p collisions at s√=13TeV.” Physical Review D 105.1 (2022): 012006. Link

 

ATLAS Collaboration. “Search for Higgs bosons decaying into new spin-0 or spin-1 particles in four-lepton final states with the ATLAS detector with 139 fb−1 of pp collision data at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2022.3 (2022): 1-64. Link

 

ATLAS Collaboration. “Search for invisible Higgs-boson decays in events with vector-boson fusion signatures using 139 fb−1 of proton-proton data recorded by the ATLAS experiment.” arXiv preprint arXiv:2202.07953 (2022). Link

 

ATLAS Collaboration. “Search for long-lived charginos based on a disappearing-track signature using 136 fb−1 of pp collisions at s√ = 13 TeV with the ATLAS detector.” arXiv preprint arXiv:2201.02472 (2022). Link

 

ATLAS Collaboration. “Search for neutral long-lived particles in pp collisions at s√=13 TeV that decay into displaced hadronic jets in the ATLAS calorimeter.” arXiv preprint arXiv:2203.01009 (2022). Link

 

ATLAS Collaboration. “Search for type-III seesaw heavy leptons in p p collisions at 𝑠√= 8 TeV with the ATLAS detector.” Physical Review D 92.3 (2015): 032001. Link

 

ATLAS Collaboration. “Study of B+c→J/ψD+s and B+c→J/ψD∗+s decays in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2203.01808 (2022). Link

 

ATLAS Collaboration. “The ATLAS Inner Detector Trigger performance in pp collisions at 13 TeV during LHC Run 2.” arXiv preprint arXiv:2107.02485 (2021). Link

 

ATLAS Collaboration. “Two-particle Bose-Einstein correlations in pp collisions at s√= 0.9 and 7 TeV measured with the ATLAS detector.” arXiv preprint arXiv:1502.07947 (2015). Link

 

ATLAS Collaboration. “Two-particle Bose-Einstein correlations in pp collisions at s√=13 TeV measured with the ATLAS detector at the LHC.” arXiv preprint arXiv:2202.02218 (2022). Link

 

ATLAS Collaborationl. “Measurement of the energy response of the ATLAS calorimeter to charged pions from 𝑊±→𝜏±(→𝜋±𝜈𝜏)𝜈𝜏 events in Run 2 data.” The European Physical Journal C 82.3 (2022): 1-31. Link

 

G. Aad et al. “Determination of the parton distribution functions of the proton using diverse ATLAS data from pp collisions at 𝑠√=7, 8 and 13 TeV.” The European Physical Journal C 82.5 (2022): 1-70. Link

 

G. Aad et al. “Measurements of azimuthal anisotropies of jet production in Pb+ Pb collisions at s NN= 5.02 TeV with the ATLAS detector.” Physical Review C 105.6 (2022): 064903. Link

 

G. Aad et al. “Search for resonant pair production of Higgs bosons in the b b¯ b b¯ final state using p p collisions at 𝑠√= 13 TeV with the ATLAS detector.” Physical Review D 105.9 (2022): 092002. Link

 

G. Aad et al., “Measurement of the nuclear modification factor for muons from charm and bottom hadrons in Pb+ Pb collisions at 5.02 TeV with the ATLAS detector.” Physics Letters B 829 (2022): 137077. Link

 

G. Aad et al., “Search for associated production of a Z boson with an invisibly decaying Higgs boson or dark matter candidates at TeV with the ATLAS detector.” Physics Letters B 829 (2022): 137066. Link

 

G. Aad et al., Constraints on Higgs boson properties using 𝑊𝑊∗(→𝑒𝜈𝜇𝜈)𝑗𝑗 production in 36.1fb−1 of 𝑠√=13 TeV pp collisions with the ATLAS detector. Eur. Phys. J. C 82, 622 (2022). Link

 

G. Aad et al., Emulating the impact of additional proton–proton interactions in the ATLAS simulation by presampling sets of inelastic Monte Carlo events. Comput Softw Big Sci 6, 3 (2022). Link

 

Bakalis, Christos, et al. “The LCLS-II Gun & Buncher LLRF Controller Upgrade.” arXiv preprint arXiv:2210.04005 (2022). Link

 

Benedict, Braeden C., Mohammad Meraj Ghanbari, and Rikky Muller. “Phased array beamforming methods for powering biomedical ultrasonic implants.” arXiv preprint arXiv:2203.01493 (2022). Link

 

Bin, Jianhui, et al. “A new platform for ultra-high dose rate radiobiological research using the BELLA PW laser proton beamline.” Scientific reports 12.1 (2022): 1484. Link

 

Bohon, J., et al. “Use of diamond sensors for a high-flux, high-rate X-ray pass-through diagnostic.” Journal of Synchrotron Radiation 29.3 (2022). Link

 

Boxer, B., et al. “Studies in Pulse Shape Discrimination for an Optimized ASIC Design.” arXiv preprint arXiv:2209.13979 (2022). Link

 

Bruno, Giacomo, et al. “Search for strongly interacting massive particles generating trackless jets in proton–proton collisions at $\sqrt {s}= 13\,\text {TeV} $.” European Physical Journal C 82 (2022). Link

 

Butko, Anastasiia, et al. “A Customized FPGA-Based Control System for Superconducting Qubits.” Bulletin of the American Physical Society (2022). Link

 

Carini, G., Demarteau, M., Denes, P., Dragone, A., Fahim, F., Grace, C., … & Yi, B. (2022). Big Industry Engagement to Benefit HEP: Microelectronics Support from Large CAD Companies. arXiv preprint. Link

 

Chen, Miaomiao, et al. “Phase field simulation of microstructure evolution and process optimization during homogenization of additively manufactured Inconel 718 alloy.” Frontiers in Materials 9 (2022): 1043249. Link

 

CMS Collaboration. “A new calibration method for charm jet identification validated with proton-proton collision events at s√ = 13 TeV.” arXiv preprint arXiv:2111.03027 (17 March 2021). Link

 

CMS Collaboration. “Using Z boson events to study parton-medium interactions in PbPb collisions.” arXiv preprint arXiv:2103.04377 (23 March 2021). Link

 

Contreras-Martinez, C., et al. “LCLS-II and HE Cryomodule Microphonics at CMTF in Fermilab.” arXiv preprint arXiv:2208.06316 (2022). Link

 

Cravatta, Andrew, and et al. LCLS-II-HE Cryomodule Testing at Fermilab. United States: N. p., 2022. Link

 
Du, Q., Azar, A. S., & M’hamdi, M. (2022). Kinetic interface condition phase diagram for the rapid solidification of multi-component alloys with an application to additive manufacturing. Calphad, 76, 102365. Link
 

Du, Qiang, and Mohammed M’Hamdi. “Predicting kinetic interface condition for austenite to ferrite transformation by multi-component continuous growth model.” Calphad 77 (2022): 102423. Link

 

Du, Qiang, et al. “Digital Low-Level RF control system for Accumulator Ring at Advanced Light Source Upgrade Project.” arXiv preprint arXiv:2210.05095 (2022). Link

 

Qiang Du, Dan Wang, Tong Zhou, Antonio Gilardi, Mariam Kiran, Bashir Mohammed, Derun Li, and Russell Wilcox, “Experimental beam combining stabilization using machine learning trained while phases drift,” Opt. Express 30, 12639-12653 (2022) Link

 

Filippetto, Daniele, et al. “Feedback and control systems for future linear colliders: White Paper for Snowmass 2021 Topical Group AF07-RF.” arXiv preprint arXiv:2204.00701 (1 April 2022). Link

 

Geulig, Laura D., et al. “Online charge measurement for petawatt laser-driven ion acceleration.” Review of Scientific Instruments 93.10 (2022): 103301. Link

 

C. Grace et al., “ColdADC_P2: A 16-Channel Cryogenic ADC ASIC for the Deep Underground Neutrino Experiment,” in IEEE Transactions on Nuclear Science, vol. 69, no. 1, pp. 105-112, (Jan. 2022). Link

 

Greenberg, Jacob K., et al. “Current and future applications of mobile health technology for evaluating spine surgery patients: a review.” Journal of Neurosurgery: Spine 1.aop (2023): 1-10. Link

 

Hakimi, Sahel, et al. “Laser–solid interaction studies enabled by the new capabilities of the iP2 BELLA PW beamline.” Physics of Plasmas 29.8 (2022): 083102. Link

 
Hasan, Nowzesh, et al. “Ion-Selective Membrane-Coated Graphene–Hexagonal Boron Nitride Heterostructures for Field-Effect Ion Sensing.” ACS omega 6.45 (2021): 30281-30291. Link
 

Henriques, C. A. O., Amedo, P., Teixeira, J. M. R., Gonzalez-Diaz, D., Azevedo, C. D. R., Para, A., … & Yahlali, N. (2022). Neutral bremsstrahlung emission in xenon unveiled. arXiv preprint arXiv:2202.02614. Link.

 

Herrero-Gómez, P., Calupitan, J. P., Ilyn, M., Berdonces-Layunta, A., Wang, T., de Oteyza, D. G., … & Yahlali, N. (2022). Ba2+ ion trapping by organic submonolayer: towards an ultra-low background neutrinoless double beta decay detector. arXiv preprint arXiv:2201.09099. Link.

 

Johnson, J., et al. “A Highly Programmable SiPM Readout ASIC for Neutron Imaging Applications.” (2022). Link

 

Johnson, J., et al. “A highly tunable ASIC prototype for reading out scintillators and providing pulse shape discrimination in real time.” Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XXIV. SPIE, 2022. Link

 

Kiani, Leily, et al. “High average power ultrafast laser technologies for driving future advanced accelerators.” arXiv preprint arXiv:2204.10774 (2022). Link

 
Lacey, Ian, et al. “Transfer of autocollimator calibration for use with scanning gantry profilometers for accurate determination of surface slope and curvature of state-of-the-art x-ray mirrors.” Advances in Metrology for X-Ray and EUV Optics VIII. Vol. 11109. SPIE, 2019. Link
 

Marchevsky, M., et al. “Advancing Superconducting Magnet Diagnostics for Future Colliders.” arXiv preprint arXiv:2203.08869 (16 March 2022). Link

 

Menon, Alisha, et al. “On the role of hyperdimensional computing for behavioral prioritization in reactive robot navigation tasks.” 2022 International Conference on Robotics and Automation (ICRA). IEEE, 2022. Link

 

Mironova, M., and RD53 collaboration. “Measurements of the radiation damage to the ITkPixV1 chip in X-ray irradiations.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 1039 (2022): 166947. Link

 

Dharanesh Murthy, Shreeharshini, Lawrence Doolittle, and Andrew Benwell. “Analog Cavity Emulators to Support LLRF Development.” arXiv e-prints (2022): arXiv-2210. Link

 

Murthy, Shreeharshini Dharanesh, et al. “Installation, Commissioning and Performance of Phase Reference Line for LCLS-II.” arXiv preprint arXiv:2210.05441 (2022). Link

 

NG, L. W., Lee, S. W., Chang, D. W., Hodgkiss, J. M., & Vak, D. (2022). Organic Photovoltaics’ New Renaissance: Advances Toward Roll-to-Roll Manufacturing of Non-Fullerene Acceptor Organic Photovoltaics. Advanced Materials Technologies, 2101556. Link.

 

Novella, P., et al. “Measurement of the Xe 136 two-neutrino double-β-decay half-life via direct background subtraction in NEXT.” Physical Review C 105.5 (2022): 055501. Link

 

Huang, Roger G., et al. “Cryogenic Calorimetric Signal Readout with 180nm CMOS at 20 mK.” 2022 IEEE 15th Workshop on Low Temperature Electronics (WOLTE). IEEE, 2022. Link

 

Papadopoulou, Aikaterini, et al. “A 512-Channel Neural Signal Acquisition ASIC for High-Density Electrophysiology.” 2022 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2022. Link

 

Papadopoulou, Aikaterini, et al. “A Modular 512 Channel Neural Signal Acquisition ASIC for High Density 4096 Channel Electrophysiology.” (2022). Link

 

Posen, S., et al. “High gradient performance and quench behavior of a verification cryomodule for a high energy continuous wave linear accelerator.” Physical Review Accelerators and Beams 25.4 (2022): 042001. Link

 

Prakash, Tarun, Raghvendra Kumar Chaudhary, and Ravi Kumar Gangwar. “A reconfigurable active microstrip antenna for agile switching: Pattern, beamwidth, and multibeam.” AEU-International Journal of Electronics and Communications 149 (May 2022): 154181. Link

 

S. Rochester, et al. “Towards super-resolution interference microscopy metrology of x-ray variable-line-spacing diffraction gratings: recent developments.” Proc. of SPIE Vol. Vol. 12240. 2022. Link

 

Shen, Tengming, et al. “Design, fabrication, and characterization of a high-field high-temperature superconducting Bi-2212 accelerator dipole magnet.” Physical Review Accelerators and Beams 25.12 (2022): 122401. Link

 

Silber, Joseph Harry, et al. “The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI).” arXiv preprint arXiv:2205.09014 (2022). Link

 

Sirunyan, A. M., et al. “Erratum to: Search for heavy Higgs bosons decaying to a top quark pair in proton-proton collisions at s \sqrt {s} \= 13 TeV.” Journal of High Energy Physics 2022.3 (2022): 1-21. Link

 

Sirunyan, A. M., et al. “Erratum to: Search for new physics in dijet angular distributions using proton-proton collisions at √s= 13 TeV and constraints on dark matter and other models.” The European Physical Journal C 82.4 (2022): 379. Link

 

Sirunyan, Albert M., et al. “Evidence for X (3872) in Pb-Pb Collisions and Studies of its Prompt Production at s N N= 5.02 TeV.” Physical review letters 128.3 (2022): 032001. Link

 

Sirunyan, Albert M., et al. “Using Z boson events to study parton-medium interactions in Pb-Pb collisions.” Physical review letters 128.12 (2022): 122301. Link

 

Kai Tang, Casper van der Eijk, Sylvain Gouttebroze, Qiang Du, Jafar Safarian, Gabriella Tranell,” Rheological properties of Al2O3–CaO–SiO2 slags”,Calphad,Volume 77,2022,102421,
ISSN 0364-5916. Link

 

Tang, Kai, et al. “Rheological properties of Al2O3–CaO–SiO2 slags.” Calphad 77 (2022): 102421. Link

 

CMS Collaboration. “Measurement of double-parton scattering in inclusive production of four jets with low transverse momentum in proton-proton collisions at √s= 13 TeV.” arXiv preprint arXiv:2109.13822 (Jan. 2021). Link

 

CMS Collaboration. “Measurement of the inclusive and differential WZ production cross sections, polarization angles, and triple gauge couplings in pp collisions at√ 𝑠= 13 TeV,(2021).” arXiv preprint arXiv:2110.11231. Link

 

CMS Collaboration. “Precision measurement of the W boson decay branching fractions in proton-proton collisions at √s= 13 TeV.” arXiv preprint arXiv:2201.07861 (19 Jan. 2022). Link

 

Sirunyan, Albert M., et al. “Measurements of the associated production of a W boson and a charm quark in proton–proton collisions at 𝑠√=8TeV.” The European Physical Journal C 79.3 (2019): 1-31. Link

 

Tumasyan, A., et al. “Observation of Bs0 mesons and measurement of the Bs0/B+ yield ratio in PbPb collisions at TeV.” Physics Letters B (2022): 137062. Link

 

Tumasyan, A., et al. “Search for heavy resonances decaying to W W, W Z, or W H boson pairs in a final state consisting of a lepton and a large-radius jet in proton-proton collisions at s= 13 TeV.” Physical Review D 105.3 (2022): 032008. Link

 

Tumasyan, A., et al. “Search for heavy resonances decaying to W W, W Z, or W H boson pairs in a final state consisting of a lepton and a large-radius jet in proton-proton collisions at s= 13 TeV.” Physical Review D 105.3 (25 Feb. 2022): 032008. Link

 

Tumasyan, A., et al. “Search for heavy resonances decaying to Z (ν ν ¯) V (qq ¯ â ²) in proton-proton collisions at s= 13 TeV.” Physical Review D 106.1 (2022). Link

 

Tumasyan, Armen, and et al. Search for new physics in the lepton plus missing transverse momentum final state in proton-proton collisions at √s= 13 TeV. United States: N. p., 2 Feb. 2022. Link

 

Tumasyan, Armen, et al. “First Search for Exclusive Diphoton Production at High Mass with Tagged Protons in Proton-Proton Collisions at s= 13 TeV.” Physical review letters 129.1 (2022): 011801. Link

 

Tumasyan, Armen, et al. “Fragmentation of jets containing a prompt J/ψ meson in PbPb and pp collisions at sNN= 5.02 TeV.” Physics Letters B 825 (10 Feb. 2022): 136842. Link

 

Tumasyan, Armen, et al. “Fragmentation of jets containing a prompt J/ψ meson in PbPb and pp collisions at sNN= 5.02 TeV.” Physics Letters B 825 (2022): 136842. Link

 

Tumasyan, Armen, et al. “Measurement of W±γ differential cross sections in proton-proton collisions at s= 13 TeV and effective field theory constraints.” Physical Review D 105.5 (2022): 052003. Link

 

Tumasyan, Armen, et al. “Precision measurement of the W boson decay branching fractions in proton-proton collisions at √s= 13 TeV.” Physical Review D 105.7 (2022): 072008. Link

 

Tumasyan, Armen, et al. “Probing Charm Quark Dynamics via Multiparticle Correlations in Pb-Pb Collisions at √sNN= 5.02 TeV.” Physical review letters 129.2 (2022): 022001. Link

 

Tumasyan, Armen, et al. “Probing Charm Quark Dynamics via Multiparticle Correlations in Pb-Pb Collisions at s NN= 5.02 TeV.” Physical review letters 129.2 (2022): 022001. Link

 

Tumasyan, Armen, et al. “Search for electroweak production of charginos and neutralinos in proton-proton collisions at s TeV.” Journal of High Energy Physics 2022.4 (2022): 1-73. Link

 

Tumasyan, Armen, et al. “Search for resonances decaying to three W bosons in the hadronic final state in proton-proton collisions at s= 13 TeV.” Physical Review D 106.1 (2022): 012002. Link

 

Tumasyan, Armen, et al. “Search for single production of a vector-like T quark decaying to a top quark and a Z boson in the final state with jets and missing transverse momentum at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2022.5 (2022): 1-49. Link

 

Tumasyan, Armen, et al. “Search for supersymmetry in final states with two or three soft leptons and missing transverse momentum in proton-proton collisions at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2022.4 (14 April 2022): 1-58. Link

 

Tumasyan, Armen, et al. “Search for Wγ resonances in proton-proton collisions at √s= 13 TeV using hadronic decays of Lorentz-boosted W bosons.” Physics Letters B (10 Jan. 2022): 136888. Link

 

Tumasyan, Armen, et al. “Search for Wγ resonances in proton-proton collisions at s= 13 TeV using hadronic decays of Lorentz-boosted W bosons.” Physics Letters B 826 (2022): 136888. Link

 

Tumasyan, Armen, et al. “Study of dijet events with large rapidity separation in proton-proton collisions at s 2.76 TeV.” Journal of High Energy Physics 2022.3 (2022): 1-46. Link

 

Tumasyan, Armen, et al. “Study of dijet events with large rapidity separation in proton-proton collisions at 𝑠√ = 2.76 TeV.” Journal of High Energy Physics 2022.3 (2022): 1-46. Link

 

Tumasyan, Armen, et al. “Study of quark and gluon jet substructure in Z+ jet and dijet events from pp collisions.” Journal of High Energy Physics 2022.1 (Jan. 2022): 1-54. Link

 

Tumasyan, Armen, et al. Nuclear modification of Υstates in pPb collisions at sNN‾‾‾‾√ = 5.02 TeV. CERN-EP-2020-181. 2022. Link

 

Tumasyan, Armen, et al. Search for resonances decaying to three W bosons in proton-proton collisions at √s= 13 TeV. No. arXiv: 2201.08476. 21 Jan. 2022. Link

 

Vytla, V. K., & Doolittle, L. (2023). Newad: A register map automation tool for Verilog. arXiv preprint arXiv:2305.09657. Link

 

Wang, Dan, et al. “Machine Learning Pattern Recognition Algorithm With Applications to Coherent Laser Combination.” IEEE Journal of Quantum Electronics 58.6 (2022): 1-9. Link

 

Wang, Xiaorong, et al. “An initial magnet experiment using high-temperature superconducting STAR® wires.” Superconductor Science and Technology (2022). Link

 

Whittlesey, Mathew, et al. “Simultaneous coherent pulse stacking amplification and spatial combining of ultrashort pulses at multi-mJ energies.” Fiber Lasers XIX: Technology and Systems. SPIE, 4 March 2022. Link

 

Wilcox, Russell, et al. “Diffractive combining and control of femtosecond pulse beam arrays.” Fiber Lasers XIX: Technology and Systems. Vol. 11981. SPIE, 2022. Link

 

Magnetics Engineering Department

 

Adolphsen, C., et al. “European Strategy for Particle Physics–Accelerator R&D Roadmap.” arXiv preprint arXiv:2201.07895 (2022). Link

 

Ambrosio, G., et al. “A Strategic Approach to Advance Magnet Technology for Next Generation Colliders.” arXiv preprint arXiv:2203.13985 (26 March 2022). Link

 

Ambrosio, G., et al. “White Paper on Leading-Edge technology And Feasibility-directed (LEAF) Program aimed at readiness demonstration for Energy Frontier Circular Colliders by the next decade.” arXiv preprint arXiv:2203.07654 (2022). Link

 

Ambrosio, G., et al. Enigineering Specification MQXFA Magnet Interface Specification. No. FERMILAB-TM-2801-TD. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Brookhaven National Lab.(BNL), Upton, NY (United States); Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2023. Link

 

Ambrosio, Giorgio, et al. “Development and demonstration of next generation technology for Nb_3Sn accelerator magnets with lower cost, improved performance uniformity, and higher operating point in the 12-14 T range.” arXiv preprint arXiv:2203.07352 (2022). Link

 

Ambrosio, Giorgio, et al. “Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC.” IEEE Transactions on Applied Superconductivity 33.5 (2023): 1-8. Link

 

Amm, K., et al. “The US Magnet Development Program-Preparing for the Next Generation Colliders.” LOI: Snowmass21-AF4-AF7-187. Link

 

D. Arbelaez et al., “Status of the Nb3Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-7, Sept. 2022, Art no. 4003207. Link

 

L. Brouwer, et al. “Stabilization and control of persistent current magnets using variable inductance.” Superconductor Science and Technology 35.4 (2022): 045011. Link

 

L. Brouwer, M. Juchno, D. Arbelaez, P. Ferracin and G. Vallone, “Design of CCT6: A Large Aperture, Nb3Sn Dipole Magnet for HTS Insert Testing,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-5, Sept. 2022, Art no. 4001805. Link

 

Cheng, D. W., et al. “The challenges and solutions of meeting the assembly specifications for the 4.5 m long MQXFA magnets for the Hi-Luminosity LHC.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fajardo, L. Garcia, et al. “Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi L Link

 

Fajardo, L. Garcia, et al. “Electromechanical analysis for the integration of a Nb 3 Sn and a Bi-2212 CCT dipole magnet for a hybrid magnet test.” IEEE Transactions on Applied Superconductivity (2023). Link

 

Fernández, JL Rudeiros, et al. “Assembly and mechanical analysis of the canted-cosine-theta subscale magnets.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5.Link

 

Ferracin, P., et al. “Assembly and Pre-Loading Specifications for the Series Production of the Nb 3 Sn MQXFA Quadrupole Magnets for the HL-LHC.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-6. Link

 

P. Ferracin et al., “Towards 20 T Hybrid Accelerator Dipole Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-6, Sept. 2022, Art no. 4000906. Link

 

Ferracin, Paolo, et al. “MQXFA series magnet production specification.” arXiv preprint arXiv:2302.01291 (2023).. Link

 

Hosoyama, K., and Japan S. Prestemon. “FRIB COMMISSIONING AND EARLY OPERATIONS.” Link

 

Juchno, M., et al. “Shell-based support structure for the 45 GHz ECR Ion Source MARS-D.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Lee, Geon Seok, et al. “Time-Frequency-Based Quench Detection for HTS VIPER Cable Using Torsional Acoustic Wave.” IEEE Sensors Journal (2022). Link

 

Ray, K. L., Ambrosio, G., Cheng, D. W., Ferracin, P., Prestemon, S., & Solis, M. J. (2023). Applied Metrology for the Assembly of the Nb 3 Sn MQXFA Quadrupole Magnets for the HL-LHC AUP. IEEE Transactions on Applied Superconductivity, 33(5), 1-6. Link

 

Ren, Haitao, et al. “Development and status of the FRIB 28 GHz SC ECRIS.” Journal of Physics: Conference Series. Vol. 2244. No. 1. IOP Publishing, 2022. Link

 

E. Rochepault et al., “3D Conceptual Design of R2D2, the Research Racetrack Dipole Demonstrator,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-5, Sept. 2022, Art no. 4004605. Link

 

J. L. R. Fernández et al., “Mechanical and Thermal Analysis of an HTS Superconducting Magnet for an Achromatic Gantry for Proton Therapy,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-5, Sept. 2022, Art no. 4401805. Link

 

Shen, Tengming, et al. “Design, fabrication, and characterization of a high-field high-temperature superconducting Bi-2212 accelerator dipole magnet.” Physical Review Accelerators and Beams 25.12 (2022): 122401. Link

 

Teyber, Reed, et al. “Numerical investigation of current distributions around defects in high temperature superconducting CORC® cables.” Superconductor Science and Technology 35.9 (2022): 094008. Link

 

Todesco, E., Bermudez, S. I., Foussat, A., Gautheron, E., Kirby, G., Felice, H., … & Cooley, L. (2023). Status and challenges of the interaction region magnets for HL-LHC. IEEE Transactions on Applied Superconductivity. Link

 

Troitino, J. Ferradas, et al. “Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets.” Superconductor Science and Technology 36.6 (2023): 065002. Link

 

Védrine, Pierre, et al. “High Field Magnet Development for HEP in Europe: A Proposal from LDG HFM Expert Panel.” arXiv preprint arXiv:2203.08054 (2022). Link

 

Wang, Jian, et al. “Effect Analyses of Thermal Deformation on Magnetic Performance of the CPMU Prototype in SSRF.” IOP Conference Series: Materials Science and Engineering. Vol. 1240. No. 1. IOP Publishing, 2022. Link

 

Wang, X., et al. “Field Quality of the 4.5-m-Long MQXFA Pre-Series Magnets for the HL-LHC Upgrade as Observed During Magnet Assembly.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Wei, J., et al. “Accelerator commissioning and rare isotope identification at the Facility for Rare Isotope Beams.” Modern Physics Letters A 37.09 (2022): 2230006. Link

 

Ambrosio, Giorgio, et al. “MQXFA final design report.” arXiv preprint arXiv:2203.06723 (2022). Link

 

E. Takala et al., “Preload Characterization of Short Models of MQXF the Nb3Sn Low-β Quadrupole for the Hi-Lumi LHC,” in IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, pp. 1-6, June 2020, Art no. 4002806. Link

 

Védrine, P., et al. “High-field magnets.” CERN Yellow Reports: Monographs 1 (2022): 9-9. Link

 

X. Wang et al., “Field quality of the 4.5 m-long MQXFA pre-series magnets for the HL-LHC Upgrade as observed during magnet assembly,” in IEEE Transactions on Applied Superconductivity. Link

 

Manufacturing Engineering and CAD Department

Ambrosio, G., Amm, K., Anerella, M., Apollinari, G., Izquierdo, G. A., Baldini, M., … & Yu, M. (2023). Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC. IEEE Transactions on Applied Superconductivity, 33(5), 1-8. Link
 

Dhall, R., Elowson, M., Schwartzberg, A., Alam, S., Chang, S., Tommasini, V., . . . Aloni, S. (2022). Ultra-Transparent Atomic Layer Deposition Membranes for Liquid Cell TEM. Microscopy and Microanalysis, 28(S1), 1824-1826. Link

 

Ferracin, P., Ambrosio, G., Apollinari, G., Blowers, J., Carcagno, R., Cheng, D., … & Vallone, G. (2023). MQXFA series magnet production specification. arXiv preprint arXiv:2302.01291. Link

 

Rezaie, M., Ross, A. J., Seo, H. J., Kong, H., Porredon, A., Samushia, L., … & Zou, H. (2023). Local primordial non-Gaussianity from the large-scale clustering of photometric DESI luminous red galaxies. arXiv preprint arXiv:2307.01753. Link

 

Ray, K. L., Ambrosio, G., Cheng, D. W., Ferracin, P., Prestemon, S., & Solis, M. J. (2023). Applied Metrology for the Assembly of the Nb 3 Sn MQXFA Quadrupole Magnets for the HL-LHC AUP. IEEE Transactions on Applied Superconductivity, 33(5), 1-6. Link

 

Silber, Joseph Harry, et al. “The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI).” arXiv preprint arXiv:2205.09014 (2022). Link

 

X. Wang et al., “Field quality of the 4.5 m-long MQXFA pre-series magnets for the HL-LHC Upgrade as observed during magnet assembly,” in IEEE Transactions on Applied Superconductivity, 2022. Link

 

Wei, J., et al. “Accelerator commissioning and rare isotope identification at the Facility for Rare Isotope Beams.” Modern Physics Letters A (2022): 2230006. Link

 

Mechanical Engineering Department

Abazajian, Kevork, et al. “Snowmass 2021 CMB-S4 White Paper.” arXiv preprint arXiv:2203.08024 (2022). Link
 

Abbott, R., et al. “All-sky search for continuous gravitational waves from isolated neutron stars using Advanced LIGO and Advanced Virgo O3 data.” arXiv preprint arXiv:2201.00697 (2022). Link

 

Abbott, R., et al. “All-sky search for gravitational wave emission from scalar boson clouds around spinning black holes in LIGO O3 data.” Physical Review D 105.10 (2022): 102001. Link

 

Abbott, R., et al. “All-sky, all-frequency directional search for persistent gravitational waves from Advanced LIGO’s and Advanced Virgo’s first three observing runs.” Physical Review D 105.12 (2022): 122001. Link

 

Abbott, R., et al. “Constraints on dark photon dark matter using data from LIGO’s and Virgo’s third observing run.” Physical review D 105.6 (2022): 063030. Link

 

Abbott, R., et al. “Search for continuous gravitational wave emission from the Milky Way center in O3 LIGO–Virgo data.” arXiv preprint arXiv:2204.04523 (2022). Link

 

Abbott, R., et al. “Search for continuous gravitational waves from 20 accreting millisecond x-ray pulsars in O3 LIGO data.” Physical Review D 105.2 (2022): 022002. Link

 

Abbott, R., et al. “Search for continuous gravitational waves from 20 accreting millisecond x-ray pulsars in O3 LIGO data.” Physical Review D 105.2 (2022): 022002. Link

 

Abbott, R., et al. “Search for Gravitational Waves Associated with Fast Radio Bursts Detected by CHIME/FRB During the LIGO–Virgo Observing Run O3a.” arXiv preprint arXiv:2203.12038 (2022). Link

 

Abbott, R., et al. “Search for gravitational waves from Scorpius X-1 with a hidden Markov model in O3 LIGO data.” arXiv preprint arXiv:2201.10104 (2022). Link

 

Abbott, R., et al. “Search for gravitational-wave transients associated with magnetar bursts in Advanced LIGO and Advanced Virgo data from the third observing run.” arXiv preprint arXiv:2210.10931 (2022). Link

 

Abbott, R., et al. “Search for Subsolar-Mass Binaries in the First Half of Advanced LIGO’s and Advanced Virgo’s Third Observing Run.” Physical review letters 129.6 (2022): 061104. Link

 

Abbott, R., et al. “Search of the early O3 LIGO data for continuous gravitational waves from the Cassiopeia A and Vela Jr. supernova remnants.” Physical Review D 105.8 (2022): 082005. Link

 

Abbott, R., et al. “Searches for gravitational waves from known pulsars at two harmonics in the second and third LIGO-Virgo observing runs.” (2022). Link

 

Abbott, R., et al. “The population of merging compact binaries inferred using gravitational waves through GWTC-3.” arXiv preprint arXiv:2111.03634 (2022). Link

 

Abbott, R., et al. “The population of merging compact binaries inferred using gravitational waves through GWTC-3.” arXiv preprint arXiv:2111.03634 (2022). Link

 

Abbott, Rich, et al. “Search for intermediate-mass black hole binaries in the third observing run of Advanced LIGO and Advanced Virgo.” Astronomy & Astrophysics 659 (2022): A84. Link

 

Abud, A. Abed, et al. “Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment.” Physical Review D 105.7 (2022): 072006. Link

 

Abed Abud, A., et al. “Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora.” arXiv e-prints (2022): arXiv-2206. Link

 

Abud, A. Abed, et al. “Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC.” Journal of Instrumentation 17.1 (2022). Link

 

Abud, A. Abed, et al. “Highly-parallelized simulation of a pixelated LArTPC on a GPU.” Journal of Instrumentation 18.04 (2023): P04034. Link

 

Abud, A. Abed, et al. “Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector.” arXiv preprint arXiv:2211.01166 (2022). Link

 

Abud, A. Abed, et al. arXiv: A Gaseous Argon-Based Near Detector to Enhance the Physics Capabilities of DUNE. No. FERMILAB-FN-1169-ND. 2022. Link

 

A.Allezy, et al.,2020, “How we are making the 0.5-NA Berkeley micro-field exposure tool stable and productive, SPIE Advanced Lithography Proceedings Volume 11323, Extreme Ultraviolet (EUV) Lithography XI. Link

 

Ambrosio, G., et al. “US HL-LHC Accelerator Upgrade Project.” (2022). Link

 

Ambrosio, G., et al. arXiv: A Strategic Approach to Advance Magnet Technology for Next Generation Colliders. No. arXiv: 2203.13985. 2022. Link

 

Ambrosio, Giorgio, et al. “MQXFA final design report.” arXiv preprint arXiv:2203.06723 (2022). Link

 

Arbelaez, Diego, et al. “Status of the Nb3Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-7. Link

 

Baldini, Maria, et al. “Fiber-optic diagnostic system for future accelerator magnets.” arXiv preprint arXiv:2203.08309 (15 March 2022). Link

 

Bale, Jacob B., et al. “Accurate design of megadalton-scale two-component icosahedral protein complexes.” Science 353.6297 (2016): 389-394. Link

 

Barron, D. R., et al. “Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment.” arXiv preprint arXiv:2208.02284 (2022). Link

 

Bin, J. H., et al. “Absolute calibration of GafChromic film for very high flux laser driven ion beams.” Review of Scientific Instruments 90.5 (2019): 053301. Link

 

Blanc, Guillermo A., et al. “MegaMapper: concept and optical design for a 6.5 m aperture massively multiplexed spectroscopic facility.” Ground-based and Airborne Telescopes IX. Vol. 12182. SPIE, 2022. Link

 

Brouwer, Lucas, et al. “Design of CCT6: A Large Aperture, Nb _3 Sn Dipole Magnet for HTS Insert Testing.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Brouwer, Lucas, et al. “Design of CCT6: A Large Aperture, Nb3Sn Dipole Magnet for HTS Insert Testing.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Brouwer, Lucas, et al. “Stabilization and control of persistent current magnets using variable inductance.” Superconductor Science and Technology 35.4 (2022): 045011. Link

 

L. Brouwer, M. Juchno, D. Arbelaez, P. Ferracin and G. Vallone, “Design of CCT6: a Large-Aperture, Nb3Sn Dipole Magnet for HTS Insert Testing,” in IEEE Transactions on Applied Superconductivity. Link

 

Cooper, Andrew P., et al. “Overview of the DESI Milky Way Survey.” arXiv preprint arXiv:2208.08514 (2022). Link

 

Cutler, G., et al. “Experimental testing of a prototype cantilevered liquid‐nitrogen‐cooled silicon mirror.” Journal of Synchrotron Radiation (2023). Link

 

Delmotte, F., et al. “New method for the determination of photoabsorption from transmittance measurements in the extreme ultraviolet.” Optics Express 30.13 (2022): 23771-23782. Link

 

Dhall, Rohan, et al. “Ultra-Transparent Atomic Layer Deposition Membranes for Liquid Cell TEM.” Microscopy and Microanalysis 28.S1 (2022): 1824-1826. Link

 

J. DiMarco et al., “Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-7, Sept. 2022, Art no. 9001407. Link

 

DUNE collaboration. “DUNE Offline Computing Conceptual Design Report.” arXiv preprint arXiv:2210.15665 (2022). Link

 

Fanning, K., et al. “Overview and operation of the DESI focal plane.” Ground-based and Airborne Instrumentation for Astronomy IX. Vol. 12184. SPIE, 2022. Link

 

Fernández, JL Rudeiros, et al. “Assembly and mechanical analysis of the canted-cosine-theta subscale magnets.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Fernández, JL Rudeiros, et al. “Mechanical and thermal analysis of an HTS superconducting magnet for an achromatic gantry for proton therapy.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

Ferracin, P., et al. “Towards 20 T hybrid accelerator dipole magnets.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-6. Link

 

Gamage, B. R., et al. High-Field Design Concept for Second Interaction Region of the Electron-Ion Collider. No. JLAB-ACP-22-3678; DOE/OR/23177-5557. Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States), 2022. Link

 

Goldberg, Kenneth A., et al. “The SEMATECH high-NA actinic reticle review project (SHARP) EUV mask-imaging microscope.” Photomask Technology 2013. Vol. 8880. SPIE, 2013. Link

 

Hakimi, Sahel, et al. “Laser–solid interaction studies enabled by the new capabilities of the iP2 BELLA PW beamline.” Physics of Plasmas 29.8 (2022): 083102. Link

 

Honscheid, K., et al. “The DESI instrument.” Ground-based and Airborne Instrumentation for Astronomy IX 12184 (2022): 121840X. Link

 

Ikeda, Z., Kamei, T., Sasaki, Y., Reynolds, M., Sakai, N., Yoshikawa, M., … & Sato, K. (2023). Discovery of a Novel Series of Potent, Selective, Orally Available, and Brain-Penetrable C1s Inhibitors for Modulation of the Complement Pathway. Journal of Medicinal Chemistry, 66(9), 6354-6371. Link

 

O. Karslıoğlu, et al. “Prospects for the expansion of standing wave ambient pressure photoemission spectroscopy to reactions at elevated temperatures.” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 40.1 (2022): 013207. Link

 

Kitaguchi–Japan, Hitoshi, et al. “MT27 Conference Organization.” IEEE Transactions on Applied Superconductivity 35.6 (2022): 0200204. Link

 

Lamman, Claire, et al. “Intrinsic Alignment as an RSD Contaminant in the DESI Survey.” arXiv preprint arXiv:2209.03949 (2022). Link

 

Lewicki, J. L., Evans, W. C., Ingebritsen, S. E., Clor, L. E., Kelly, P. J., Peek, S., … & Hunt, A. G. (2023). Geochemistry and fluxes of gases from hydrothermal features at Newberry Volcano, Oregon, USA. Journal of Volcanology and Geothermal Research, 433, 107729. Link

 

LIGO Scientific Collaboration, et al. “First joint observation by the underground gravitational-wave detector KAGRA with GEO 600.” Progress of Theoretical and Experimental Physics 2022.6 (2022): 063F01. Link

 

Moros, Alice, et al. “A Metallurgical Inspection Method to Assess the Damage in Performance-Limiting Nb3Sn Accelerator Magnet Coils.” arXiv preprint arXiv:2211.09684 (2022). Link

 

Perera, Chami, et al. “Development of a standalone zoneplate based EUV mask defect review tool.” Optical and EUV Nanolithography XXXV. SPIE, 2022. Link

 

Prats, J. Creus, et al. “Status of LBNF/DUNE near site liquid argon proximity and external cryogenics systems development.” IOP Conference Series: Materials Science and Engineering. Vol. 1240. No. 1. IOP Publishing, 2022. Link

 

Prigozhin, Daniil, et al. “The Berkeley Center for Structural Biology: A suite of macromolecular crystallography beamlines at the Advanced Light Source.” Foundations of Crystallography 78 (2022): a289. Link

 

Aglieri Rinella, G., et al. “First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors.” NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT 1028 (2022): 1-7. Link

 

E. Rochepault, P. Ferracin and G. Vallone, “20 T Hybrid Nb3Sn-HTS Block-Coil Designs for a Future Particle Collider,” in IEEE Transactions on Applied Superconductivity, (11 March 2022). Link

 

Rochepault, Etienne, Paolo Ferracin, and Giorgio Vallone. “20 T hybrid Nb 3 Sn-HTS block-coil designs for a future particle collider.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-5. Link

 

I. A. Santillana et al., “Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb3Sn Low-β Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-7, 9 Feb 2022, Art no. 4100507. Link

2 spectroscopic instrument for the study of Inflation and Dark Energy. arXiv preprint arXiv:1907.11171. Link”}” data-sheets-textstyleruns=”{“1”:0}{“1″:262,”2”:{“2”:{“1″:2,”2″:1136076},”9″:1}}” data-sheets-hyperlinkruns=”{“1″:262,”2″:”https://arxiv.org/abs/1907.11171”}{“1″:266}”> 

Schlegel, D. J., Kollmeier, J. A., Aldering, G., Bailey, S., Baltay, C., Bebek, C., … & Zaritsky, D. (2019). Astro2020 APC White Paper: The MegaMapper: az> 2 spectroscopic instrument for the study of Inflation and Dark Energy. arXiv preprint arXiv:1907.11171. Link

 

Schlegel, David J., et al. “A spectroscopic road map for cosmic frontier: DESI, DESI-II, Stage-5.” arXiv preprint arXiv:2209.03585 (2022). Link

 

Schlegel, David J., et al. “The MegaMapper: A Stage-5 Spectroscopic Instrument Concept for the Study of Inflation and Dark Energy.” arXiv preprint arXiv:2209.04322 (2022). Link

 

Seidl, Peter A., et al. “Neutralized Ion-Beam Drift Compression for Short-Pulse Target Heating Experiments.” Nuclear Science and Engineering (2022). Link

 

Setton, David J., et al. “DESI Survey Validation Spectra Reveal an Increasing Fraction of Recently Quenched Galaxies at z∼1.” arXiv preprint arXiv:2212.05070 (2022). Link

 

Shen, Tengming, et al. “Design, fabrication, and characterization of a high-field high-temperature superconducting Bi-2212 accelerator dipole magnet.” Physical Review Accelerators and Beams 25.12 (2022): 122401. Link

 

Silber, J. et al. “The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI)”. Link

 

Srivastava, Varun, et al. “Piezo-deformable mirrors for active mode matching in advanced LIGO.” Optics Express 30.7 (2022): 10491-10501. Link

 

Stern, J., et al. “Developing a vacuum pressure impregnation procedure for CORC Wires.” IEEE Transactions on Applied Superconductivity 32.6 (2022): 1-4. Link

 

Ueda, George, et al. “Tailored design of protein nanoparticle scaffolds for multivalent presentation of viral glycoprotein antigens.” Elife 9 (2020): e57659. Link

 

U.S. DOE. 2022. Supply Chain Risk Mitigation for Scientific Facilities and Tools: Report from the November 2021 Roundtable. U.S. Department of Energy Office of Science. Link

 

G. Vallone, B. Auchmann, M. Maciejewski and J. Smajic, “Magneto-Mechanical Optimization of Cross-Sections for cos(θ)Accelerator Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-5, Sept. 2022, Art no. 4002705. Link

 

Voronov, D. L., et al. “6000 lines/mm blazed grating for a high-resolution x-ray spectrometer.” Optics Express 30.16 (2022): 28783-28794. Link

 

Wang, L., et al. “Preliminary design of a helium cryogenic system for SAND detector at LBNF-DUNE near site.” IOP Conference Series: Materials Science and Engineering. Vol. 1240. No. 1. IOP Publishing, 2022. Link

 

Wang, X, et al. “An initial magnet experiment using high-temperature superconducting STAR® wires.” Superconductor Science and Technology (2022). Link

 

X. Wang et al., “Field Quality of the 4.5-m-Long MQXFA Pre-Series Magnets for the HL-LHC Upgrade as Observed During Magnet Assembly,” in IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, pp. 1-5, Sept. 2022, Art no. 4002405. Link

 

Wedal, J. C., Anderson-Sanchez, L. M., Dumas, M. T., Gould, C. A., Beltrán-Leiva, M. J., Celis-Barros, C., … & Evans, W. J. (2023). Synthesis and Crystallographic Characterization of a Reduced Bimetallic Yttrium ansa-Metallocene Hydride Complex,[K (crypt)][(μ-CpAn) Y (μ-H)] 2 (CpAn= Me2Si [C5H3 (SiMe3)-3] 2), with a 3.4 Å Yttrium–Yttrium Distance. Journal of the American Chemical Society, 145(19), 10730-10742. Link

 

Zhou, J., Gashi, A., Riminucci, F., Chang, B., Barnard, E., Cabrini, S., … & Munechika, K. (2023). Sharp, high numerical aperture (NA), nanoimprinted bare pyramid probe for optical mapping. Review of Scientific Instruments, 94(3). Link

Engineering Division 2021 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

Aad, Georges, et al. “Springer: Search for Higgs bosons decaying into new spin-0 or spin-1 particles in four-lepton final states with the ATLAS detector with 139 fb{-1} of pp collision data at {s}= 13$ TeV.” JHEP 2203.CERN-EP-2021-193 (2021): 041. Link
 

Aad, Georges, et al. “Search for Dark Matter Produced in Association with a Dark Higgs Boson Decaying into W±W∓ or Z Z in Fully Hadronic Final States from s= 13 TeV p p Collisions Recorded with the ATLAS Detector.” Physical review letters 126.12 (2021): 121802. Link

 

Aad, Georges, et al. “Medium-induced modification of Z-tagged charged particle yields in Pb+ Pb collisions at 5.02 TeV with the ATLAS detector.” Physical review letters 126.7 (2021): 072301. Link

 

Aad, G., et al. “Search for charginos and neutralinos in final states with two boosted hadronically decaying bosons and missing transverse momentum in p p collisions at s√=13 TeV with the ATLAS detector.” Physical Review D 104.11 (2021): 112010. Link

 

Aartsen, M. G., Abbasi, R., Ackermann, M., Adams, J., Aguilar, J. A., Ahlers, M., … & Jansson, M. (2021). Detection of a particle shower at the Glashow resonance with IceCube. arXiv preprint arXiv:2110.15051. Link

 

Aartsen, Mark G., et al. “IceCube-Gen2: the window to the extreme Universe.” Journal of Physics G: Nuclear and Particle Physics 48.6 (2021): 060501. Link

 

Aartsen, M. G., et al. “Searches for neutrinos from cosmic-ray interactions in the Sun using seven years of IceCube data.” Journal of Cosmology and Astroparticle Physics 2021.02 (2021): 025.Link

 

Abbasi, R., Ackermann, M., Adams, J., Aguilar, J. A., Ahlers, M., Ahrens, M., … & Jansson, M. (2021). A muon-track reconstruction exploiting stochastic losses for large-scale Cherenkov detectors. Journal of Instrumentation, 16(08), P08034. Link.

 

Abbasi, R., et al. “Search for Multi-flare Neutrino Emissions in 10 yr of IceCube Data from a Catalog of Sources.” The Astrophysical Journal Letters 920.2 (2021): L45. Link

 

Abbasi, R., et al. “Follow-up of astrophysical transients in real time with the IceCube Neutrino Observatory.” The Astrophysical Journal 910.1 (2021): 4. Link

 

Abbasi, R., et al. “A search for time-dependent astrophysical neutrino emission with icecube data from 2012 to 2017.” The Astrophysical Journal 911.1 (2021): 67. Link

 

Abbasi, R., et al. “A convolutional neural network based cascade reconstruction for the IceCube Neutrino Observatory.” Journal of Instrumentation 16.07 (2021): P07041. Link

 

Abgrall, N., et al. “LEGEND-1000 preconceptual design report.” arXiv preprint arXiv:2107.11462 (17 Nov. 2021). Link

 

Abi, Babak, et al. “Supernova neutrino burst detection with the Deep Underground Neutrino Experiment.” The European Physical Journal C 81.5 (May 2021): 1-26. Link

 

B. Abi et al., “Prospects for beyond the Standard Model physics searches at the Deep Underground Neutrino Experiment,” Eur. Phys. J. C 81, 322 (2021). Link

 

B. Abi et al., “Experiment Simulation Configurations Approximating DUNE TDR,” arXiv:2103.04797, (8 Mar. 2021), Link

 

A. Abud et al., “Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment,” arXiv preprint arXiv:2109.01304, (3 Sept. 2021). Link

 

A. Abud et al., “Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC,” arXiv: 2108.01902, (4 Aug. 2021). Link

 

Abud, A. Abed, et al. “Searching for solar KDAR with DUNE.” Journal of Cosmology and Astroparticle Physics 2021.10 (2021): 065. Link

 

Adams, C., et al. “Sensitivity of a tonne-scale NEXT detector for neutrinoless double-beta decay searches.” Journal of High Energy Physics 2021.8 (2021): 1-24. Link

 

A. Ahmmed, M. Pickering, A. Lambert and M. Paul, “Edge Aware Commonality Modeling based Reference Frame for 360 Degree Video Coding,” 2021 Digital Image Computing: Techniques and Applications (DICTA), 2021, pp. 01-06. Link

 

M. Ameen, et al. “Eight-port Octagonal-shaped Metasurface-based MIMO Antenna with Radar Cross Section Reduction.” 2021 IEEE MTT-S International Microwave and RF Conference (IMARC). IEEE, 2021. Link

 

ATLAS Collaboration. “Search for Higgs boson pair production in the two bottom quarks plus two photons final state in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2112.11876 (2021). Link

 

ATLAS Collaboration. “Search for new phenomena in pp collisions in final states with tau leptons, b-jets, and missing transverse momentum with the ATLAS detector.” arXiv preprint arXiv:2108.07665 (2021). Link

 

ATLAS Collaboration. “Modelling and computational improvements to the simulation of single vector-boson plus jet processes for the ATLAS experiment.” arXiv preprint arXiv:2112.09588 (2021). Link

 

ATLAS Collaboration. “Configuration and performance of the ATLAS b-jet triggers in Run 2.” arXiv preprint arXiv:2106.03584 (2021). Link

 

ATLAS Collaboration. “Measurement of b-quark fragmentation properties in jets using the decay B± → J/ψK± in pp collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.12 (2021): 1-46. Link

 

ATLAS Collaboration “Search for chargino–neutralino pair production in final states with three leptons and missing transverse momentum in 𝑠√=13 TeV pp collisions with the ATLAS detector.” The European Physical Journal C 81.12 (2021): 1-55. Link

 

ATLAS Collaboration. Measurement of the t𝑡t𝑡⎯⎯ production cross section in pp collisions at s√ = 13 TeV with the ATLAS detector. J. High Energ. Phys. 2021, 118 (2021). Link

 

ATLAS Collaboration. “Measurement of the production cross section of pairs of isolated photons in pp collisions at 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.11 (2021): 1-53. Link

 

ATLAS Collaboration. “Search for new phenomena in final states with two leptons and one or no b-tagged jets at s√= 13 TeV using the ATLAS detector.” Physical review letters 127.14 (2021): 141801. Link

 

ATLAS Collaboration. “Search for dark matter produced in association with a single top quark in 𝑠√=13 TeV 𝑝𝑝 collisions with the ATLAS detector.” The European Physical Journal C 81.10 (2021): 1-37. Link

 

ATLAS Collaboration. “Search for dark matter in events with missing transverse momentum and a Higgs boson decaying into two photons in pp collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.10 (2021): 1-50. Link

 

ATLAS Collaboration. “Constraints on Higgs boson properties using WW∗(→ eνμν) jj production in 36.1 fb− 1 of s√= 13 TeV pp collisions with the ATLAS detector.” European Physical Journal C: Particles and Fields 82 (2022). Link

 

ATLAS Collaboration. “AtlFast3: the next generation of fast simulation in ATLAS.” arXiv preprint arXiv:2109.02551 (2021). Link

 

ATLAS Collaboration. “Observation of electroweak production of two jets in association with an isolated photon and missing transverse momentum, and search for a Higgs boson decaying into invisible particles at 13 TeV with the ATLAS detector.” The European Physical Journal C 82.2 (2022): 1-41. Link

 

ATLAS Collaboration. “Exclusive dimuon production in ultraperipheral Pb+ Pb collisions at s N N= 5.02 TeV with ATLAS.” Physical Review C 104.2 (2021): 024906. Link

 

ATLAS Collaboration. “Evidence for Higgs boson decays to a low-mass dilepton system and a photon in pp collisions at s√ = 13 TeV with the ATLAS detector.” Physics Letters B 819 (2021): 136412. Link

 

ATLAS Collaboration. “Measurement of single top-quark production in association with a W boson in the single-lepton channel at 𝑠√=8TeV with the ATLAS detector.” The European Physical Journal C 81.8 (2021): 1-29. Link

 

ATLAS Collaboration. “Jet energy scale and resolution measured in proton–proton collisions at 𝑠√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2007.02645 (2020). Link

 

ATLAS Collaboration. “Measurements of the inclusive and differential production cross sections of a top-quark–antiquark pair in association with a Z boson at 𝑠√=13 TeV with the ATLAS detector.” The European Physical Journal C 81.8 (2021): 1-43. Link

 

ATLAS Collaboration. “Search for Displaced Leptons in s√= 13 TeV pp Collisions with the ATLAS Detector.” Physical review letters 127.5 (2021): 051802. Link

 

ATLAS Collaboration. “Measurement of the relative B±c/B± production cross section with the ATLAS detector at s√=8 TeV.” arXiv preprint arXiv:1912.02672 (2019). Link

 

ATLAS Collaboration. “Search for exotic decays of the Higgs boson into long-lived particles in pp collisions at 𝑠√ = 13 TeV using displaced vertices in the ATLAS inner detector.” Journal of High Energy Physics 2021.11 (2021): 1-41. Link

 

ATLAS Collaboration. “Two-particle azimuthal correlations in photonuclear ultraperipheral Pb+ Pb collisions at 5.02 TeV with ATLAS.” Physical Review C 104.1 (2021): 014903. Link

 

ATLAS Collaboration. “Test of the universality of τ and μ lepton couplings in W-boson decays with the ATLAS detector.” Nature physics 17.7 (2021). Link

 

ATLAS Collaboration. “Measurements of differential cross-sections in four-lepton events in 13 TeV proton-proton collisions with the ATLAS detector.” Journal of High Energy Physics 2021.7 (2021): 1-67. Link

 

ATLAS Collaboration. “Search for squarks and gluinos in final states with one isolated lepton, jets, and missing transverse momentum at 𝑠√=13 TeV with the ATLAS detector.” The European Physical Journal C 81.7 (2021): 1-33. Link

 

ATLAS Collaboration. “A search for the decays of stopped long-lived particles at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2104.03050 (2021). Link

 

ATLAS Collaboration. “Search for supersymmetry in events with four or more charged leptons in 139 fb−1 of 𝑠√ = 13 TeV pp collisions with the ATLAS detector.” Journal of High Energy Physics 2021.7 (2021): 1-57. Link

 

ATLAS Collaboration. “Muon reconstruction and identification efficiency in ATLAS using the full Run 2 pp collision data set at 𝑠√=13 TeV.” The European Physical Journal C 81.7 (2021): 1-44. Link

 

ATLAS Collaboration. “Measurements of sensor radiation damage in the ATLAS inner detector using leakage currents.” arXiv preprint arXiv:2106.09287 (2021). Link

 

ATLAS Collaboration. “Search for new phenomena in events with an energetic jet and missing transverse momentum in pp collisions at 𝑠√=13 TeV with the ATLAS detector.” Physical Review D 103.11 (2021): 112006. Link

 

ATLAS Collaboration. “Search for trilepton resonances from chargino and neutralino pair production in 𝑠√=13 TeV pp collisions with the ATLAS detector.” Physical Review D 103.11 (2021): 112003. Link

 

ATLAS Collaboration. “Measurements of W+W−+≥1 jet production cross-sections in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2103.10319 (2021). Link

 

ATLAS Collaboration. “Search for pair production of third-generation scalar leptoquarks decaying into a top quark and a τ-lepton in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2101.11582 (2021). Link

 

ATLAS Collaboration. “Search for charged Higgs bosons decaying into a top quark and a bottom quark at s√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.6 (2021): 1-47. Link

 

ATLAS Collaboration. “Measurements of Higgs bosons decaying to bottom quarks from vector boson fusion production with the ATLAS experiment at 𝑠√=13TeV.” The European Physical Journal C 81.6 (2021): 1-32. Link

 

ATLAS Collaboration. “Search for doubly and singly charged Higgs bosons decaying into vector bosons in multi-lepton final states with the ATLAS detector using proton-proton collisions at s√ = 13 TeV.” Journal of High Energy Physics 2021.6 (2021): 1-54. Link

 

ATLAS Collaboration. “Erratum to: Search for the HH → 𝑏𝑏⎯⎯⎯𝑏𝑏⎯⎯⎯ process via vector-boson fusion production using proton-proton collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.5 (2021): 1-19. Link

 

ATLAS Collaboration. “Observation of photon-induced W+W− production in pp collisions at s√ = 13 TeV using the ATLAS detector.” Physics Letters B 816 (2021): 136190. Link

 

ATLAS Collaboration. “Search for new phenomena in final states with b-jets and missing transverse momentum in s√ = 13 TeV pp collisions with the ATLAS detector.” Journal of High Energy Physics 2021.5 (2021): 1-51. Link

 

ATLAS Collaboration. “Search for a heavy Higgs boson decaying into a Z boson and another heavy Higgs boson in the ℓℓbb and ℓℓWW final states in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:2011.05639 (2020). Link

 

ATLAS Collaboration. “Erratum to: Higgs boson production cross-section measurements and their EFT interpretation in the 4ℓ decay channel at 𝑠√=13 TeV with the ATLAS detector (The European Physical Journal C,(2020), 80, 10,(957), 10.1140/epjc/s10052-020-8227-9).” European Physical Journal C 81.5 (2021): 398. Link

 

ATLAS Collaboration. “Search for heavy resonances decaying into a pair of Z bosons in the ℓ+ℓ−ℓ′+ℓ′− and ℓ+ℓ−νν¯ final states using 139 fb−1 of proton–proton collisions at s√=13TeV with the ATLAS detector. Eur. Phys. J. C 81, 332 (2021). Link

 

ATLAS Collaboration. “Erratum: Search for new non-resonant phenomena in high-mass dilepton final states with the ATLAS detector.” Journal of High Energy Physics 2021.4 (2021): 1-21. Link

 

ATLAS Collaboration. “Search for new phenomena with top quark pairs in final states with one lepton, jets, and missing transverse momentum in pp collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.4 (2021): 1-66. Link

 

ATLAS Collaboration. “Longitudinal Flow Decorrelations in Xe+ Xe Collisions at s N N= 5.44 TeV with the ATLAS Detector.” Physical review letters 126.12 (2021): 122301. Link

 

ATLAS Collaboration. “Measurement of light-by-light scattering and search for axion-like particles with 2.2 nb− 1 of Pb+ Pb data with the ATLAS detector.” Journal of High Energy Physics 2021.3 (2021): 1-45. Link

 

ATLAS Collaboration. Search for Higgs boson production in association with a high-energy photon via vector-boson fusion with decay into bottom quark pairs at s√ = 13 TeV with the ATLAS detector. J. High Energ. Phys. 2021, 268 (2021). Link

 

ATLAS Collaboration. “Search for type-III seesaw heavy leptons in dilepton final states in pp collisions at 𝑠√=13TeV with the ATLAS detector.” The European Physical Journal C 81.3 (2021): 1-30. Link

 

ATLAS Collaboration. “Search for dark matter in association with an energetic photon in pp collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of high energy physics 2021.2 (2021): 1-46. Link

 

ATLAS Collaboration. “Differential cross-section measurements for the electroweak production of dijets in association with a Z boson in proton–proton collisions at ATLAS.” The European Physical Journal C 81.2 (2021): 1-42. Link

 

ATLAS Collaboration “Measurements of WH and ZH production in the 𝐻→𝑏𝑏¯ decay channel in pp collisions at 13TeV with the ATLAS detector.” The European Physical Journal C 81.2 (2021): 1-41. Link

 

ATLAS Collaboration. “Determination of the parton distribution functions of the proton from ATLAS measurements of differential W± and Z boson production in association with jets.” arXiv preprint arXiv:2101.05095 (2021). Link

 

ATLAS Collaboration. “A search for the dimuon decay of the Standard Model Higgs boson with the ATLAS detector.” Physics Letters B 812 (2021): 135980. Link

 

ATLAS Collaboration. “Measurement of the jet mass in high transverse momentum Z (→ bb‾) γ production at 𝑠√ = 13 TeV using the ATLAS detector.” Physics Letters B 812 (2021): 135991. Link

 

ATLAS Collaboration. “Measurements of top-quark pair single- and double-differential cross-sections in the all-hadronic channel in pp collisions at s√ = 13 TeV using the ATLAS detector.” Journal of High Energy Physics 2021.1 (2021): 1-76. Link

 

ATLAS Collaboration. “Measurement of the CP-violating phase ϕs in Bs0→ J/ψϕ decays in ATLAS at 13 TeV.” European Physical Journal C 81.4 (2021): 342. Link

 

ATLAS Collaboration. “Measurement of hadronic event shapes in high-pT multijet final states at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of High Energy Physics 2021.1 (2021): 1-44. Link

 

ATLAS Collaboration. “Search for phenomena beyond the Standard Model in events with large b-jet multiplicity using the ATLAS detector at the LHC.” The European Physical Journal C 81.1 (2021): 1-29. Link

 

Bakalis, C., et al. “Accessing register spaces in FPGAs within the ATLAS DAQ scheme via the SCA eXtension.” Journal of Instrumentation 16.06 (2021): P06041. Link

 

Bakalis, C., et al. “FELIX-based Data Acquisition System Integration with the NSW Micromegas Electronics and Detector Performance Validation.” The Ninth Annual Conference on Large Hadron Collider Physics. 2021. Link

 

B. C. Benedict, M. M. Ghanbari, S. Faraji Alamouti, N. T. Ersumo and R. Muller, “Time reversal beamforming for powering ultrasonic implants,” 2021 10th International IEEE/EMBS Conference on Neural Engineering (NER), 2021, pp. 647-650, Link

 

Butterworth, J., et al. “Measurement of Higgs boson decay into b-quarks in associated production with a top-quark pair in pp collisions at s√= 13 TeV with the ATLAS detector.” The Journal of High Energy Physics 2022 (2022). Link

 

L. R. Doolittle, et al. Marble MMC v1. 0. No. Marble MMC. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States); Creotech Instruments SA, 2021. Link

 

Q. Du, et al. “Stabilizing Coherently Combined Beam Power using a Robust Learning Algorithm.” Laser Applications Conference. Optical Society of America, 2021. Link

 

Du, Qiang, et al. “Systems and methods for diffractive coherent laser combining.” U.S. Patent Application No. 17/237,384, Link

 

Du, Qiang, et al. “Modelling grain growth with the generalized Kampmann-Wagner numerical model.” Computational Materials Science 186 (2021): 110066. Link

 

Du, Qiang, et al. “81-beam coherent combination using a programmable array generator.” Optics express 29.4 (2021): 5407-5418. Link

 

C. Grace et al., “ColdADC_P2: A 16-Channel Cryogenic ADC ASIC for the Deep Underground Neutrino Experiment,” in IEEE Transactions on Nuclear Science, vol. 69, no. 1, pp. 105-112, (Jan. 2022). Link

 

C. R. Grace, et a., “A 24-Channel Digitizer With a JESD204B-Compliant Serial Interface for High-Speed Detectors,” in IEEE Transactions on Nuclear Science, vol. 68, no. 4, pp. 426-433, April 2021. Link

 

N. Hasan, et al. “Ion-Selective Membrane-Coated Graphene–Hexagonal Boron Nitride Heterostructures for Field-Effect Ion Sensing.” ACS omega 6.45 (November 2021): 30281-30291. Link

 

R. G. Huang, D. Gnani, C. Grace, Y. G. Kolomensky, Y. Mei and A. Papadopoulou, “Interfacing with cryogenic sensors via 180 nm CMOS operating near 1 Kelvin,” 2021 IEEE 14th Workshop on Low Temperature Electronics (WOLTE), 2021, pp. 1-4. Link

 

Kekic, M., et al. “Demonstration of background rejection using deep convolutional neural networks in the NEXT experiment.” Journal of High Energy Physics 2021.1 (2021): 1-22.Link

 

Kiran, Mariam, et al. “Controlling Laser Beam Combining via an Active Reinforcement Learning Algorithm.” Advanced Solid State Lasers. Optical Society of America, (3 Oct. 2021). Link

 

Li, Yue, et al. “Recent advances in hot tearing during casting of aluminium alloys.” Progress in Materials Science 117 (2021): 100741. Link

 

Liu, W., et al. “LLRF Upgrade at the Argonne Wakefield Accelerator Test Facility.” (2021). Link

 

E. Lopriore et al., “Characterization and QC practice of 16-channel ADC ASIC at cryogenic temperature for Liquid Argon TPC front-end readout electronics system in DUNE experiment,” JINST 16 T06005, (14 June 2021), Link

 

Luo, T., et al. “Design Progress of ALS-U 3rd-Harmonic Cavity.” (2021) Link

 

S. Manly, et al. “Deep Underground Neutrino Experiment (DUNE) near detector conceptual design report.” Instruments 5.4 (2021): 31. Link

 

Martínez-Lema, Gonzalo, et al. “Sensitivity of the NEXT experiment to Xe-124 double electron capture.” Journal of High Energy Physics 2021.2 (2021): 1-25. Link

 

W. E. Norum. LBNL BPM Firmware (CAL-BPM) v1. 0: software (USA, California). LBNL BPM Software. Link

 

W. E. Norum. LBNL Cell controller v1. 0: software (USA, California). LBNL BPM Software. Link

 

W. E. Norum, & USDOE. (2021, April 20). XVC FTDI JTAG v1.0 [Computer software]. Link

 

Pei, Hanzhang, et al. “Design and Operation of Coherent Pulse Stacking Amplification as a Deep Recurrent Neural Network.” CLEO: Science and Innovations. Optica Publishing Group, 2021. Link

 

Posen, S., et al. “Lcls-ii-he verification cryomodule high gradient performance and quench behavior.” arXiv preprint arXiv:2110.14580 (2021). Link

 

Prakash, Tarun, Raghvendra Kumar Chaudhary, and Ravi Kumar Gangwar. “Pattern‐reconfigurable antenna in azimuth plane using SP3T reconfigurable switching network.” IET Microwaves, Antennas & Propagation 15.1 (2021): 62-68. Link

 

T. Prakash, et al. “Quad-polarization Reconfigurable Frequency Scanning 2× 3 Array Antenna for 5 GHz Band Application.” 2021 IEEE MTT-S International Microwave and RF Conference (IMARC). IEEE, 2021. Link

 

T. Prakash, et al., “Quad-Beam Octa Cross-Slotted Pattern Reconfigurable Antenna for 5.8 GHz Band Application.” 2020 50th European Microwave Conference (EuMC). IEEE, 2021. Link

 

Rainville, Alexander, et al. “22mJ Coherent Beam Combining from Three 85μm Core CCC Fiber Amplifiers.” 2021 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2021. Link

 

Simón, A., Ifergan, Y., Redwine, A. B., Weiss-Babai, R., Arazi, L., Adams, C., … & Yahlali, N. (2021). Boosting background suppression in the NEXT experiment through Richardson-Lucy deconvolution. Journal of High Energy Physics, 2021(7), 1-38. Link.

 

Sirunyan, Albert M., et al. “Search for a heavy resonance decaying to a top quark and a W boson at 𝑠√ = 13 TeV in the fully hadronic final state.” Journal of High Energy Physics 2021.12 (Dec. 2021): 1-46. Link

 

Tang, Kai, et al. “Representation of the Multiphysical Properties of SiO2-Al2O3-CaO Slags by Deep Neural Networks.” Available at SSRN 3930028 (2021). Link

 

Troeng, Olof, and Lawrence Doolittle. “Low-Latency Digital Downconversion for Control Applications.” arXiv preprint arXiv:2102.05906 (2021), Link

 

Tumasyan, Armen, et al. Probing charm quark dynamics via multiparticle correlations in PbPb collisions at sNN‾‾‾√= 5.02 TeV. No. CERN-EP-2021-254. 2021. Link

 

Tumasyan, Armen, et al. “Measurement of the inclusive and differential t𝑡⎯⎯γ cross sections in the single-lepton channel and EFT interpretation at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2021.12 (Dec. 2021): 1-59. Link

 

Tumasyan, Armen. Measurements of the associated production of a W boson and a charm quark in proton-proton collisions at √s = 8 TeV. No. CMS-SMP-18-013; CERN-EP-2021-206; FERMILAB-PUB-21-693-CMS; arXiv: 2112.00895. Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States); Lawrence Livermore National Lab.(LLNL), Livermore, CA (United States), 1 Dec. 2021. Link

 

Tumasyan, Armen, et al. “Measurement of the top quark mass using events with a single reconstructed top quark in pp collisions at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2021.12 (Dec. 2021): 1-57. Link

 

Turner, Marlene, et al. “BELLA Petawatt Second Beamline Commissioning and Experimental Plans.” Bulletin of the American Physical Society 66 (8 November 2021). Link

 

Varghese, Philip, et al. Resonance Control System for the PIP-II IT HWR Cryomodule. No. FERMILAB-CONF-21-831-AD. Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2021. Link

 

Varghese, Philip, et al. Performance of the LLRF System for the Fermilab PIP-II Injector Test. No. FERMILAB-CONF-21-818-AD. Fermi National Accelerator Lab.(FNAL), Batavia, IL (United States), 2021. Link

 

Wang, Dan, et al. “CALIPR: Coherent addition using learned interference pattern recognition.” Laser Applications Conference. Optical Society of America, 3 Oct. 2021. Link

 

Wang, Dan, et al. “Stabilization of the 81-channel coherent beam combination using machine learning.” Optics express 29.4 (2021): 5694-5709. Link

 

Weber, J., Bell, J., Chin, M., De Santis, S., Gunion, R., Murthy, S., … & Serrano, C. (2021). ALS-U INSTRUMENTATION OVERVIEW. Link

 

M. E. Wiedenbeck, et al. “Thin silicon solid-state detectors for energetic particle measurements-Development, characterization, and application on NASA’s Parker Solar Probe mission.” Astronomy & Astrophysics 650 (2021): A27. Link

 

Xiao, Xingyu, et al. “Dissolution kinetics of irregular second phase in as-cast Cu-Ti alloys via a multi-particle dissolution model.” Computational Materials Science 200 (1 Dec. 2021). 110842. Link

Magnetics Engineering Department

Ambrosio, Giorgio, et al. “Lessons learned from the prototypes of the MQXFA low-beta quadrupoles for HL-LHC and status of production in the US.” IEEE Transactions on Applied Superconductivity 31.5 (2021): 1-5. Link
 

D. M. Araujo et al., “Progress on the Upgrade of EDIPO, a 15 T Large Aperture Dipole,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-5, Aug. 2021, Art no. 9500205. Link

 

K. Backes et al., “A quantum enhanced search for dark matter axions,” Nature. 590. 238-242. (February, 2021). Link

 

Benedetto, E., et al. “A carbon-ion superconducting gantry and a synchrotron based on canted cosine theta magnets.” arXiv preprint arXiv:2105.04205 (2021). Link

 

Bogomilov, M., et al. “Performance of the MICE diagnostic system.” Journal of Instrumentation 16.08 (2021): P08046. Link

 

V. Calvelli et al., “R2D2, the CEA Graded Nb3Sn Research Racetrack Dipole Demonstrator Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-6, Aug. 2021, Art no. 4002706. Link

 

D. Davis, T. Shen, M. Marchevsky and E. Ravaioli, “Stray-Capacitance As a Simple Tool for Monitoring and Locating Heat Generation Demonstrated in Three Superconducting Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 6, pp. 1-11, Sept. 2021, Art no. 4604111. Link

 

Fajardo, L. Garcia, et al. “First demonstration of high current canted-cosine-theta coils with Bi-2212 Rutherford cables.” Superconductor Science and Technology 34.2 (2021): 024001. Link

 

I. Kesgin et al., “Fabrication and Testing of 18-mm-Period, 0.5-m-Long Nb3Sn Superconducting Undulator,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-5, Aug. 2021, Art no. 4100205. Link

 

I. Pong et al., “Cable Design and Development for the High-Temperature Superconductor Cable Test Facility Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 7, pp. 1-5, Oct. 2021, Art no. 4804505. Link

 

Prestemon, Soren, and MAP Collaboration. “Magnet Needs for a Muon Collider.” Bulletin of the American Physical Society 66 (2021), Link

 

Prestemon, Soren. “High Temperature Superconductor Cable Test Facility Specifications.” (2021). Link

 

Takala, E., et al. “Mechanical Comparison of Short Models of Nb 3 Sn Low-β Quadrupole for the Hi-Lumi LHC.” IEEE Transactions on Applied Superconductivity 31.5 (2021): 1-6. Link

 

Teyber, Reed, et al. “Inverse Biot–Savart Optimization for Superconducting Accelerator Magnets.” IEEE Transactions on Magnetics 57.9 (2021): 1-7. Link

 

Todesco, E., et al. “The high luminosity LHC interaction region magnets towards series production.” Superconductor Science and Technology 34.5 (2021): 053001. Link

 

G. Vallone et al., “Magnetic and Mechanical Analysis of a Large Aperture 15 T Cable Test Facility Dipole Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-6, Aug. 2021, Art no. 9500406. Link

 

G. Vallone et al., “3D Mechanical Analysis of a Compact Nb3Sn IR Quadrupole for EIC,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-5, Aug. 2021, Art no. 4002105. Link

 

Velev, Gueorgui V., et al. “Design and construction of a high field cable test facility at Fermilab.” IEEE Transactions on Applied Superconductivity 31.5 (2021): 1-4. Link

 

X. Wang et al., “Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC ® wires,” Superconductor Science and Technology, vol. 34, no. 1, p. 015012, Jan. 2021. Link

 

H. Zhao et al., “Design and Fabrication of Conduction-Cooled High Uniformity Superconducting Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 8, pp. 1-4, Nov. 2021, Art no. 4902004. Link

 

J. Muratore et al., “Test Results of the First Pre-Series Quadrupole Magnets for the LHC Hi-Lumi Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-4, Aug. 2021, Art no. 4001804. Link

 

H. Song et al., “Magnetic Field Measurements of First Pre-series Full-Length 4.2 m Quadrupole MQXFA03 Using PCB Rotating Coils for the Hi-Lumi LHC Project,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-7, Aug. 2021, Art no. 4000207. Link

Mechanical Engineering Department

 

Abbott, R., et al. “All-sky search for short gravitational-wave bursts in the third Advanced LIGO and Advanced Virgo run.” Physical Review D 104.12 (23 Dec 2021): 122004. Link

 

Abbott, R., et al. “Narrowband searches for continuous and long-duration transient gravitational waves from known pulsars in the LIGO-Virgo third observing run.” arXiv preprint arXiv:2112.10990 (21 Dec 2021). Link

 

Abbott, R., et al. “Tests of General Relativity with GWTC-3.” arXiv preprint arXiv:2112.06861 (13 Dec 2021). Link

 

Abud, A. Abed, et al. “Deep underground neutrino experiment (DUNE) near detector conceptual design report.” Instruments 5.4 (2021): 31. Link

 

Abi, B., et al. “Prospects for beyond the Standard Model physics searches at the Deep Underground Neutrino Experiment.” The European Physical Journal C 81.4 (2021): 1-51, Link

 

Abi, B., et al. arXiv: Experiment Simulation Configurations Approximating DUNE TDR. No. FERMILAB-FN-1125-ND. 2021. Link

 

Abud, A. Abed, et al. “Searching for solar KDAR with DUNE.” Journal of Cosmology and Astroparticle Physics 2021.10 (2021): 065, Link

 

Abud, A. Abed, et al. “Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment.” arXiv preprint arXiv:2109.01304 (2021), Link

 

Abud, A. Abed, et al. arXiv: Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC. No. arXiv: 2108.01902. 2021, Link

 

D. Androic, et al. “First Determination of the 27Al Neutron Distribution Radius from a Parity-Violating Electron Scattering Measurement.” arXiv preprint arXiv:2112.15412 (31 December 2021). Link

 

D. Androic, et al. “Measurement of the beam-normal single-spin asymmetry for elastic electron scattering from C 12 and Al 27.” Physical Review C 104.1 (7 July 2021): 014606. Link

 

A. F. Brooks et al., “Point absorbers in Advanced LIGO,” Applied Optics, vol. 60, no. 13, p. 4047, May 2021. Link

 

C. P. Sherwood et al., “Organic Semiconductors for Optically Triggered Neural Interfacing: The Impact of Device Architecture in Determining Response Magnitude and Polarity,” in IEEE Journal of Selected Topics in Quantum Electronics, vol. 27, no. 4, pp. 1-12, July-Aug. 2021, Art no. 7400212 Link

 

H.P. Martins, et al., “Near total reflection x-ray photoelectron spectroscopy: quantifying chemistry at solid/liquid and solid/solid interfaces.” Journal of Physics D: Applied Physics 54.46 (September 2021): 464002. Link

 

Oliver, Thomas, et al. “Mechanical Design of ALS-U Swap-out Kicker Stripline Electrodes.” (2021). Link

 

Pina-Hernandez, Carlos, et al. “Ultra-high refractive index polymers in the visible wavelength for nanoimprint lithography.” Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIV. Vol. 11696. International Society for Optics and Photonics, 5 March 2021. Link

 

Preissner, C., et al. “A family of high-stability granite stages for synchrotron applications.” 11th Int. Conf. on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation (MEDSI2020), Chicago, IL, USA, virtual conference. 2021. Link

 

G. A. Rinella, et al. “arXiv: First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors” arXiv: 2105.13000, 27 May 2021. Link.

 

V. Srivastava et al., “Piezo-deformable Mirrors for Active Mode Matching in Advanced LIGO,” Oct. 2021, Accessed: Feb. 27, 2022. [Online]. Link

 

E. Takala et al., “Mechanical Comparison of Short Models of Nb3 Sn Low-β Quadrupole for the Hi-Lumi LHC,” in IEEE Transactions on Applied Superconductivity, vol. 31, no. 5, pp. 1-6, Aug. 2021, Art no. 4000306. Link

 

Troitino, J. Ferradas, et al. “A methodology for the analysis of the three-dimensional mechanical behavior of a Nb3Sn superconducting accelerator magnet during a quench.” Superconductor Science and Technology 34.8 (8 June 2021): 084003. Link

 

M. Turner, et al. “BELLA Petawatt Second Beamline Commissioning and Experimental Plans.” Bulletin of the American Physical Society 66 (2021). Link

 

G.Vallone., “Coil Composite and Interface Engineering.” Workshop on State-of-the-Art in High Field Accelerator Magnets. (15 April 2021). Link

 

D. Voronov, et al., Highly efficient ultra-low blaze angle multilayer grating. Optics Express. 29. (May 2021). Link

 

Wang, D., et al. “The Broad-Band Impedance Budget in the Storage Ring of the ALS-U Project.” (2021). Link

Engineering Division 2019 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

C. Anderson, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 26 March 2019. Link
 

Lacey, Ian, et al. “Transfer of autocollimator calibration for use with scanning gantry profilometers for accurate determination of surface slope and curvature of state-of-the-art x-ray mirrors.” Advances in Metrology for X-Ray and EUV Optics VIII. Vol. 11109. International Society for Optics and Photonics, (2 October 2019). Link

 

ATLAS Collaboration. “Search for the Higgs boson decays→ And→ In Collisions at with the ATLAS detector.” Physics Letters B 801 (2019). Link

 

ATLAS Collaboration. “Measurement of flow harmonics correlations with mean transverse momentum in lead–lead and proton–lead collisions at 𝑠NN‾‾‾‾√=5.02 TeV with the ATLAS detector.” The European Physical Journal C 79.12 (2019): 1-29. Link

 

ATLAS Collaboration. “Measurement of angular and momentum distributions of charged particles within and around jets in Pb+ Pb and p p collisions at s N N= 5.02 TeV with the ATLAS detector.” Physical review C 100.6 (2019): 064901. Link

 

ATLAS Collaboration. “Search for bottom-squark pair production with the ATLAS detector in final states containing Higgs bosons, b-jets and missing transverse momentum.” Journal of High Energy Physics 2019.12 (2019): 1-50. Link

 

ATLAS Collaboration. “Measurements of top-quark pair differential and double-differential cross-sections in the ℓ+jets channel with pp collisions at 𝑠√=13 TeV using the ATLAS detector.” The European Physical Journal C 79.12 (2019): 1-84. Link

 

ATLAS Collaboration (2019). Measurement of K0S and Λ0 production in tt¯ dileptonic events in pp collisions at s√= 7 TeV with the ATLAS detector. European Physical Journal C, 79(12), [1017]. Link

 

ATLAS Collaboration. “Combination of searches for Higgs boson pairs in Collisions at with the ATLAS detector.” Physics Letters B 800 (2019). Link

 

Aaboud, M., Aad, G., Abbott, B. et al. Measurement of 𝑊±𝑍 production cross sections and gauge boson polarisation in pp collisions at 𝑠√=13 TeV with the ATLAS detector. Eur. Phys. J. C 79, 535 (2019). Link

 

ATLAS Collaboration. “Measurement of the production cross section for a Higgs boson in association with a vector boson in the H-> WW*-> l nu l nu channel in pp collisions at root s= 13 TeV with the ATLAS detector.” (2019). Link

 

ATLAS Collaboration. “Search for a right-handed gauge boson decaying into a high-momentum heavy neutrino and a charged lepton in pp collisions with the ATLAS detector at s= 13 TeV.” Physics Letters B 798 (2019): 134942. Link

 

ATLAS Collaboration. “Measurement of W±-boson and Z-boson production cross-sections in pp collisions at s√=2.76 TeV with the ATLAS detector,” arXiv preprint arXiv:1907.03567 (2019). Link

 

ATLAS Collaboration. “ATLAS b-jet identification performance and efficiency measurement with 𝑡𝑡¯ events in pp collisions at 𝑠√=13 TeV.” The European physical journal C 79.11 (2019): 1-36. Link

 

ATLAS Collaboration. “arXiv: Measurement of differential cross sections for single diffractive dissociation in s√=8 TeV pp collisions using the ATLAS ALFA spectrometer.” JHEP 2002.arXiv: 1911.00453 (2019): 042. Link

 

ATLAS Collaboration. “Measurement of 𝑊± boson production in Pb+Pb collisions at 𝑠NN‾‾‾‾√=5.02 TeV with the ATLAS detector.” The European Physical Journal C 79.11 (2019): 1-32. Link

 

ATLAS Collaboration. “arXiv: Transverse momentum and process dependent azimuthal anisotropies in sNN‾‾‾‾√=8.16 TeV p+Pb collisions with the ATLAS detector.” Eur. Phys. J. C 80.CERN-EP-2019-217 (2019): 73. Link

 

ATLAS Collaboration. “Measurement of the tt¯ production cross-section and lepton differential distributions in eμ dilepton events from pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1910.08819 (2019). Link

 

ATLAS Collaboration. “Search for new resonances in mass distributions of jet pairs using 139 fb−1 of pp collisions at s√ = 13 TeV with the ATLAS detector.” Journal of high energy physics 2020.3 (2020): 1-41. Link

 

ATLAS Collaboration. “Observation of electroweak production of a same-sign W boson pair in association with two jets in pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1906.03203 (2019). Link

 

ATLAS Collaboration. “Measurement of fiducial and differential 𝑊+𝑊− production cross-sections at 𝑠√=13 TeV with the ATLAS detector.” The European Physical Journal C 79.10 (2019): 1-34. Link

 

ATLAS Collaboration. “Measurement of the inclusive isolated-photon cross section in pp collisions at s√=13 TeV using 36 fb−1 of ATLAS data.” arXiv preprint arXiv:1908.02746 (2019). Link

 

ATLAS Collaboration. “Search for heavy neutral leptons in decays of W bosons produced in 13 TeV pp collisions using prompt and displaced signatures with the ATLAS detector.” Journal of high energy physics 2019.10 (2019): 1-47. Link

 

ATLAS Collaboration. “Measurement of ZZ production in the ℓℓνν final state with the ATLAS detector in pp collisions at 𝑠√ = 13 TeV.” Journal of High Energy Physics 2019.10 (2019): 1-48. Link

 

ATLAS Collaboration. “Identification of boosted Higgs bosons decaying into b-quark pairs with the ATLAS detector at 13 TeV.” arXiv preprint arXiv:1906.11005 (2019). Link

 

ATLAS Collaboration. “Measurement of the inclusive cross-section for the production of jets in association with a Z boson in proton–proton collisions at 8 TeV using the ATLAS detector.” The European Physical Journal C 79.10 (2019): 1-47. Link

 

ATLAS Collaboration. “Search for a heavy charged boson in events with a charged lepton and missing transverse momentum from p p collisions at s= 13 TeV with the ATLAS detector.” Physical review D 100.5 (2019): 052013. Link

 

ATLAS Collaboration. “Properties of jet fragmentation using charged particles measured with the ATLAS detector in p p collisions at s= 13 TeV.” Physical review D 100.5 (2019): 052011. Link

 

ATLAS Collaboration. “Search for high-mass dilepton resonances using 139 fb− 1 of pp collision data collected at s= 13 TeV with the ATLAS detector.” Physics Letters B 796 (2019): 68-87. Link

 

ATLAS Collaboration. “Measurement of prompt photon production in sNN= 8.16 TeV p+ Pb collisions with ATLAS.” Physics Letters B 796 (2019): 230-252. Link

 

ATLAS Collaboration. “Dijet azimuthal correlations and conditional yields in p p and p+ Pb collisions at s N N= 5.02 TeV with the ATLAS detector.” Physical review C 100.3 (2019): 034903. Link

 

ATLAS Collaboration. “Search for excited electrons singly produced in proton–proton collisions at 𝑠√ = 13 TeV with the ATLAS experiment at the LHC.” The European Physical Journal C 79.9 (2019): 1-30. Link

 

ATLAS Collaboration. “Searches for scalar leptoquarks and differential cross-section measurements in dilepton–dijet events in proton–proton collisions at a centre-of-mass energy of 𝑠√𝑠√ = 13 TeV with the ATLAS experiment.” The European Physical Journal C 79.9 (2019): 1-45. Link

 

ATLAS Collaboration. “Search for diboson resonances in hadronic final states in 139 fb−1 of pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1906.08589 (2019). Link

 

ATLAS Collaboration. “Measurement of the cross-section and charge asymmetry of W bosons produced in proton–proton collisions at 𝑠√=8 TeV with the ATLAS detector.” The European Physical Journal C 79.9 (2019): 1-25. Link

 

ATLAS Collaboration. “Search for electroweak diboson production in association with a high-mass dijet system in semileptonic final states in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 100.3 (2019): 032007. Link

 

ATLAS Collaboration. “Search for low-mass resonances decaying into two jets and produced in association with a photon using pp collisions at s√=13 TeV with the ATLAS detector.” arXiv preprint arXiv:1901.10917 (2019). Link

 

ATLAS Collaboration. “Electron reconstruction and identification in the ATLAS experiment using the 2015 and 2016 LHC proton–proton collision data at 𝑠√=13 TeV.” The European Physical Journal C 79.8 (2019): 1-40. Link

 

ATLAS Collaboration. “Measurement of jet-substructure observables in top quark, W boson and light jet production in proton-proton collisions at \sqrt{s} = 13 TeV with the ATLAS detector.” Journal of high energy physics 2019.8 (2019): 1-47. Link

 

ATLAS Collaboration. “Observation of light-by-light scattering in ultraperipheral Pb+ Pb collisions with the ATLAS detector.” Physical review letters 123.5 (2019): 052001. Link

 

ATLAS Collaboration. “Search for chargino and neutralino production in final states with a Higgs boson and missing transverse momentum at s= 13 TeV with the ATLAS detector.” Physical Review D 100.1 (2019): 012006. Link

 

ATLAS Collaboration. “arXiv: Search for displaced vertices of oppositely charged leptons from decays of long-lived particles in pp collisions at s√ = 13 TeV with the ATLAS detector.” Phys. Lett. B 801.arXiv: 1907.10037 (2019): 135114. Link

 

ATLAS Collaboration. “Comparison of Fragmentation Functions for Jets Dominated by Light Quarks and Gluons from p p and Pb+ Pb Collisions in ATLAS.” Physical review letters 123.4 (2019): 042001. Link

 

ATLAS Collaboration. “Search for scalar resonances decaying into μ+μ− in events with and without b-tagged jets produced in proton-proton collisions at 𝑠√=13 TeV with the ATLAS detector.” Journal of high energy physics 2019.7 (2019): 1-41. Link

 

ATLAS Collaboration. “Combination of searches for invisible Higgs boson decays with the ATLAS experiment.” Physical review letters 122.23 (2019): 231801. Link

 

ATLAS Collaboration. “Search for invisible Higgs boson decays in vector boson fusion at s= 13TeV with the ATLAS detector.” Physics Letters B 793 (2019): 499-519. Link

 

ATLAS Collaboration. “Searches for third-generation scalar leptoquarks in 𝑠√ = 13 TeV pp collisions with the ATLAS detector.” Journal of High Energy Physics 2019.6 (2019): 1-48. Link

 

ATLAS Collaboration. “Search for heavy charged long-lived particles in the ATLAS detector in 36.1 fb− 1 of proton-proton collision data at s= 13 TeV.” Physical review D 99.9 (2019): 092007. Link

 

ATLAS Collaboration. “Search for heavy particles decaying into a top-quark pair in the fully hadronic final state in p p collisions at s= 13 TeV with the ATLAS detector.” Physical review D 99.9 (2019): 092004. Link

 

ATLAS Collaboration. “Measurements of inclusive and differential fiducial cross-sections of 𝑡𝑡¯𝛾 production in leptonic final states at 𝑠√=13 TeV in ATLAS.” The European Physical Journal C 79.5 (2019): 1-41. Link

 

ATLAS Collaboration. “Combinations of single-top-quark production cross-section measurements and |fLVVtb| determinations at 𝑠√ = 7 and 8 TeV with the ATLAS and CMS experiments.” Journal of High Energy Physics 2019.5 (2019): 1-81. Link

 

ATLAS Collaboration. “Constraints on mediator-based dark matter and scalar dark energy models using s√=13 TeV pp collision data collected by the ATLAS detector.” arXiv preprint arXiv:1903.01400 (2019). Link

 

ATLAS Collaboration. “Search for large missing transverse momentum in association with one top-quark in proton-proton collisions at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of high energy physics 2019.5 (2019): 1-50. Link

 

ATLAS Collaboration.. “Search for top-quark decays t → Hq with 36 fb−1 of pp collision data at 𝑠√ = 13 TeV with the ATLAS detector.” Journal of high energy physics 2019.5 (2019): 1-67. Link

 

Atlas Collaboration. “Performance of top-quark and W-boson tagging with ATLAS in Run 2 of the LHC.” The European physical journal. C 79.5 (2019): 375. Link

 

ATLAS Collaboration. “Measurement of the t t¯ Z and t t¯ W cross sections in proton-proton collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 99.7 (2019): 072009. Link

 

ATLAS Collaboration. “Search for the Production of a Long-Lived Neutral Particle Decaying within the ATLAS Hadronic Calorimeter in Association with a Z Boson from p p Collisions at s= 13 TeV.” Physical review letters 122.15 (2019): 151801. Link

 

ATLAS Collaboration. “Cross-section measurements of the Higgs boson decaying into a pair of τ-leptons in proton-proton collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 99.7 (2019): 072001. Link

 

ATLAS Collaboration. “Measurement of the ratio of cross sections for inclusive isolated-photon production in pp collisions at 𝑠√ = 13 and 8 TeV with the ATLAS detector.” Journal of high energy physics 2019.4 (2019): 1-47. Link

 

ATLAS Collaboration. “Study of the rare decays of B s 0 and B0 mesons into muon pairs using data collected during 2015 and 2016 with the ATLAS detector.” Journal of high energy physics 2019.4 (2019): 1-47. Link

 

ATLAS Collaboration. “Measurement of the four-lepton invariant mass spectrum in 13 TeV proton-proton collisions with the ATLAS detector.” Journal of high energy physics 2019.4 (2019): 1-50. Link

 

ATLAS Collaboration. “Search for four-top-quark production in the single-lepton and opposite-sign dilepton final states in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 99.5 (2019): 052009. Link

 

ATLAS Collaboration. “Evidence for the production of three massive vector bosons with the ATLAS detector.” arXiv preprint arXiv:1903.10415 (2019). Link

 

ATLAS Collaboration. “Search for long-lived neutral particles produced in p p collisions at s= 13 TeV decaying into displaced hadronic jets in the ATLAS inner detector and muon spectrometer.” Physical review D 101.5 (2020): 052013. Link

 

ATLAS Collaboration. “Search for heavy long-lived multicharged particles in proton-proton collisions at s= 13 TeV using the ATLAS detector.” Physical review D 99.5 (2019): 052003. Link

 

ATLAS Collaboration. “Measurement of VH, H→bb¯ production as a function of the vector-boson transverse momentum in 13 TeV pp collisions with the ATLAS detector.” arXiv preprint arXiv:1903.04618 (2019). Link

 

ATLAS Collaboration. “Search for Higgs boson decays into a pair of light bosons in the bbμμ final state in pp collision at s= 13TeV with the ATLAS detector.” Physics Letters B 790 (2019): 1-21. Link

 

ATLAS Collaboration. “Measurement of the nuclear modification factor for inclusive jets in Pb+ Pb collisions at sNN= 5.02 TeV with the ATLAS detector.” Physics Letters B 790 (2019): 108-128. Link

 

ATLAS Collaboration.. “Measurement of the photon identification efficiencies with the ATLAS detector using LHC Run 2 data collected in 2015 and 2016.” The European Physical Journal C 79.3 (2019): 1-41. Link

 

ATLAS Collaboration. “Measurements of gluon–gluon fusion and vector-boson fusion Higgs boson production cross-sections in the H→ WW⁎→ eνμν decay channel in pp collisions at s= 13TeV with the ATLAS detector.” Physics Letters B 789 (2019): 508-529. Link

 

ATLAS Collaboration. “Measurement of photon–jet transverse momentum correlations in 5.02 TeV Pb+ Pb and pp collisions with ATLAS.” Physics Letters B 789 (2019): 167-190. Link

 

ATLAS Collaboration. “Correlated long-range mixed-harmonic fluctuations measured in pp, p+ Pb and low-multiplicity Pb+ Pb collisions with the ATLAS detector.” Physics Letters B 789 (2019): 444-471. Link

 

ATLAS Collaboration. “In situ calibration of large-radius jet energy and mass in 13 TeV proton–proton collisions with the ATLAS detector.” The European Physical Journal C 79.2 (2019): 1-42. Link

 

ATLAS Collaboration. “Search for pairs of highly collimated photon-jets in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 99.1 (2019): 012008. Link

 

ATLAS Collaboration. “Search for vector-boson resonances decaying to a top quark and bottom quark in the lepton plus jets final state in pp collisions at s= 13 TeV with the ATLAS detector.” Physics Letters B 788 (2019): 347-370. Link

 

ATLAS Collaboration. “Search for heavy Majorana or Dirac neutrinos and right-handed W gauge bosons in final states with two charged leptons and two jets at root s= 13 TeV with the ATLAS detector.” (2019). Link

 

ATLAS Collaboration. “Search for long-lived particles in final states with displaced dimuon vertices in p p collisions at s= 13 TeV with the ATLAS detector.” Physical Review D 99.1 (2019): 012001. Link

 

ATLAS Collaboration. “Properties of g→ b b¯ at small opening angles in p p collisions with the ATLAS detector at s= 13 TeV.” Physical Review D 99.5 (2019): 052004. Link

 

ATLAS Collaboration. “Resolution of the ATLAS muon spectrometer monitored drift tubes in LHC Run 2.” Journal of instrumentation 14.09 (2019): P09011. Link

 

ATLAS Collaboration. Erratum to: Measurements of W and Z boson production in pp collisions at s√=5.02 TeV with the ATLAS detector. Eur. Phys. J. C 79, 374 (2019). Link

 

ATLAS Collaboration.”Combinations of single-top-quark production cross-section measurements and vertical bar f(LV)V(tb)vertical bar determinations at root s=7 and 8 TeV with the ATLAS and CMS experiments”.JOURNAL OF HIGH ENERGY PHYSICS (2019). Link

 

ATLAS Collaboration. “Measurement of the t (t) over-barZ and t (t) over-barW cross sections in proton-proton collisions at root s= 13 TeV with the ATLAS detector.” (2019). Link

 

ATLAS Collaboration. Search for doubly charged scalar bosons decaying into same-sign W boson pairs with the ATLAS detector. Eur. Phys. J. C 79, 58 (2019). Link

 

ATLAS Collaboration. Measurement of the top quark mass in the tt¯→ lepton+jets channel from s√=8 TeV ATLAS data and combination with previous results. Eur. Phys. J. C 79, 290 (2019). Link

 

ATLAS Collaboration. “Measurement of the azimuthal anisotropy of charged-particle production in Xe+Xe collisions at sNN‾‾‾‾√=5.44 TeV with the ATLAS detector.” (2019). Link

 

Bakalis, C. VMM3a: an ASIC for Tracking Detectors. No. ATL-MUON-PROC-2019-010. ATL-COM-MUON-2019-053, 2019. Link

 

CMS collaboration. “Measurement of normalized differential tt⎯⎯ cross sections in the dilepton channel from pp collisions at s√= 13 TeV.” arXiv preprint arXiv:1708.07638 (2017). Link

 

Betz, M., et al. “Low phase noise master oscillator generation and distribution for ALS and ALS-U.” arXiv preprint arXiv:1910.07111 (16 Oct. 2019). Link

 

Feng, H. Q., et al. “Optimization of RF Cavities Using MOGA for ALS-U.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 

Feng, Hanqi, et al. “Design study on higher harmonic cavity for ALS-U.” Proceedings of the 10th International Particle Accelerator Conference (IPAC2019). 2019. Link

 

Feng, H., et al. “Proceedings of IPAC 2019, Melbourne, Australia.” (2019). Link

 

Steier, Christoph, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 

Sirunyan, Albert M., et al. “Measurements of the Higgs boson width and anomalous H V V couplings from on-shell and off-shell production in the four-lepton final state.” Physical Review D 99.11 (11 June 2019): 112003. Link

 

Sirunyan, Albert M., et al. “Performance of missing transverse momentum reconstruction in proton-proton collisions at√ s= 13 TeV using the CMS detector.” (2019). Link

 

Sirunyan, Albert M., et al. “Pseudorapidity distributions of charged hadrons in xenon-xenon collisions at sNN= 5.44 TeV.” Physics Letters B 799 (10 Dec 2019): 135049. Link

 

Sirunyan, Albert M., et al. “Search for long-lived particles using delayed photons in proton-proton collisions at s= 13 TeV.” Physical Review D 100.11 (9 Dec 2019): 112003. Link

 

Sirunyan, Albert M., et al. “Constraints on anomalous H V V couplings from the production of Higgs bosons decaying to τ lepton pairs.” Physical Review D 100.11 (4 Dec 2019): 112002. Link

 

V. Arsov, et al. “First results from the bunch arrival-time monitors at SwissFEL.” Proceedings of the 2018 International Beam Instrumentation Conference. 2019. Link

 

P. Chevtsov, et al. “SwissFEL Electron Beam Diagnostics Tools and their Control System Components.” 12th Int. Workshop on Emerging Technologies and Scientific Facilities Controls (PCaPAC’18), Hsinchu, Taiwan, 16-19 October 2018. JACOW Publishing, Geneva, Switzerland, 2019. Link

 

Baek, Unpil, et al. “An FPGA-based quantum feedback system for real-time qubit control.” APS March Meeting Abstracts. Vol. 2019. 2019. Link

 

L. Doolittle, et al., (2019). Marble v1. 0 (No. 2019-159). LBNL Intellectual Property Office (IPO). Link

 

Doolittle, L. et., Zest v1. 0. No. 2019-057. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019. Link

 

Du, Qiang, et al. “Digital Low-Level RF control system for Advanced Light Source Storage Ring.” arXiv preprint arXiv:1910.07175 (2019). Link

 

Hovater, Curt, et al. Commissioning the JLab LERF Cryomodule Test Facility. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019. Link

 

Huang, G., et al. “Scalable FPGA-based qubit control hardware.” APS March Meeting Abstracts. Vol. 2019. 2019. Link

 

C. Rivetta et al., “EMC issues in RF stations for particle accelerators,” 2019 International Symposium on Electromagnetic Compatibility – EMC EUROPE, 2019, pp. 784-789.  Link

 

L. Doolittle, et al., Bedrock v1.0. Computer software. https://www.osti.gov//servlets/purl/1568054. USDOE. 11 Sep. 2019. Web. doi:10.11578/dc.20191001.2. Link

 

Du, Qiang, et al. “Deterministic stabilization of eight-way 2d diffractive beam combining using pattern recognition.” Optics letters 44.18 (2019): 4554-4557, Link

 

Gaioni, Luigi, et al. “RD53 analog front-end processors for the ATLAS and CMS experiments at the High-Luminosity LHC.” 28th International Workshop on Vertex Detectors (Vertex 2019). Sissa Medialab, 2019. Link

 

Gaioni, Luigi, and RD53 Collaboration. “Test results and prospects for RD53A, a large scale 65 nm CMOS chip for pixel readout at the HL-LHC.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 936 (2019): 282-285. Link

 

Aartsen, M. G., et al. “Efficient propagation of systematic uncertainties from calibration to analysis with the SnowStorm method in IceCube.” Journal of Cosmology and Astroparticle Physics 2019.10 (2019): 048. Link

 

Aartsen, M. G., et al. “Search for sources of astrophysical neutrinos using seven years of IceCube cascade events.” The Astrophysical Journal 886.1 (2019): 12.Link

 

Aartsen, M. G., et al. “Neutrino astronomy with the next generation IceCube Neutrino Observatory.” arXiv preprint arXiv:1911.02561 (2019). Link

 

Aartsen, M. G., et al. “Detection of the temporal variation of the sun’s cosmic ray shadow with the IceCube detector.” The Astrophysical Journal 872.2 (2019): 133. Link

 

Aartsen, M. G., et al. “Search for non-relativistic magnetic monopoles with IceCube: IceCube Collaboration (vol 74, 2938, 2014).” EUROPEAN PHYSICAL JOURNAL C 79.2 (2019). Link

 

Aartsen, M. G., et al. “Erratum to: Search for annihilating dark matter in the Sun with 3 years of IceCube data.” The European Physical Journal C 79.3 (2019): 1-4. Link

 

Aartsen, M. G., et al. “Erratum to: Search for non-relativistic magnetic monopoles with IceCube.” The European Physical Journal C 79.2 (2019): 1-3. Link

 

Ciston, Jim, et al. “The 4D camera: very high speed electron counting for 4D-STEM.” Microscopy and Microanalysis 25.S2 (2019): 1930-1931. Link

 

Ferrario, Paola, et al. “Demonstration of the event identification capabilities of the NEXT-White detector.” Journal of High Energy Physics 2019.10 (2019): 1-20. Link

 

Garrappa, S., et al. “Investigation of two Fermi-LAT gamma-ray blazars coincident with high-energy neutrinos detected by IceCube.” The Astrophysical Journal 880.2 (2019): 103. Link

 

Grace, C. R., et al. “VASE: A 256-Channel Readout ASIC for Column-Parallel CCDs with 14b Dynamic Range.” 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE. Link

 

Kankare, Erkki, et al. “Search for transient optical counterparts to high-energy IceCube neutrinos with Pan-STARRS1.” Astronomy & Astrophysics 626 (2019): A117. Link

 

McDonald, A. D., et al. “Electron drift and longitudinal diffusion in high pressure xenon-helium gas mixtures.” Journal of Instrumentation 14.08 (2019): P08009. Link

 

The NEXT collaboration., Henriques, C.A.O., Monteiro, C.M.B. et al. “Electroluminescence TPCs at the thermal diffusion limit”. J. High Energ. Phys. 2019, 27 (2019). Link

 

Novella, P., et al. “Radiogenic backgrounds in the NEXT double beta decay experiment.” Journal of High Energy Physics 2019.10 (2019): 1-26.Link

 

Renner, Joshua, et al. “Energy calibration of the NEXT-White detector with 1% resolution near Qββ of 136Xe.” Journal of High Energy Physics 2019.10 (2019): 1-13. Link

 

O. Agazzi et al., (2019) “High-speed receiver architecture,” (U.S. Patent 10505638). U.S. Patent and Trademark Office, Link

 

Z. Ahmed et al., “New Technologies for Discovery,” arXiv preprint arXiv:1908.00194, (1 Aug. 2019), Link

 

Z. Ahmed et al., “A report of the 2018 DPF coordinating panel for advanced detectors (CPAD) community workshop,” Free radical biology & medicine, (31 Jul. 2019), Link

 

C. Chen et l., “A gigabit transceiver for the ATLAS inner tracker pixel detector readout upgrade,” JINST 14 C07005, (10 Jul. 2019), Link

 

C. Grace, T. Stezelberger and P. Denes, “PETAL: A Multichannel Differential ADC Driver for High-Speed CMOS Image Sensors,” in IEEE Transactions on Nuclear Science, vol. 66, no. 6, pp. 955-959, (June 2019). Link

 

N. Hasan, B. Hou and A. D. Radadia, “Ion Sensing With Solution-Gated Graphene Field-Effect Sensors in the Frequency Domain,” in IEEE Sensors Journal, vol. 19, no. 19, pp. 8758-8766, 1 October 2019. Link

 

Unzueta, Mauricio Ayllon, et al. “Position sensitive alpha detector for an associated particle imaging system.” AIP Conference Proceedings. Vol. 2160. No. 1. AIP Publishing LLC, 2019. Link

 

A. Dey, et al., (2019). “Overview of the DESI legacy imaging surveys.” The Astronomical Journal, 157(5), 168. Link

 

A. C. Metan, et al., “Small Scale Feature Propagation Using Deep Residual Learning for Diabetic Retinopathy Classification,” 2019 IEEE 4th International Conference on Image, Vision and Computing (ICIVC), 2019, pp. 392-396, doi: 10.1109/ICIVC47709.2019.8981096. Link

 

Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 

A. Papadopoulou, et al., “A 40mW/channel Image Sensor Line Driver IC with Independently Tunable Gain and Settling Time,” 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2019, pp. 1-2, doi: 10.1109/NSS/MIC42101.2019.9059766. Link

 

Anker, A., et al. “Neutrino vertex reconstruction with in-ice radio detectors using surface reflections and implications for the neutrino energy resolution.” Journal of Cosmology and Astroparticle Physics 2019.11 (2019): 030. Link

 

C. Serrano, et al. “Hardware-in-the-Loop Testing of Accelerator Firmware.” (2019). Link

 

Li, S., et al., (2019, December). Program objectives and specifications for the Ultra-Fast Astronomy observatory. In AOPC 2019: Space Optics, Telescopes, and Instrumentation (Vol. 11341, pp. 513-521). SPIE. Link

 

D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019. Link

 

T. Shen, et al., “Hazard Analysis and Operation Control of a Coupling-Loss Induced Quench System at the Magnet Test Facility at B58.” (July 2019). Link

 

Shen, Tengming, et al. “Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the wire current density of 1000 A/mm2.” Scientific reports 9.1 (July 2019): 1-9. Link

 

T. Shen, et al. “Stable, predictable operation of racetrack coils made of high-temperature superconducting Bi-2212 Rutherford cable at the very high wire current density of more than 1000 A/mm2.” arXiv preprint arXiv:1808.02864 (2019). Link

 

M. Turqueti, et al. Active cryogenic electronic envelope. No. 10,240,875. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019.Link

 

Caminata, Alessio, et al. “Results from the CUORE experiment.” Universe 5.1 (2019): 10, Link

 

Magnetics Engineering Department

D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605, doi: 10.1109/TASC.2019.2898595. Link
 

Brouwer, Lucas, et al. “User defined elements in ANSYS for 2D multiphysics modeling of superconducting magnets.” Superconductor Science and Technology 32.9 (2019): 095011.Link

 

G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906, doi: 10.1109/TASC.2019.2897326. Link

 

S. Yin, D. Arbelaez, J. Swanson and T. Shen, “Epoxy Resins for Vacuum Impregnating Superconducting Magnets: A Review and Tests of Key Properties,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019. Link

 

G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low- β Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019. Link

 

X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low-β Nb3Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706, doi: 10.1109/TASC.2019.2892119. Link

 

M. Duda et al., “Power Test of the Second-Generation Compact Linear Collider (CLIC) Nb3Sn Damping Wiggler Short Model,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100405, doi: 10.1109/TASC.2019.2896774. Link

 

M.Leitner, et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), (24 May 2019). Link

 

L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied https://ieeexplore.ieee.org/abstract/document/8630491, vol. 29, no. 5, pp. 1-5, Aug. 2019. Link

 

M. Juchno et al., “Mechanical Utility Structure for Testing High Field Superconducting Dipole Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-4, Aug. 2019. Link

 

H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019. Link

 

D. Schoerling et al., “The 16 T Dipole Development Program for FCC and HE-LHC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-9, Aug. 2019. Link

 

G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb 3 Sn Low- β Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019. Link

 

H. Felice et al., “F2D2: A Block-Coil Short-Model Dipole Toward FCC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 4001807. Link

 

Adams, D., et al. “First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment.” European Physical Journal C 79.3 (2019): 257. Link

 

Ferracin, Paolo, et al. “The HL-LHC low-β quadrupole magnet MQXF: from short models to long prototypes.” IEEE Transactions on applied superconductivity 29.5 (2019): 1-9 Link

 

Machicoane, G., et al. “Recent Advance in ECR Ion Sources.” (2019). Link

 

F. Pierro et al., “Finite-Element Analysis of the Strain Distribution Due to Bending in a REBCO Coated Conductor for Canted Cosine Theta Dipole Magnet Applications,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4600705. Link

 

F. Pierro, et al., “Measurements of the Strain Dependence of Critical Current of Commercial REBCO Tapes at 15 T Between 4.2 and 40 K for High Field Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 8401305. Link

 

Qiang, J., et al. “A phase shifter for multi-pass recirculating proton LINAC.” Proc. 10th Int. Part. Accel. Conf.. 2019. Link

 

Sanabria, Charlie, et al. “Further heat treatment optimizations for Nb 3 Sn conductors: From wires to cables.” IEEE Transactions on Applied Superconductivity 29.5 (2019): 1-4. Link

 

Shen, Tengming, et al. “Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the wire current density of 1000 A/mm2.” Scientific reports 9.1 (July 2019): 1-9. Link

 

M. Turqueti, et al. Active cryogenic electronic envelope. No. 10,240,875. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019.Link

 

X. Wang, et al., “Dipole magnets above 20 tesla: Research needs for a path via high-temperature superconducting REBCO conductors.” Instruments 3.4 (2019): 62, Link

 

X. Wang, et al. “A 1.2 T canted cosθ dipole magnet using high-temperature superconducting CORC® wires.” Superconductor Science and Technology 32.7 (2019): 075002, Link

 

X. Wang, et al. “Field Quality of HD3—A Nb3Sn Dipole Magnet Based on Block Design.” IEEE Transactions on Applied Superconductivity 29.5 (2019): 1-7 Link

 

Wei, Jie, et al. “Advances of the FRIB project.” International Journal of Modern Physics E 28.3 (2019): 1930003. Link

 

O. Malyshev, et al., “Vacuum Chamber at Cryogenic Temperatures.” Vacuum in Particle Accelerators: Modelling, Design and Operation of Beam Vacuum Systems (2019): 269-348. Link

 

C. Steier, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 

Manufacturing Engineering & CAD Department

D. Leitner, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link
 

M. Leitner, et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019.

 

D. Neben, et al. “X-ray investigation on the Superconducting Source for Ions (SuSI).” Journal of Instrumentation 14.02 (19 Feb 2019): C02008. Link

 

C. Steier, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 

A. White, et al. “A New Light for Berkeley Lab—the Advanced Light Source Upgrade.” Synchrotron Radiation News 32.1 (7 Feb 2019): 32-36. Link

 

D. Leitner, (USA Author) High Performance ECR Sources for Next-Generation Nuclear SCIENCE FACILITIES, Lawrence Berkeley National Laboratory,Berkeley, California USA. Link

 

Mechanical Engineering

C. Anderson, et al. “Overview and status of the 0.5 NA EUV microfield exposure tool at Berkeley Lab.” Extreme Ultraviolet (EUV) Lithography X. Vol. 10957. SPIE, 2019. Link
 

Huschke, et al. Permanent Magnet Dipole-Quadrupole and Correcto-Tuner for Small Bore Accelerators. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2019. Link

 

F. Lin, et al., “Heat Transfer Interface to Graphitic Foam.” ASME International Mechanical Engineering Congress and Exposition. Vol. 59452. American Society of Mechanical Engineers, 2019, Link

 

H. Pan, et al., “Failure Assessments for MQXF Magnet Support Structure With a Graded Approach,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-7, Aug. 2019, Art no. 8401507. Link

 

Schlegel, David J., et al. “Astro2020 APC White Paper: The MegaMapper: az> 2 spectroscopic instrument for the study of Inflation and Dark Energy.” arXiv preprint arXiv:1907.11171 (2019).Link

 

C. Steier, et al. “Design progress of ALS-U, the soft x-ray diffraction limited upgrade of the advanced light source.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia. 2019. Link

 

Duan, Yutong, et al. “Focal plate structure alignment of the Dark Energy Spectroscopic Instrument.” Journal of Astronomical Telescopes, Instruments, and Systems 5.1 (2019): 014003. Link

 

D. Corrigan, K. Sooknanan, J. Doyle, C. Lordan and A. Kokaram, “A Low-Complexity Mosaicing Algorithm for Stock Assessment of Seabed-Burrowing Species,” in IEEE Journal of Oceanic Engineering, vol. 44, no. 2, pp. 386-400, April 2019. Link

 

Y.D. Chuang, et al. “Momentum-resolved resonant inelastic soft X-ray scattering (qRIXS) endstation at the ALS.” Journal of Electron Spectroscopy and Related Phenomena (2019): 146897. Link

 

L. Garcia Fajardo et al., “Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002005. Link

 

Leitner, Daniela. “High Performance ECR Sources for Next-Generation Nuclear Science Facilities.” 10th International Particle Accelerator Conference, Melbourne, Australia, JACoW Publishing. 2019. Link

 

Leitner, Daniela, et al. “Removal and Installation Planning for the Advanced Light Source-Upgrade Project.” 10th Int. Particle Accelerator Conf.(IPAC’19), Melbourne, Australia, 19-24 May 2019. JACOW Publishing, Geneva, Switzerland, 2019. Link

 

Leitner, M., et al. Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project. No. thyplm1. SLAC National Accelerator Lab., Menlo Park, CA (United States), 2019. Link

 

I. Pong, L. D. Cooley, A. Lin, H. C. Higley and C. Sanabria, “Diameter Quality Control of Nb3Sn Wires for MQXF Cables in the USA,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 6001505. Link

 

H. Pan et al., “Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4100706. Link

 

Abbott, B. P., et al. “Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model.” Physical Review D 100.12 (4 Dec 2019): 122002. Link

 

Abbott, Benjamin P., et al. “Search for gravitational-wave signals associated with gamma-ray bursts during the second observing run of Advanced LIGO and Advanced Virgo.” The Astrophysical Journal 886.1 (21 Nov 2019): 75. Link

 

Abbott, B. P., et al. “Tests of general relativity with the binary black hole signals from the LIGO-Virgo catalog GWTC-1.” Physical Review D 100.10 (20 Nov 2019): 104036. Link

 

Barsotti, Lisa, et al. “Effects of transients in LIGO suspensions on searches for gravitational waves.” (2019). Link

 

Á. Fernández-Galiana et al., “A compact actively damped vibration isolation platform for optical experiments in ultra-high vacuum,” Jan. 2019, Link

 

D. Reitze et al., “The US Program in Ground-Based Gravitational Wave Science: Contribution from the LIGO Laboratory,” Mar. 2019. Link

 

S. Vitale, et al., “Improving astrophysical parameter estimation via offline noise subtraction for Advanced LIGO.” (2019). Link

 

D. Arbelaez et al., “Test Results for a Superconducting 28-GHz Ion Source Magnet for FRIB,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4100605. Link

 

R. Soufli, et al. “Optical constants of magnetron sputtered Pt thin films with improved accuracy in the N-and O-electronic shell absorption regions.” Journal of Applied Physics 125.8 (2019): 085106. Link

 

Soufli, Regina, et al. “Optical constants of magnetron sputtered Pt thin films with improved accuracy in the N-and O-electronic shell absorption regions.” Journal of Applied Physics 125.8 (2019). Link

 

Baltay, C. et al., The DESI Fiber View Camera System. United States: N. p., 2019. Web. Link

 

G. Montenero et al., “Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4002906. Link

 

S. Yin, et al., “Epoxy Resins for Vacuum Impregnating Superconducting Magnets: A Review and Tests of Key Properties,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 7800205. Link

 

Sun, Eric, et al., Safe assembly and installation of a flywheel. United States: N. p., 2019. Web. Link

 

A. Abada, et al. “HE-LHC: The high-energy large hadron collider.” The European Physical Journal Special Topics 228.5 (1 July 2019): 1109-1382. Link

 

A. Abada, et al. “FCC-hh: The hadron collider.” The European Physical Journal Special Topics 228.4 (1 July 2019): 755-1107. Link

 

A. Abada, et al. “FCC-ee: the lepton collider.” The European Physical Journal Special Topics 228.2 (1 June 2019): 261-623. Link

 

A. Abada, et al. “FCC physics opportunities.” The European Physical Journal C 79.6 (1 June 2019): 1-161. Link

 

S. Izquierdo,Bermudez, et al. “Mechanical analysis of the Nb3Sn 11 T dipole short models for the High Luminosity Large Hadron Collider.” Superconductor Science and Technology 32.8 (3 May 2019): 085012. Link

 

P. Ferracin et al., “Mechanical Analysis of the Collaring Process of the 11 T Dipole Magnet,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002705. Link

 

P. Ferracin et al., “The HL-LHC Low-β Quadrupole Magnet MQXF: From Short Models to Long Prototypes,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-9, Aug. 2019, Art no. 4001309. Link

 

C. Fichera, et al., “New Methodology to Derive the Mechanical Behavior of Epoxy-Impregnated Nb3Sn Cables,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 7, pp. 1-12, Oct. 2019, Art no. 8401912. Link

 

S. Izquierdo Bermudez et al., “Magnetic Analysis of the MQXF Quadrupole for the High-Luminosity LHC,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4901705. Link

 

A. Louzguiti et al., “Optimization of the Electromagnetic Design of the FCC Sextupoles and Octupoles,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000805. Link

 

F. Mangiarotti et al., “Test Results of the CERN HL-LHC Low-β Quadrupole Short Models MQXFS3c and MQXFS4,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4001705. Link

 

J. F. Troitino et al., “3-D Thermal-Electric Finite Element Model of a Nb3Sn Coil During a Quench,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4701306. Link

 

J. F. Troitino et al. “On the mechanical behavior of a Nb3Sn superconducting coil during a quench: Two-dimensional finite element analysis of a quench heater protected magnet.” Cryogenics 106 (2020): 103054. Link

 

G. Vallone et al., “Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb3Sn Low-β Quadrupole MQXF,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4002805. Link

 

G. Vallone et al., “Assembly of a Mechanical Model of MQXFB, the 7.2-m-Long Low-β Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-5, Aug. 2019, Art no. 4000605. Link

 
X. Wang et al., “Field Quality Measurement of a 4.2-m-Long Prototype Low- β Nb 3 Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project,” in IEEE Transactions on Applied Superconductivity, vol. 29, no. 5, pp. 1-6, Aug. 2019, Art no. 4000706. Link

Engineering Division 2017 Publications

This site will be updated on a regular basis. 

Electronics, Software, and Instrumentation Engineering Department

Bakalis, Christos, et al. ATLAS Muon DCS Upgrades and Optimizations. No. ATL-PHYS-SLIDE-2017-054. ATL-COM-PHYS-2017-099, 2017. Link
 

Luo, Tianhuan, et al. “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 1 Jan. 2017. Link

 

Atharifard, A., et al. “Per-pixel energy calibration of photon counting detectors.” Journal of Instrumentation 12.03 (3 Mar. 2017): C03085. Link

 

S. Bheesette et al., “Medipix3RX neutron camera for ambient radiation measurements,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-5. Link

 

CMS collaboration. “Search for single production of vector-like quarks decaying into ab quark and a W boson in proton-proton collisions at sqrt (s)= 13 TeV.” arXiv preprint arXiv:1701.08328 (2017). Link

 

Shamshad, M., et al. “Semi-analytic off-axis x-ray source model.” Journal of Instrumentation 12.10 (23 Oct. 2017): P10013. Link

 

V. Arsov, et al. “Design and Commissioning of the Bunch Arrival-Time Monitor for SwissFEL.” Proc. IBIC 2017 (2017). Link

 

P. Chevtsov, et al. “Bunch arrival time monitor control setup for SwissFEL applications.” ICALEPCS, 2017. Link

 

Doolittle, Larry. “Tutorial on Analog Signal Processing and Design for Low Noise LLRF Front Ends.” LLRF2017 Workshop, Barcelona, Spain. 2017. Link

 

Doolittle, Larry, et al. “High Precision RF Control For SRF Cavities In LCLS-II.” SRF Workshop 2017. 2017. Link

 

Z. Y., Lin, et al. “The Preliminary Performance of the Timing and Synchronization System at Tsinghua University.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). May 2017. Link

 

Ma, Hengjie, et al. “An Internet Rack Monitor-Controller for APS LINAC RF Electronics Upgrade.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 2017. Link

 

Serrano, C., L. Doolittle, and V. Vytla. “Cryomodule-on-chip simulation engine.” Proc. ICALEPCS. 2017. Link

 

Serrano, Carlos, et al. “Design and Implementation of the LLRF System for LCLS-II.” Proceedings of ICALEPCS2017, Barcelona, Spain (2017): 1969-1974. Link

 

Wilcox, Russell, et al. “Interferometer design and controls for pulse stacking in high power fiber lasers.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 6 March 2017. Link

 

Y. Xu et al., “FPGA-Based Optical Cavity Phase Stabilization for Coherent Pulse Stacking,” in IEEE Journal of Quantum Electronics, vol. 54, no. 1, pp. 1-11, Feb. 2018, Art no. 1600111. Link

 

Xu, Yilun, et al. “FPGA Control of Coherent Pulse Stacking.” North American Particle Accelerator Conf.(NAPAC’16), Chicago, IL, USA, October 9-14, 2016. JACOW, Geneva, Switzerland, 2017. Link

 

Y. Yang et al., “A Pulse-Pattern-Based Phase-Locking Method for Multi-cavity Coherent Pulse Stacking,” in Conference on Lasers and Electro-Optics, OSA Technical Digest (online) (Optica Publishing Group, 2017), paper SM4I.3. Link

 

Yang, Y., et al. “Multicavity coherent pulse stacking using Herriott cells.” North American Particle Accelerator Conference (NAPAC). 2017. Link

 

Abt, Iris, et al. “Fast neutron detector data analysis, MC simulation and preliminary result in the context of Minidex.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 

Kneissl, Raphael, et al. “The Minidex experiment for the measurement of muon-induced neutrons.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 

Yang, J., Du, YC., Yan, LX. et al. Laser–RF synchronization based on digital phase detector. NUCL SCI TECH 28, 57 (2017). Link

 

Auger, M., A. Ereditato, and J. R. Sinclair. ArgonCube: A modular approach for liquid argon TPC neutrino detectors for near detector environments. No. CERN-SPSC-2017-025. 2017. Link

 

Carney, Rebecca, et al. “FE65-P2. A prototype pixel readout chip in 65 nm technology for HL-LHC upgrades.” Verhandlungen der Deutschen Physikalischen Gesellschaft (2017). Link

 

Casas, LM Jara, et al. “Study of Total Ionizing Dose Effects in 65nm Digital Circuits with the DRAD Digital RADiation Test Chip.” 2017 17th European Conference on Radiation and Its Effects on Components and Systems (RADECS). IEEE, 2017. Link

 

Casas, LM Jara, et al. “Characterization of radiation effects in 65 nm digital circuits with the DRAD digital radiation test chip.” Journal of Instrumentation 12.02 (10 Feb 2017): C02039. Link

 

Gaioni, Luigi, et al. “Design of analog front-ends for the RD53 demonstrator chip.” PoS (Sept 2017): 036. Link

 

Aartsen, Mark G., et al. “The IceCube Neutrino Observatory: instrumentation and online systems.” Journal of Instrumentation 12.03 (Mar. 2017): P03012. Link

 

Aartsen, Mark G., et al. “PINGU: a vision for neutrino and particle physics at the South Pole.” Journal of Physics G: Nuclear and Particle Physics 44.5 (Apr. 2017): 054006. Link

 

Renner, Joshua, et al. “Background rejection in NEXT using deep neural networks.” Journal of Instrumentation 12.01 (Jan. 2017): T01004. Link

 

C. Grace, E. Fong, D. Gnani, T. Stezelberger, H. v. d. Lippe and P. Denes, “A Modular Architecture for the Semi-Automatic Design and Layout of Pipelined ADC Arrays,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 21. Oct. 2017, pp. 1-4. Link

 

I. J. Johnson et al., “Development of a fast framing detector for electron microscopy,” 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 10. Oct. 2016, pp. 1-2. Link

 

N. Hasan, et al., “Few-flakes reduced graphene oxide sensors for organic vapors with a high signal-to-noise ratio.” Nanomaterials 7.10 (2017): 339. Link

 

M. K. Covo et al., “88-Inch Cyclotron: The one-stop facility for electronics radiation testing,” 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2017, pp. 484-488. Link

 

Conti, Elia, et al. “Development of a large pixel chip demonstrator in RD53 for ATLAS and CMS upgrades.” PoS (2017): 005. Link

 

Krieger, Amanda, et al. “A micropower readout ASIC for pixelated liquid Ar TPCs.” Topical Workshop on Electronics for Particle Physics. 2017. Link

 

Saito, Yoshifumi, et al. “High-speed MCP anodes for high time resolution low-energy charged particle spectrometers.” Journal of Geophysical Research: Space Physics 122.2 (2017): 1816-1830. Link

 

S. W. Barwick, et al. “Radio detection of air showers with the ARIANNA experiment on the Ross Ice Shelf.” Astroparticle Physics 90 (2017): 50-68. Link

 

T. Prakash, A fully-synchronous multi-GHz analog waveform recording and triggering circuit. University of California, Irvine, 2017. Link

 

C. Serrano, et al., “Cryomodule-on-chip simulation engine.” Proc. ICALEPCS. 2017. Link

 

C. Serrano, et al., “Design and Implementation of the LLRF System for LCLS-II.” Proceedings of ICALEPCS2017, Barcelona, Spain (2017): 1969-1974. Link

 

C. Grace, et al., “A Modular Architecture for the Semi-Automatic Design and Layout of Pipelined ADC Arrays,” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-4. Link

 

T. Stezelberger, et al., “Modeling the energy and timing digital signal processing for the Gamma Ray Energy Tracking In-Beam Array (GRETINA),” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-6. Link

 

N. C. Andresen, et al. “A 5-μ m pitch charge-coupled device optimized for resonant inelastic soft X-ray scattering.” Review of Scientific Instruments 88.8 (2017): 083103. Link

 

Q. Ji, et al. “Note: Coincidence measurements of 3He and neutrons from a compact DD neutron generator.” Review of Scientific Instruments 88.5 (2017): 056105. Link

 

Bucci, C., et al. “The Faraday room of the CUORE experiment.” Journal of Instrumentation 12.12 (17 Dec. 2017): P12013. Link

 

C.J. Bebek, J.H. Emes, D.E. Groom, S. Haque, S.E. Holland, P.N. Jelinsky, A. Karcher, W.F. Kolbe, J.S. Lee, N.P. Palaio, D.J. Schlegel, G. Wang, R. Groulx, R. Frost, J. Estrada and M. Bonati, “Status of the CCD development for the Dark Energy Spectroscopic Instrument”, 2017. Link

 

Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 2017. Link

 

S., Copello, et al., “The commissioning of the CUORE experiment: the mini-tower run”, PoS, NEUTEL2017, 072, September 2017. Link

 

V.,Novati, et al., “CUORE: first results and prospects,” PoS,NuFact2017, 164, 2017. Link

 

T. Stezelberger, M. Schütt, S. Zimmermann, M. Bantel, C. M. Campbell and M. Cromaz, “Modeling the energy and timing digital signal processing for the Gamma Ray Energy Tracking In-Beam Array (GRETINA),” 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2017, pp. 1-6. Link

 

Magnetics Engineering Department

L. Brouwer, D. Arbelaez, S. Caspi, M. Marchevsky and S. Prestemon, “Improved Modeling of Canted–Cosine–Theta Magnets,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4001006. Link
 

DeMello, Allan, et al. “Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 

Lauer, Kenneth, et al. “LCLS-II undulator motion control.” Proc. 16th Int. Conf. Accel. Large Experim. Phys. Control Syst.. Oct. 2017. Link

 

Scharfstein, G. A., Diego Arbelaez, and J. Jung. “An Endstation with Cryogenic Coils Contributing to a 0.5 Tesla Field and 30-400k Sample Thermal Control.” 9th Edition of the Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference (MEDSI’16), Barcelona, Spain, 11-16 September 2016. JACOW Publishing, Geneva, Switzerland, 1 June 2017. Link

 

E. F. Holik et al., “Fabrication of First 4-m Coils for the LARP MQXFA Quadrupole and Assembly in Mirror Structure,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4003605. Link

 

E. F. Holik et al.”Two-layer 16 Tesla cosθ dipole design based on MQXF low-β quadrupoles.” (2017). Link

 

Stoynev, Stoyan, et al. “Summary of test results of MQXFS1—The first short model 150 mm aperture Nb3Sn quadrupole for the high-luminosity LHC upgrade.” IEEE Transactions on Applied Superconductivity 28.3 (12 Dec 2017): 1-5. Link

 

Vallone, Giorgio, et al. “Mechanical Design Analysis of MQXFB, the 7.2-m-Long Low- β Quadrupole for the High-Luminosity LHC Upgrade.” IEEE Transactions on applied superconductivity 28.3 (4 Dec 2017): 1-5. Link

 

Leitner, Matthaeus, et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 1 May 2017, Link

 

Ray, K. L., et al. “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 

Wallén, E., et al. “Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project.” (2017), Link

 

M. Juchno et al., “Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-6, April 2018, Art no. 4602806. Link

 

X. Wang, D. Arbelaez, S. Caspi, S. O. Prestemon, G. Sabbi and T. Shen, “Strain Distribution in REBCO-Coated Conductors Bent With the Constant-Perimeter Geometry,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 8, pp. 1-10, Dec. 2017, Art no. 6604010. Link

 

Manufacturing Engineering & CAD Department

Doyle, J. A., et al. “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link
 

Leitner, M., et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 2017. Link

 

Mechanical Engineering Department

Y. Chuang, et al. “Modular soft x-ray spectrometer for applications in energy sciences and quantum materials.” Review of Scientific Instruments 88.1 (2017): 013110. Link
 

Takakuwa, Jeffrey, et al. “Fabrication, Assembly, And Metrology Methods To Opti-Mize An Adjustable Exit Slit For A Soft X-Ray Beamline.” 9th Edition of the Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference (MEDSI’16), Barcelona, Spain, 11-16 September 2016. JACOW Publishing, Geneva, Switzerland, 2017. Link

 

Doyle, J. A., et al. “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 

Androic, D., et al. “Qweak: First Direct Measurement of the Proton’s Weak Charge.” EPJ Web of Conferences. Vol. 137. EDP Sciences, 22 March 2017. Link

 

Etxeberria, Julen, and Jeong Han Lee. “EtherCAT based DAQ system at ESS.” (2017). Link

 

S. Farina, et al. “MicroTCA generic data acquisition systems at ESS.” Proc. of International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS’17), Barcelona, Spain. No. 16. October 2017. Link

 

García, J. Cereijo, et al. “Timing system at ESS.” Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’17). May 2017. Link

 

D. B. Ríos, et al. “New Measurements of the Beam Normal Spin Asymmetries at Large Backward Angles with Hydrogen and Deuterium Targets.” Physical Review Letters 119.1 (July 2017): 012501. Link

 

Thomas, Cyrille, et al. “Design and implementation of non-invasive profile monitors for the ESS LEBT.” Proc. IBIC 16 (1 February 2017): 551-554. Link

 

Lauer, Kenneth, et al. “LCLS-II undulator motion control.” Proc. 16th Int. Conf. Accel. Large Experim. Phys. Control Syst.. Oct. 2017. Link

 

Leitner, Matthaeus, et al. “Hard X-ray and soft X-ray undulator segments for the linear coherent light source upgrade (LCLS-II) project.” Proc. 8th Int. Particle Accelerator Conf.(IPAC’17). 1, May 2017. Link

 

Ray, K. L., et al. “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 

Wallén, E., et al. “Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project.” (2017). Link

 

B. P. Abbott et al., “First low-frequency Einstein@Home all-sky search for continuous gravitational waves in Advanced LIGO data,” Physical Review D, vol. 96, no. 12, p. 122004, Dec. 2017. Link

 

B. P. Abbott et al., “GW170608: Observation of a 19 Solar-mass Binary Black Hole Coalescence,” The Astrophysical Journal, vol. 851, no. 2, p. L35, Dec. 2017. Link

 

B. P. Abbott et al., “First narrow-band search for continuous gravitational waves from known pulsars in advanced detector data,” Physical Review D, vol. 96, no. 12, p. 122006, Dec. 2017. Link

 

Abbott, Benjamin P., et al. “Search for post-merger gravitational waves from the remnant of the binary neutron star merger GW170817.” The Astrophysical Journal Letters 851.1 (7 Dec 2017): L16. Link

 

Abbott, Benjamin P., et al. “On the progenitor of binary neutron star merger GW170817.” The Astrophysical Journal Letters 850.2 (1 Dec 2017): L40. Link

 

Abbott, Benjamin P., et al. “Estimating the contribution of dynamical ejecta in the kilonova associated with GW170817.” The Astrophysical Journal Letters 850.2 (1 Dec 2017): L39. Link

 

Abbott, Benjamin P., et al. “A gravitational-wave standard siren measurement of the Hubble constant.” arXiv preprint arXiv:1710.05835 (16 Oct. 2017). Link

 

Abbott, Benjamin P., et al. “Upper limits on gravitational waves from Scorpius X-1 from a model-based cross-correlation search in advanced LIGO data.” The Astrophysical Journal 847.1 (2017): 47. Link

 

Abbott, Benjamin P., et al. “GW170814: a three-detector observation of gravitational waves from a binary black hole coalescence.” Physical review letters 119.14 (6 Oct. 2017): 141101. Link

 

Abbott, Benjamin P., et al. “All-sky search for periodic gravitational waves in the O1 LIGO data.” Physical Review D 96.6 (2017): 062002. Link

 

Matichard, Fabrice, et al. “Advanced LIGO two-stage twelve-axis vibration isolation and positioning platform. Part 1: Design and production overview.” Precision Engineering 40 (2015): 273-286. Link

 

Walker, Mia, et al. “Effects of transients in LIGO suspensions on searches for gravitational waves.” Review of Scientific Instruments 88.12 (2017): 124501. Link

 

Wen, Linqing, LIGO Scientific Collaboration, and Virgo Collaboration. “VizieR Online Data Catalog: Gravitational waves search from known PSR with LIGO (Abbott+, 2017).” (1 Nov 2017). Link

 

DeMello, Allan, et al. “Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments.” 8th Int. Particle Accelerator Conf.(IPAC’17), Copenhagen, Denmark, 14â 19 May, 2017. JACOW, Geneva, Switzerland, 2017. Link

 

Steier, Christoph, et al. R+ D progress towards a diffraction limited upgrade of the ALS. No. LBNL-1007077. Lawrence Berkeley National Lab.(LBNL), Berkeley, CA (United States), 2017. Link

 

Ruminski, Anne M., et al. “Geometric analysis of enhanced thermal conductivity in epoxy composites: A comparison of graphite and carbon nanofiber fillers.” physica status solidi (a) 214.1 (2017): 1600368. Link

 

Toth, Csaba, et al. “Transition of the BELLA PW laser system towards a collaborative research facility in laser plasma science.” AIP Conference Proceedings. Vol. 1812. No. 1. AIP Publishing LLC, 2017. Link

 

R. Qiao et al. “High-efficiency in situ resonant inelastic x-ray scattering (iRIXS) endstation at the Advanced Light Source.” Review of Scientific Instruments 88.3 (2017): 033106. Link

 

M. K. Covo et al., “88-Inch Cyclotron: The one-stop facility for electronics radiation testing,” 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), June 2017, pp. 484-488. Link

 

Anerella, M., et al. MQXFS1 Quadrupole Fabrication Report. No. FERMILAB-TM-2660-TD. 16 Jul. 2017, Link

 

G. Chlachidze et al., “Performance of the First Short Model 150-mm-Aperture Nb3Sn Quadrupole MQXFS for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4000205. Link

 

S. Izquierdo Bermudez et al., “Magnetic Analysis of the Nb3Sn Low-Beta Quadrupole for the High-Luminosity LHC,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4001905. Link

 

H. Pan et al., “Mechanical Design Studies of the MQXF Long Model Quadrupole for the HiLumi LHC,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, pp. 1-5, June 2017, Art no. 4004105. Link

 

Sacristan De Frutos, Oscar, et al. JACoW: Characterisation of the Mechanical Behaviour of Superconducting Cables Used in High Field Magnets From Room Temperature Down to 77K. (May 2017), No. CERN-ACC-2017-242. 2017. Link

 

S. Stoynev et al., “Summary of Test Results of MQXFS1—The First Short Model 150 mm Aperture Nb3Sn Quadrupole for the High-Luminosity LHC Upgrade,” in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, 12 Dec 2017, Art no. 4001705. Link

 

G. Vallone and P. Ferracin, “Modeling Coil-Pole Debonding in Nb3Sn Superconducting Magnets for Particle Accelerators,” in IEEE Transactions on Applied Superconductivity, vol. 27, no. 8, pp. 1-11, Dec. 2017, Art no. 4004611. Link

 

Vallone, Giorgio, et al. “Mechanical performance of short models for MQXF, the Nb3Sn low-β quadrupole for the Hi-Lumi LHC.” IEEE Transactions on applied superconductivity 27.4 (June 2017): 1-6. Link

Water Leak Prevention (Infrastructure/Equipment)

If this is an URGENT matter (imminent flooding), please call the Plant Maintenance Technicians at (510) 486-5481, staffed 24/7. Otherwise, please complete this form, and a representative will respond within 12 hours.
 
At Berkeley Lab, we operate in a complex environment full of expensive equipment, delicate research, and many potential hazards. Some of the most underrated hazards involve utilities such as water, gases, and electricity.

Researchers have a responsibility to establish a regular equipment inspection process and to perform regular inspections and preventative maintenance of equipment utilized in their research.

On at least a quarterly basis, conduct an inspection of all equipment and connections.

  • Check connections from utilities (water and gases) to all equipment not in use. Close off any connections from sources of pressure.
  • Check all tubing and connections between equipment and utilities for wear, age, damage.
  • Replace connections and tubing if their condition is suspect.
  • For equipment that is operating unattended, make sure that all tubing and connections between equipment and utilities are checked for wear, age, damage, and replaced if needed.
  • Include regular inspection of tubing, hoses and connections, valves and leak detectors in a periodic maintenance plan. If any of the parts are deficient or suspect they should be replaced prior to operating.
  • Check that fittings are appropriate and that clamps are tight. Clamps can loosen over time and should be periodically checked for tightness.
  • Request assistance for equipment inspections, improvements, repairs, or upgrades using the Water Assistance Request Form.
  • Request assistance from Facilities with isolation valves if not sure they are closing/opening correctly, or if unable to reach the valves safely.
  • Schedule more frequent inspections for older equipment, which is at greater risk of breakdown.

Follow established protocols for equipment service or repair.

Resources

Marcos Turqueti, Early Career Research Program Award (2021)

Marcos Turqueti is an electronics research engineer in the Engineering Division of the Physical Sciences Area. He researches low-temperature electronics for the instrumentation of superconductive magnets and develops control and diagnostic systems for the Magnet Development Program. He also develops electronics for the Neutrino Astrophysics Group and the Applied Nuclear Physics program at Berkeley Lab.
 
His award is to develop an electron beam magnetic field mapping technology for undulators and magnets, such as the undulators planned for the Advanced Light Source Upgrade at Berkeley Lab. Current magnetic field measurement technologies have limitations and require frequent recalibration. This project proposes a paradigm shift, aiming to develop a novel sensing technology based on a micro-Cathode Ray Tube (mCRT) integrated with an image sensor. This state-of-the-art magnetometer will eliminate the limitations of current systems and improve magnetic metrology in the future.
 
Read more here
 
 
 
 

In Remembrance of James (Jim) E. Galvin, 1945 – 2021

By Will Waldron, Joseph Chew and Kathy Bjornstad

James (Jim) E. Galvin, Sr. Electronics Engineering Associate, in Berkeley Lab’s Engineering Division, passed away March 3, 2021 at age 76.

Even at a lab known for long careers and for the invaluable technologists and engineers who help make team science happen, Jim’s accomplishments and dedication stood out.  Across 42 years of service at the Lab, (and he continued as a retired affiliate part time, over the course of the past 7 years), he contributed to efforts that ranged from energy-efficient lighting to neurons on a chip.  He was associated longest and most closely with ion-source development and applications in ATAP’s predecessor, the Accelerator and Fusion Research Division.

Jim’s contributions in retirement continued as he assisted the Ion Beam Technology Program, the NDCX-II heavy-ion accelerator facility, and the ALS Upgrade Project.  Over the last several years, Jim’s contributions have been critical to the MOSFET-based inductive voltage adder pulsers used to drive the stripline kickers that will be crucial to ALS-U.

It was the culmination of a career that began in 1971, when he was recruited to work on a team led by another Berkeley Lab engineering legend, Bill Baker, that was developing neutral-beam injection systems for heating and plasma confinement in magnetic fusion energy experiments.  Jim’s other early efforts included helping develop ion sources for the SuperHILAC, a heavy-ion linear accelerator famed as the discovery site of several elements.

Jim developed broad experience with RF and pulsed electronics as well as with careful measurement techniques—an invaluable skill set at an accelerator lab.  He also amassed a vast collection of microscope hardware, light calibration equipment, and electronics calibration equipment, which he used to help many groups take high-quality measurements.

His interest in optics led him to the Windows and Daylighting Group in what was then the Energy and Environment Division, which needed precision measurements of light.  Among other contributions, he was an early adopter of high dynamic range (HDR) techniques, now familiar in consumer products but then at the cutting edge.   

Patterned Arrays of Neurons on CCD Chips

The Neural Matrix CCD team of (l-r) James Galvin, Eleanor A. Blakely, Kathleen A. Bjornstad, Chris J. Rosen, Ian G. Brown, (not pictured Othon Monteiro) 2005.  (Berkeley Lab/Roy Kaltschmidt)

In a crossover from his usual work for Ian Brown in the Plasma Applications Group, he also contributed his imaging skills to Life Sciences Division researchers with the Neural Matrix CCD.  A spinoff of the group’s work on biocompatible diamondlike-carbon (DLC) coatings, it enabled biologists to  learn how neurons in the human nervous system communicate.  Other potential uses for this technology include cultivating interconnected nerve cells for testing drugs, or for sensing toxins, and someday it may even play a role in restoring the use of limbs and eyesight.  The development was honored with an R&D 100 Award in 2005 and one of the five patents on which he was a co-inventor.

Jim had particular expertise in designing low-noise instrumentation and RF amplifiers. His career spanned the years from analog to the advent and growth of digital technologies. The latter became more and more prominent, and he eagerly embraced these new developments.  He became a prolific designer of a wide variety of printed-circuit boards for many applications, from early field-programmable gate array (FPGA)-based digital electronics to custom high-voltage switching electronics and diagnostics.

Jim (l.) as mentor, making calibrated light measurements with Center for Science and Engineering Education student Michael DeChenne, 2008 (Berkeley Lab/Roy Kaltschmidt)

Jim’s professional interests in optics and imaging, as well as his friendliness and willingness to help others, carried over into his personal life, where he introduced many people to the wonders of science.  Not even the urban lights and frequent cloud cover of the inner Bay Area deterred him from sidewalk astronomy and the accompanying public outreach at his home in the Watergate Emeryville complex. He also helped organize art shows at the Watergate’s Clipper Club, and was known for generously sharing his time, expertise, and high-tech tools and toys.    

The dark nighttime skies, clear dry air, and unique scenery of Death Valley saw several of Jim’s interests in full flower.  Spending one or two months there every winter, he became the unofficial scientist-in-residence of the Stovepipe Wells Hotel, showing other visitors the secrets of the night sky or switching to a microscope to examine minerals. 

As Jim recalled, “One night I had my telescope set up on the moon, and many people stopped by.  One said she had a group of geology students, camping across the road, and asked, could they look.  Of course!  So the next night they started arriving.  There were 45 high school students.  There were clouds, but I had brought a differential interference contrast or Nomarski microscope, so I showed them protozoa and bacteria from Salt Creek.  I also showed them crystals with polarized light.  The next night was clear, so I showed them the moon and the pics I had taken of the Orion Nebula and the Andromeda Galaxy.  They were amazed.  As they were leaving a few days later I went over to their camp and gave their leader some of my postcards.  She thanked me, and I got a round of applause.  They wanted to make sure I would be there next year.”

By day as well as night, Death Valley was also an inspiring location for one of his other passions, photography, including large-format work.  Several of his pictures are on display at the hotel.  So many people have expressed their appreciation of working with Jim and his love of science and discovery.  A life well lived, and he will be missed by many.

https://sites.google.com/a/lbl.gov/lbnl-photography-club/_/rsrc/1541537318755/winners/badwater.png

“Badwater,” a 2013 LBNL Photography Club winner. (Jim Galvin)

Ergo Improvements Make Positive Impact

In FY17, computer ergonomic (ergo) exposure was the second highest recordable injury, accounting for 22% of the Laboratory’s recordable injuries. To address this problem head on, the Engineering Division Ergo Advocate Team has implemented a proactive approach to reducing ergo risks in the division.

Each week since June, the ergo duo, Eva Pan and Marshall Granados, review ergonomics reports to prioritize and target employees identified as high and moderate risk for ergonomic injury. Starting with the individuals at the highest risk level and with the highest number of ergo issues, they initially conduct drop-in visits  for a casual ergo safety discussion and to offer recommendations to reduce ergo risk. Working as a team, they are able to discuss issues with the employee, make and document observations, and make workstation adjustments during the visit. If a drop-in visit proves to be ineffective or inconvenient, they calendar a formal meeting with the employee. Each employee is visited at least twice to offer recommendations and monitor progress towards implementation and improvement of fatigue or discomfort.

Since the implementation of this new approach to ergo risk management, high risk ergo instances have been eliminated and moderate instances have been reduced by 46%. Out of 245 employees, the percentage of low risk employees has increased from 89% to 95%. The team continues initiate contact and work with the remaining 5% of employees who remain at the moderate risk level, some of which have chronic ergo issues that are being actively managed.

Not only have the numbers improved, but actively managing ergo risks has also had a positive effect on employee morale. Employees have expressed appreciation that their well-being is being considered. One employee stated, “I’m not used to people caring about me, only my output and the work that I do.”

While doing an assessment, the ergo duo discovered that the ergo risk they were assessing for one employee actually impacted the entire control room used by several employees in multiple divisions. Six workstations used the same obsolete, unadjustable chairs that required users to hunch to perform their work. In some cases, the employees spent more time at these workstations than they spent at their desks. In result of actions prompted by the initial ergo assessment of one employee, all six workstations are scheduled to be upgraded to current ergo standards, eliminating the ergo hazard for the group.

Though this project began as a way to reduce the ergo risk in the division, the benefits have reached beyond what was anticipated. The team approach promotes continuous progress and the partner-accountability helps to maintain consistency. Additionally, safety and morale of employees has improved and spills over into adjacent workspaces. With this new proactive approach to managing ergo risks, we hope to eliminate preventable ergonomic injuries in the division.

Schedule Photo Session

Engineering Division employees are encouraged to get a head shot taken. Employee photos are used for various purposes including: photo boards, seating charts, org charts, presentations, etc. Use the link below to schedule an appointment to have your photo taken.

https://calendar.google.com/calendar/selfsched?sstoken=UU1GaDlNamw2T1pRfGRlZmF1bHR8YzQxODE0OWU5MzBkNjMzNTMyOWJkMTUyYmUxYzQ3NDc

Arnaud Madur, Berkeley Lab Director’s Exceptional Achievement Award (2015)

The ALS Brightness Upgrade Team led the largest improvement of the Advanced Light Source (ALS) storage ring since the facility was built in 1993. The brightness improvement enables experiments at the ALS to be executed more quickly and with better spatial and spectral resolution. Mechanical Engineer, Arnaud Madur, was the lead engineer for the team that led the emittance upgrade. Christoph Steier (Accelerator Technology and Applied Physics Division) and Arnaud Madur received a Berkeley Lab Director’s Exceptional Achievement Award in the Scientific category for their scientific achievement in improving the performance of the ALS beamlines.
More >

Lee Yang, Berkeley Lab Director’s Exceptional Achievement Award (2015)

 A collaboration of experts from Berkeley Lab, Brookhaven National Laboratory, the University of San Diego, and Uppsala University broke the world record, achieving 3nm resolution with X-ray microscopy. The team built a new microscope based on ptychography, a novel mode imaging technique that uses high-performance scanning transmission X-ray microscopy. This capability is an important tool for energy sciences, as demonstrated in initial work on lithium iron phosphate batteries. Software Engineer, Lee Yang, was a member of the Berkeley Lab team that included Rich Celestre, David Kilcoyne, Stefano Marchesini, David Shapiro, Tolek Tyliszczak, and Tony Warwick. The team won the Berkeley Lab Director’s Exceptional Achievement Award in the Scientific category for their scientific advancements.
More >

LUX-ZEPLIN (LZ)

Sanford Underground Research Facility (SURF), Lead, South Dakota

The LUX-ZEPLIN (LZ) experiment utilizes 7 tonnes of active liquid xenon to search for xenon nuclei that recoil in response to collisions caused by an impinging flux of dark matter particles known as WIMPs (Weakly Interacting Massive Particles).  The experiment will be located nearly 1 mile underground in the Sanford Underground Research Facility (SURF) in Lead, South Dakota. The active liquid xenon is configured in a cylinder 1.5 meters in diameter and height, with an applied electric field to form a TPC (Time Projection Chamber).

Source: http://lz.lbl.gov/detector/

STAR Heavy Flavor Tracker

STAR Heavy Flavor Tracker

Brookhaven National Laboratory, Upton, NY

The Heavy Flavor Tracker (HFT) is a vertex detector which is part of the STAR (Solenoid Tracker at RHIC) detector located at the RHIC (Relativistic Heavy Ion Collider) accelerator. The HFT detector is designed to detect particles containing heavy quarks by measuring their extremely short decay vertexes. It consists of 4 silicon detection layers; the inner two layers are PXL, followed by IST and SSD as the outer layer. PXL uses novel pixilated sensors with high resolution and low mass that achieve breakthrough performance results. IST and SSD are used to point the tracks between PXL and the STAR TPC (Time Projection Chamber). Scientists and engineers at Berkeley Lab have played a major role in the design of both PXL and SSD.

 

More Info:

http://newscenter.lbl.gov/2014/02/18/heavy-flavor-tracker-for-star/
http://science.energy.gov/np/highlights/2015/np-2015-03-a/

Pictured: Berkeley Lab Engineers, Thorsten Stezelberger and Luis Ardila-Perez

Photo Credit: Jim Thomas, SSD subsystem manager

APEX

Berkeley Lab’s Advanced Photon Injector Experiment - APEX at the Advanced Light Source (ALS).

Advanced Light Source (ALS), Lawrence Berkeley National Laboratory, Berkeley, CA

The Advanced Photo-injector EXperiment (APEX) is dedicated to demonstrating the capability of an electron injector based on a new concept RF gun developed at Berkeley Lab to deliver the beam quality required by next generation free electron laser (FEL) facilities. The APEX gun is a normal-conducting continuous wave (CW) RF gun where electrons are generated by laser-induced photo-emission on high quantum efficiency (QE) cathodes. The electrons are subsequently accelerated up to the nominal energy of 750 keV. The low frequency makes the resonator size large enough to lower the power density on the cavity walls at a level that conventional cooling techniques can be used to run in CW mode, while maintaining the high accelerating fields required for the high brightness performance. In addition, the low frequency allows to use large apertures on the cavity walls without significant field distortion, therefore enabling efficient vacuum pumping and prolonging the lifetime of the sensitive high QE photo cathodes. The gun cavity resonates at 186 MHz, the 7th sub-harmonic of 1.3 GHz or the 8th sub-harmonic of 1.5 GHz, the two dominant superconducting linac technologies for next generation FEL facilities.

ABPDU Advanced Technologies

ABPDU Bioreactor

Advanced Biofuels Process Demonstration Unit (ABPDU) – Lawrence Berkeley National Laboratory, Emeryville, CA

ABPDU enables early stage advanced biofuels, biomaterials, and biochemicals product and process technologies to successfully scale from the lab to commercial relevance. The facilities at ABPDU are constantly adapted and new process algorithms developed to support various client and project requirements. The Engineering Division manages a number of electronic and mechanical engineering endeavors including developing and maintaining data and control systems, designing automation, monitoring environmental compliance, and modifying custom equipment (i.e., fermenters and biological reactors) to perform specialized processes. The advanced customization engineered at the ABPDU enables the program to offer unique capabilities for advanced research in bioproduction.

More Information>>

LCLS-II

Linac Coherent Light Source II (LCLS-II) – SLAC National Accelerator Laboratory Stanford University, Menlo Park, CA

LCLS-II is the upgrade of the Linac Coherent Light Source (LCLS) national user facility. LCLS is a powerful x-ray laser that enables exploration of atomic motion and changes in chemical bonds. The upgrade will add two new X-ray laser beams and expand the capacity for more instruments and research experiments. Berkeley Lab is leading the design and production of the injectors and undulators for the facility upgrade.

MICE

Projects-MICE01

Rutherford Appleton Laboratory (RAL), UK

The  Muon Ionization Cooling Experiment (MICE) is a high-energy physics experiment formed to demonstrate ionization cooling in a short section of a realistic cooling channel using a muon beam. The Berkeley Lab is responsible for designing and procuring the RF, RF cavities, superconducting magnets, conducting the thermal and structural analyses, and designing the Spectrometer Solenoid modules.

More Info >>

BeLLA

Projects-BELLA_LASER_BAY_PHOTO

Lawrence Berkeley National Laboratory, Berkeley, CA
Berkeley Lab Laser Accelerator (BeLLA) is a world-record-setting laser system and state-of-the-art scientific facility for the advancement of laser plasma acceleration research. In 2014, the project won a DOE Secretary’s Achievement Award “for outstanding ingenuity and exceptional project performance.” The Engineering Division was responsible for the project management and all of the opto-mechanical systems, electrical and controls systems, and the site and systems integration of the BeLLA project.

More Info >>

Amanda Krieger, Director’s Award for Exceptional Achievement in Diversity (2017)

Amanda Krieger, Engineering Division IC Design Engineer, was awarded the 2017 Director’s Award for Exceptional Achievement in Diversity. The Director’s Awards program recognizes significant achievements of Lab employees. Each year, these awards are given for accomplishments, leadership, collaboration, multi-disciplinary science, cross-divisional projects, and commitment to excellence in support of the Lab’s mission and strategic goals.  Amanda is recognized for mentoring and leadership roles promoting diversity, and specifically “for her promotion of LGBTQ inclusion at Berkeley Lab, for her work to make the Lab a welcoming workplace for people of all communities, and her efforts to raise awareness of the Lab’s progress in diversity and inclusion.” More>

Qiang Du, Early Career Research Program Award (2017)

Qiang Du of the Engineering Division’s Electronics Engineering and Controls Group was among five scientists to be selected for the 2017 Early Career Research Program Award. Du’s award was titled “Scalable control of multidimensional coherent pulse addition for high average power ultrafast lasers”. The project was selected by the Office of High Energy Nuclear Physics and he will be working with the Accelerator Technology and Applied Physics Division.  For this project, Du will “design, build, and demonstrate a scalable distributed digital stabilization control system for robust multidimensional coherent combining of ultrafast fiber lasers, and make it available as a general toolbox in ultrafast optics control. High average power ultrafast lasers are essential tools that support fundamental science and applications.” . More >

Steve Holland, APS DPF Instrumentation Award (2016)

Photos Roger Smith, NOAO, AURA, NSF; Blanco webcam; Fermilab; Roy Kaltschmidt, Lawrence Berkeley National Laboratory

Photos Roger Smith, NOAO, AURA, NSF; Blanco webcam; Fermilab; Roy Kaltschmidt, Lawrence Berkeley National Laboratory

For decades, Steve Holland has designed CCD cameras and related technology for various applications – from medical detection to space exploration. He’s won several awards for this work including a Scientific Detector Workshop Lifetime Achievement Award in 2013. Now, he’s been awarded the 2016 Instrumentation Award from the American Society of Particle Physics, Division of Particles and Fields for “development of technologies for detection of signals in frontier experiments, especially the fully depleted charge coupled device and the “oscilloscope on a chip” integrated circuit.”
More >

Arnaud Madur, Berkeley Lab Director’s Exceptional Achievement Award (2015)

The ALS Brightness Upgrade Team led the largest improvement of the Advanced Light Source (ALS) storage ring since the facility was built in 1993. The brightness improvement enables experiments at the ALS to be executed more quickly and with better spatial and spectral resolution. Mechanical Engineer, Arnaud Madur, was the lead engineer for the team that led the emittance upgrade. Christoph Steier (Accelerator Technology and Applied Physics Division) and Arnaud Madur received a Berkeley Lab Director’s Exceptional Achievement Award in the Scientific category for their scientific achievement in improving the performance of the ALS beamlines.
More >

Peter Denes, Berkeley Lab Lifetime Achievement Award (2015)

 The Transmission Electron Aberration-corrected Microscope (TEAM) project revolutionized electron and x-ray microscopy in developing the world’s highest resolution electron microscopy instrument. As a testament to it’s achievement, the project won the Secretary of Energy’s Excellence of Acquisition Award in 2010. At the time, Scientist/Engineer, Peter Denes, was the TEAM project manager as well as the acting director of the Engineering Division. In result of this work, Peter Denes won the Berkeley Lab Lifetime Achievement Award for his scientific advancements in electron microscopy.
More >

Lee Yang, Berkeley Lab Director’s Exceptional Achievement Award (2015)

 A collaboration of experts from Berkeley Lab, Brookhaven National Laboratory, the University of San Diego, and Uppsala University broke the world record, achieving 3nm resolution with X-ray microscopy. The team built a new microscope based on ptychography, a novel mode imaging technique that uses high-performance scanning transmission X-ray microscopy. This capability is an important tool for energy sciences, as demonstrated in initial work on lithium iron phosphate batteries. Software Engineer, Lee Yang, was a member of the Berkeley Lab team that included Rich Celestre, David Kilcoyne, Stefano Marchesini, David Shapiro, Tolek Tyliszczak, and Tony Warwick. The team won the Berkeley Lab Director’s Exceptional Achievement Award in the Scientific category for their scientific advancements.
More >

https://engineering.lbl.gov/who-we-are/awards/

Qualified Electrical Worker (QEW) Support

Qualified Electrical Worker Support:

The Engineering Division has QEWs designated to assist with the fabrication, modification and repair of Laboratory electrical equipment in accordance with our Electronic Equipment Build Standards. Schedule the support of a QEW via one of the following methods:

Electrical equipment:
  • All Berkeley Lab unlisted (not UL or NRTL approved) electrical equipment must be inspected and approved before it can be used.
  • All LBNL  fabricated  or modified listed electrical equipment must be inspected and approved before it can be used.
  • See PUB 3000, Chapter 14 for details about Berkeley Lab’s Electrical Equipment Safety Program.
  • Schedule an inspection BEFORE using unlisted or modified equipment via email: eesp@lbl.gov

___________

Background:

On October 13th, 2014 the Berkeley Lab Director wrote Division Directors and Division Deputies to emphasize the importance of electrical safety in the conduct of scientific research.

The Laboratory continues to expect that all staff  understand and employ these fundamental electrical safety practices:

For non-qualified electrical workers {the vast majority of LBNL Staff}:
  • Do not perform any electrical work
  • Report unsafe equipment to your supervisor
  • Enlist the support of a Qualified Electrical Worker (QEW) for all electrical work
For qualified electrical workers (QEWs):
  • Lockout and Test Before Touch
  • Establish and control the workspace
Management:
  • Plan and control the work
  • Correct unsafe behaviors and conditions

Travel Policy Updates

You are required to login.php">login to view this page.

CAD System Software

 

Engineering develops software to support Computer Aided Design and Document Management. While most of the main applications are commercial, frequently custom software is required to tie systems together and create convenient user interfaces that implement Engineering CAD business models.

Steve Holland, Engineer/Extraterrestrial Rock Star

Steve Holland*Asteroid #40981 (1999 TL284)
Presented to: Stephen Holland, CCD Developer Extraordinaire

The Scientific Detector Workshop (SDW) is an international gathering of leaders in the development, production and implementation of various high performance detectors, from x-ray to infrared, for scientific applications. The 2013 SDW hosted 162 attendees from 90 different organizations, 18 countries, and 6 continents in Florence, Italy October 7-11, 2013.

During the workshop, Lifetime Achievement Awards were presented to recognize leaders in the Scientific Detector Workshop community who “made substantial and unique contributions over the course of their career”.  Stephen Holland, Senior Scientist/Engineer, was dubbed, “CCD Developer Extraordinaire” and presented Asteroid #40981, named in his honor, as an SDW Lifetime Achievement Award.

Stephen Holland is recognized as a pioneer in the development of high-performance silicon detectors for medical imaging, x-ray photon sciences, astronomy, and high-energy physics.  He led the development of thick, high resistivity p-channel CCDs that provide very high quantum efficiency in the near-infrared.  His CCDs operate in several observatories, including the dark energy camera (DECam) in Cerro Tololo, the BOSS spectrographs at Apache Point, the low-resolution spectrograph at the W.M. Keck Observatory, and exoplanet searches at Lick Observatory.

* Asteroid 40981 discovered October 9, 1999 by LINEAR at Socorro

Semiconductor Detector Laboratory


The Berkeley Lab’s Engineering Division Semiconductor Detector Laboratory provides the infrastructure and expertise for the development and production of semiconductor-based radiation detectors and detection systems. The facility consists of a class 100 clean room, class 10,000 processing and testing area, and a mechanical processing area. We use mechanical and wet chemical processing, thin film deposition, photolithography, wire bonding, and detector characterization to process Ge, CdZnTe, and SI. Several configurations are used including, diffused, implanted, surface barrier, and amorphous contacts, including strip, orthogonal strip, and point contact.

Data Acquisition and Control System Software

 

Many Engineering projects involve collecting scientific data and software is often used to facilitate this process. Specialized software is developed to meet requirements of the various sensors and data rates of the experiments and to process and store the data. In many projects, the need for Engineering Software goes beyond collecting data and includes controlling hardware such as power supplies, motors, heating and cooling equipment to support the experiment or facility. These software systems are often a collaborative effort with our scientific partners, but those components that interact directly with the low level sensor hardware are most often designed, constructed, and supported by Engineering Division software engineers. This software has tight integration with the low level hardware and often has difficult timing, processing and performance requirements that must be met for a successful experiment.

Undulators

 

An undulator is a periodic magnetic structure that serves as a critical component in synchrotron light sources and free electron lasers. Light, typically in the extreme ultraviolet to x-ray wavelengths, is produced when an electron beam passes through the periodic field. The wavelength is tunable by varying the magnetic field strength or the electron energy. Berkeley Lab’s Engineering Division has been at the forefront of undulator development since Klaus Halbach’s development of permanent magnet and hybrid (permanent magnet with high permeability poles) undulator structures, which was a key to the development of third and fourth generation light sources. In recent years, we have also been a leader in the development of NbSn3 superconducting undulators. The division designs and fabricates state-of-the art undulators for the Advanced Light Source. As one of the biggest construction projects we built approximately 60 undulators for LCLS-II, the world’s most powerful free electron laser at Stanford Linear Accelerator Center (SLAC).

Precision Mechanisms

 

Precision mechanisms are a class of machinery/instrumentation that often have micron scale features, or even larger components that have can range down to nanometer scale tolerances within surface, positioning, or motion. These systems have applications ranging from satellite technologies and particle accelerators to MEMS, and nanotechnology instrumentation. Our efforts include research, design, development, manufacturing and measurement of high accuracy components and systems. Some examples are X-Ray optics and metrology, X-Ray and electron microscopes, precision microscopes and large accelerator detectors. These systems are often cryogenic and installed in ultra high vacuum environments.

Composites

 

A composite is a combination of two or more materials that yield a new material with desired properties (i.e., non-magnetic/magnetic or non-conductive/conductive).  Our specialization is in design and fabrication of high performance Carbon Fiber structures and precision bonded assemblies (incorporating both metallic and composite components) for Silicon Tracking Detectors. Using carbon fiber composites, we design very low mass, ultra-stable support structures for Silicon Tracking Detectors used in High Energy and Nuclear physics experiments. Our designs often integrate cooling, data, and power into the support modules. In addition to Silicon Tracking Detector Structures, we use carbon or other fiber composites to develop supports for other structures, including apparatuses at the Advanced Light Source (ALS). The Berkeley Lab Engineering has developed techniques and tooling to design and fabricate these structures with precision.

Advanced Manufacturing

 

An Advanced Manufacturing Center (AMC) at Berkeley Lab is being explored to establish various advanced manufacturing technologies and serve a wide range of manufacturing needs internally as well as externally. We are developing capable manufacturing technology to meet increasing diversification of material used and tighter tolerances in science exploration and industrial production. AMC will initially focus on ultra-precision machining technology, which could provide an array of material selections, tens of nanometer form accuracy, and few nanometer surface quality with a full 3-D feature capability.

Vibration Analysis & Control

 

Vibration is a mechanical phenomenon whereby oscillations occur about an equilibrium point. The oscillations may be periodic or random but most often, vibration is undesirable. To mitigate the impact of vibration, we can either decrease the intensity of the vibration source or decrease the sensitivity of the equipment. Vibration sources and equipment sensitivity can be characterized using measurements from seismometers, accelerometers, or interferometers. We analyze the measurements to determine what structural improvement, vibration damping and/or isolation strategy can be implemented to mitigate the impact of vibration. Environment vibration measurements, careful design, and predictive modeling using modal analysis or harmonic response can be used to evaluate performance.

Robotic Systems & Motion Control

Colony picker sterilizer
Colony picker sterilizer
Colony picker sterilizer
Colony picker, deep well, and orca robot for Human Genome Project
Colony picker, deep well, and orca robot for Human Genome Project

 

In industry, motion control and robotics is typically used to automate the movement, transport, or assembly of components or products in the manufacturing process. At the Berkeley Lab, motion control and robotics are used to automate scientific tools, improving the speed and quality of data acquisition. Our motion control applications include laser and X-ray optics alignment, sample positioning, precision control of magnet assemblies and speed control for audio reconstruction.  Robots are used in special applications and particularly in highly repetitive task in genomics that can be replaced by a pick-and-place robot, or a task in an exclusion area such as placing a protein crystallography sample on a manipulator to perform X-ray diffraction. For both these tasks throughput is increased and error reduced by eliminating human operators.

Pulsed Power and High Voltage

 

Pulsed power is a field of research which explores methods of providing high peak power (the product of the voltage and the current) to a load in the form of short pulses (nanoseconds to microseconds duration). These systems typically include a primary power supply, energy storage capacitor, and a switch which transfers the pulse of energy to the load. Loads may be electromagnets, induction accelerator cells, electrostatic accelerator electrodes, plasma sources, antennas, and microwave vacuum tubes. Research includes efficient energy conversion and storage techniques, high performance switching, and precision pulse shaping.

High voltage (kilovolts to megavolts) is associated with pulsed power systems, but some applications, like particle detectors, require continuously applied high voltage (not in the form of short pulses) and do not require high peak power. High voltage systems require careful design so that the electric fields created do not exceed the breakdown threshold of the dielectric (air, vacuum, plastic, etc.) which is between the high voltage electrode and ground. Electrostatic simulations and high voltage testing are used to qualify designs.

Project Planning & Controls

Recipients of the 2012 Department of Energy (DOE) Project Management Awards includes Engineering Project Planning and Controls Group Leader. The Bevatron Demolition Project received the Secretary’s Award for Excellence and the Daya Bay Reactor Neutrino Detector Project received the Secretary’s Achievement Award.

 

The Project Controls Engineering Department provides project controls expertise, project control engineering, planning, and an Earned Value Management System (EVMS) based on DOE Order 413.3B and the ANSI/EIA-748-C guidelines to integrate project management elements required to effectively plan, organize, and control complex projects across the laboratory. The LBNL EVMS provides a comprehensive system for schedule, budget and technical performance management, measurement and reporting and for effective project execution using earned value management. The requirement to use the LBNL EVMS applies to all funded projects with a total project cost greater than or equal to $50 million regardless of funding source. For projects smaller than $50 million, a graded approach is being used for implementing and supporting the LBNL EVMS without overburdening the projects.

fs Timing and Synchronization

Scientific experiments which interact two or more short-duration events must synchronize them in time. Laser and X-ray light sources can now produce pulses with few-femtosecond (1 femtosecond = 0.00000000000001 seconds) or sub-femtosecond duration, requiring precise timing. It is possible to measure and control the timing of lasers with this precision, using stable RF and optical frequencies transmitted over fiber optics. A combination of optical and electronic technology has been developed to support short pulse X-ray and optical science at large user facilities.

Feedback Controls

 

In feedback controls, the controlled output of a device is measured and fed back for use in a control computation. We utilize feedback controls in a variety of applications ranging from LLRF to synchronization of optical pulses with femtosecond accuracy over kilometers of fiber, and beam-based feedback applied to Linac-driven Free Electron Lasers (FELs). We have particular expertise in the use of feedback controls for particle accelerators, which is essential to modulate various physical quantities in the presence of external disturbances such as variations in temperature, pressure, variability of electronic components, mechanical couplings, etc. The orbit of particles in an accelerator and other parameters influencing performance of the beam are also controlled using feedback.

Custom Integrated Circuits

 

The LBNL IC group delivers high-performance mixed-signal integrated circuits for a variety of applications, but specializes in integrated circuits for particle detector and scientific imager readout. We focus on providing high channel-count mixed-signal chips for extreme environments (e.g. high radiation, low temperature, or in-vacuum operation) where suitable commercial parts do not exist. Our core capabilities include ultra-low-noise analog front ends, high-performance data converters, CCD imager clock drivers, and CMOS active-pixel sensors for scientific imaging. We offer complete integrated solutions including power management, clocking, and serial digital data interfaces. We have design capabilities in a wide range of IC technologies including mixed-signal, SOI, and High-Voltage CMOS, and have delivered integrated circuits fabricated in CMOS process nodes from 3 μm down to 65 nm.

Custom Integrated Circuits Capabilities >>

Survey & Alignment

 

The Survey & Alignment Group is responsible for the accurate positioning of accelerator and instrumentation components using precision surveying techniques and engineering methodologies. The capabilities include fiducialization, inspection, metrology and alignment. This group utilizes state of the art tools such as laser trackers, laser scanning & interferometry, digital levels, coordinate measuring machines, metrology arms and ground penetrating radar.

 

Employee Resources

Building the Next Generation of Berkeley Lab Science & Engineering Leaders

April 25, 2024

Over the years, Berkeley Lab has built a reputation for excellence and scientific leadership through strategic talent development. In an interview with ‘Research News’, Jens Birkholzer, Henrik von der Lippe, and Tina Clarke discussed talent acquisition and management at division level, highlighting HR’s role in fostering the next generation of talented leaders, scientists, and engineers across the lab.

Berkeley Lab’s Engineering and Nuclear Science Divisions host ‘High School STEM Day’ activities on March 20

April 8, 2024

Berkeley Lab’s Engineering and Nuclear Science Divisions hosted tours and activities for visiting high school students as part of ‘High School STEM Day,’ a monthly program offered by Berkeley Lab’s K-12 STEM Education and Outreach Program and the WSEC.

Divining the Mysteries of the Atomic Nucleus

February 15, 2024

Heather Crawford and Berkeley Lab’s GRETA project are featured in this recent article in ‘Chemical and Engineering News,’ which highlights how new research is illuminating the most powerful force in the universe.

Mike Witherell: Seeking Big Impact from Big Science

January 25, 2024

The BELLA Center, DESI, and Berkeley Lab’s ongoing collaboration with the SLAC National Accelerator Laboratory are all highlighted in this ‘Physics World’ interview with Berkeley Lab Director Mike Witherell, in which he describes why effective stewardship is essential for long-term research success.

First U.S.-Built Focusing Magnet for LHC Upgrade Arrives at CERN

December 19, 2023

After 20 years of research, development, testing, and production, the U.S. is now shipping state-of-the-art superconducting accelerator magnets to CERN for the high-luminosity upgrade to the Large Hadron Collider. At the heart of these powerful magnets is a new superconducting material used for the first time in a particle accelerator. Experts in Berkeley Lab’s ATAP and Engineering Divisions turned superconducting wire into the cables used to make the magnet coils.

Project Leadership Institute Highlights

December 13, 2023

Congratulations to Daniela Leitner, Lisa Ehlers, and Jenny Ledesma for recently completing a year-long Project Leadership Institute (PLI) training course as part of the 2023 cohort. The PLI program provides a unique opportunity to learn and develop valuable leadership skills with an emphasis on their application in successful execution of DOE projects.  

Berkeley Lab Develops Next-Generation Staves and Strip Detector Technology for HL-LHC 

December 11, 2023

A team of Berkeley Lab physicists and engineers are developing advanced silicon tracking technology for the 2029 high-luminosity upgrade of the Large Hadron Collider (LHC) at CERN, requiring the replacement of the ATLAS experiment’s Inner Detector with a multi-layered silicon Inner Tracker (ITk). The project involves fabricating and testing around 2,000 silicon strip modules, part of Berkeley Lab’s contribution to the ATLAS upgrade, where the newly designed staves streamline the installation process and accommodate the increased complexities of the ITk. To learn more, click on the link above. 

Berkeley Lab Develops Next-Generation Pixel Detector and Readout Chip Technology for HL-LHC

October 20, 2023

A team of Berkeley Lab physicists and engineers are developing next-generation pixel detector and readout chip technology for LHC’s high-luminosity upgrade at CERN. To learn more, click on the link above.

Dan Dwyer Receives 2023 APS DPF Instrumentation Early Career Award

October 19, 2023

Berkeley Lab physicist Dan Dwyer has received the 2023 APS DPF Instrumentation Early Career Award for his work on LArPix. Read more about Dwyer’s development of LArPix, Berkeley Lab’s new 3D pixel tile detection system for DUNE, which was carried out in close collaboration with Carl Grace and the ASIC group in the Engineering Division.

Revolutionizing Science with First-of-its-Kind Scientific Tools at the Lab

September 20, 2023

Dan Dwyer (the head of the neutrino physics group in Berkeley Lab’s Physics Division) and Carl Grace (a staff scientist and engineer in the Engineering Division), and their team’s development of the LArPix and Hydra I/O systems, are featured in this new article from LBNL Research News. To read the full article, click on the link above.

SLAC fires up the world’s most powerful X-ray laser: LCLS-II ushers in a new era of science

September 18, 2023

The newly upgraded Linac Coherent Light Source (LCLS) X-ray free-electron laser (XFEL) at the Department of Energy’s SLAC National Accelerator Laboratory has successfully produced its first X-rays. With up to a million X-ray flashes per second, 8,000 times more than its predecessor, the LCLS-II upgrade enables scientists to explore atomic-scale, ultrafast phenomena that are key to a broad range of applications, from quantum materials to clean energy technologies and medicine. Berkeley Lab’s Accelerator Technology & Applied Physics (ATAP) Division and Engineering Division played a lead role in developing several critical LCLS-II components, including the magnet arrays, the state-of-the-art injector that provides the electrons, and the control system that manages the beam.

CMB-S4 announces L2 and L3 management changes for the detectors subsystem

September 8, 2023

CMB-S4 Director Jim Strait recently announced Level-2 and Level-3 management team changes for the detectors team. Kelly Hanzel, an experienced Berkeley Lab engineer and project manager since 2011, will become the Level-2 Control Account Manager (CAM) for the CMB-S4 detector subsystem, with expertise from various DOE projects including LCLS-II, ALS-U, and the LZ dark matter detector. Rebecca Carney, a staff engineer at Berkeley Lab’s ESIE Department, will assume the role of Level-3 Manager for the LBNL-SEEQC segment within CMB-S4’s detector subsystem. Her background encompasses ATLAS and LEGEND experiments, specializing in radiation-hard pixel detectors. These new leaders, Hanzel and Carney, will join the CMB-S4 team in mid-September 2023, enhancing the project’s capabilities. For more information, click the link above.

Cabling for LHC Upgrade Wraps Up

August 30, 2023

Berkeley Lab’s experts have successfully wound over 2000 kilometers of superconducting wire into cables, a crucial step in upgrading the Large Hadron Collider and advancing the search for new physics. A remarkable collaboration between the Accelerator Technology & Applied Physics (ATAP) Division and Engineering Division made this achievement possible.

Berkeley Lab Director’s Review of the Engineering Division held on June 13-15, 2023

July 17, 2023

The Berkeley Lab Director’s Review of the Engineering Division took place on June 13-15, 2023. An internal review held every three years, this gathering entails Division engagement with a panel of expert reviewers who are invited to evaluate the Division “as a world-class organization supporting the scientific goals and initiatives of LBNL.” This year’s external review committee included representatives from other national laboratories including Fermilab, Princeton Plasma Physics Laboratory, SLAC, and Jefferson Lab. Their final Summary Report was released on June 26, 2023.

LEGEND-200 Enters Data Production Phase

July 12, 2023

The first phase of the LEGEND experimental program – LEGEND-200 – recently entered its production data-taking phase. Preliminary calibration results of LEGEND-200 demonstrate the superior performance of the HPGe readout electronics system. The dynamic LBNL LEGEND-200 team comprises accomplished individuals such as research scientist Alexey Drobizhev, project scientist Bjoern Lehnert, senior staff scientist Alan Poon, and postdoctoral fellow Ann-Kathrin Schuetz from Berkeley Lab’s Nuclear Science Division, and engineers Rebecca Carney and Marcos Turqueti from Berkeley Lab’s Engineering Division. To learn more about this project, click the hyperlinked title above.

LarPix: Berkeley Lab’s New 3D Pixel Title Detection System for DUNE

June 22, 2023

A team of engineers and scientists in Berkeley Lab’s Engineering and Physics Divisions have conceived, developed, and built a prototype 3D pixelated detection system for DUNE, the Deep Underground Neutrino Experiment. DUNE is an international flagship experiment focused on neutrinos, the study of which may help researchers understand the mysterious balance of matter and antimatter in the universe. For more details and access to the full article, click the link above.

Berkeley Lab Engineering Efforts During the ALS-U Summer 2022 & Winter 2023 Shutdowns

May 1, 2023

Click the link above to watch the video highlighting recent updates from the ALS-U, an ongoing upgrade of Berkeley Lab’s Advanced Light Source. Berkeley Lab Engineering Division staff are fully integrated into this long-term project, and several are featured here. Andrew Lodge is the lead engineer, Doug Fuller is the manufacturing engineer, and Kyle McCombs is the technician supervisor and coordinator for ALS-U Removal and Installation. Christoph Steier, a senior scientist in the ALS-U Division responsible for managing the Accelerator Systems, is also featured in the video. Daniela Leitner, a senior scientist in the Engineering Division and Division Science Deputy, leads ALS-U Removal & Installation.

In Remembrance of Richard C. Jared, 1938–2023

April 27, 2023

Richard passed away peacefully on Friday, March 3, 2023, after a valiant battle with Alzheimer’s Disease diagnosed in 2014. A beloved husband/father/brother/mentor who will be missed by everyone he met. Richard was born October 24, 1938, in Coalinga, California, and grew up in the Bay Area and Lake Tahoe, Nevada. After his honorable discharge, he and his family returned to California, where he was hired at the Lawrence Radiation Laboratory in 1961 as an Electronics Technician, where he built his career working on electronics instrumentation in support of high-energy physics and nuclear science.

Two From Lab Elected APS Fellows: Daniela Leitner and Ehud Altman

October 20, 2022

Congratulations to Daniela Leitner, a senior scientist in the Engineering Division and division deputy, for being elected as 2022 American Physical Society (APS) Fellow! Daniela is recognized for her work on electron cyclotron resonance ion sources that are widely used as high-charge state ion injectors for heavy ion facilities.

3Q4 with Senajith Rekawa

August 30, 2022

Rekawa is now Chief Engineer and Deputy Director for Operations at the Center for X-Ray Optics (CXRO). He won a Director’s Award in 2021 and was a recipient of the Klaus Halbach Award for Innovative Instrumentation at the ALS, among other honors, and is active in IDEA. In 2021, he was elected president of the American Society for Precision Engineering. The Lab recently interviewed him to learn more about Rekawa’s work in the Engineering Division.

Lawrence Berkeley National Laboratory Unveils ASIC Chip Failure Bypass System

February 22, 2022